Availability
These NHRA and IHRA-accepted premium alloy axles from Moser Engineering are custom-built specifically for your vehicle. They are induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier, so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. They come available with a press-fit or screw-in stud axle flange and a choice of stud diameters. Studs are not included. All Moser axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously, each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing ®. All custom-order axles are Special Order and Non-Returnable.
( 15 )
$255.00
—
$499.00
These NHRA and IHRA-accepted premium alloy C-clip axles from Moser Engineering are custom built specifically for your vehicle. Induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. Available with a press fit or screw in stud axle flange and choice of stud diameters. Studs not included. All Moser C-clip axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing. All custom order axles are Special Order and Non-Returnable.
( 6 )
$255.00
—
$390.00
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength custom order driveshaft assemblies. The 3.5 in. diameter tubes are custom-drawn for consistent strength, and the forged yokes are welded on using state-of-the-art processes for improved reliability. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
( 15 )
$483.49
—
$524.88
HardDrive offers full spoke billet pulleys for a variety of applications, including many Harley-Davidson© street bikes from 1984 and up. The full spoke rear drive pulleys are designed to match the stylish HardDrive 48-Fat Spoke wheels. They're CNC-machined from 6061 billet aluminum and are available in chrome or powdercoated gloss black. These direct bolt-on pulleys fit most OEM and aftermarket wheels. Not cush-drive applicable.
Not Yet Reviewed
$278.96
—
$302.36
Clearance
Dorman pinion yokes are direct replacements for a proper fit and trouble-free performance. Engineered from cast iron for long-lasting durability, their driveshaft pinion yokes include high-quality seals constructed from a combination of rubber, metal, and plastic to prevent lubricant from leaking. These quality Dorman pinion yokes deliver no-hassle installation with headache-free operation.
( 5 )
$269.99
C-clip eliminators, which were originated by Strange Engineering, are required by drag racing rules for good reason. C-clip type axles are retained by a clip above the spline portion of the axles. When the stock axle or differential breaks, the entire axle/brake/wheel assembly can slide completely out of the housing. Strange's C-clip eliminators eliminate wheel loss and worn bearing areas. The bearings are retained and the axles are held securely in place by the C-clip eliminators, which are bolted to the stock axle housing through the existing backing plate holes.
( 24 )
$384.99
Strange chromoly fully assembled driveshafts are designed to handle the high horsepower of today's engines. And, they're offered at mild steel prices! Their seamless chromoly shafts are heat-treated and feature 1350 or 1480 Spicer precision, self-lubricating U-joints. Strange fully assembled driveshafts include weld ends that are properly phased and installed. Plus, every shaft is electronically balanced and has a total indicated runout of less than .008 in.! DOM shafts are carefully MIG-welded with Spicer HD weld ends and U-joints. The seamless chromoly shafts are meticulously TIG-welded and fitted with Strange forged chromoly weld ends and Spicer U-joints. Buy a driveshaft made for the harshest conditions--Strange chromoly fully assembled driveshafts.
( 59 )
$418.99
Quarter Master crankshaft drive hubs put you back on track! These hefty steel hubs are black oxide coated and are available in many sizes to fit your applications. Whether you need race-quality replacements for your clutch or clutchless transmissions, Quarter Master supplies track-tested crankshaft drive hubs that will keep your race car moving ahead of the pack.
Not Yet Reviewed
$259.44
—
$268.58
American Powertrain's Science Friction flywheels are available for most GM, Ford, Mopar, and AMC V8 engines. Their high-performance billet steel or lightened billet steel flywheels work best on the street for smooth performance—and for drag racing where the flywheel stores energy for hard launches. Billet aluminum flywheels are preferred for high-revving engines and in road racing where rapid rpm gain is essential. More than 50 models and configurations are available; order the flywheel recommended for your engine application. Features include: * High-grade billet steel or aluminum * Heavy-duty ring gears (with welded tabs on aluminum flywheels) * SFI certification is available on every flywheel * 20 percent lightening is available on steel flywheels * Double Blanchard-ground steel friction plates on aluminum flywheels * Aluminum flywheels have aircraft-grade riveted friction plates
( 13 )
$349.95
Quarter Master steel driveshafts feature unsurpassed strength and smooth, vibration-free performance. Built from durable, quality steel, these driveshafts are matched with ultra-durable slip yokes and U-joints to ensure a perfect driveshaft combination. Move your driveline forward with high-quality steel driveshafts from Quarter Master.
( 1 )
$435.97
—
$484.94
Best the rest with aluminum driveshafts from Quarter Master. What makes them better? Quality material selection, rigid tolerances, careful attention to detail during assembly, and a balance spec to less than .125 in.-oz. are what set these driveshafts apart from the rest. Quarter Master's weld-free assembly process eliminates distortion and loss of heat strength. The assemblies are computer-balanced for smooth, vibration-free performance. Get performance by design with lightweight Quarter Master aluminum driveshafts.
( 2 )
$384.68
—
$428.84
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 364 )
$291.99
—
$443.99
On Sale
Replacing older OE converters can be a challenge, often compelling customers to settle for makeshift solutions. You can remedy such an issue by choosing a LuK Clutch TorCon torque converter to restore smooth shifting to your automatic transmission. LuK's selection of converters provide the correct fit and function, covering a wide range of vehicles, assuring you will be able to find the proper unit for your vehicle.
( 2 )
$314.99
—
$575.99
$283.49
—
$518.39
On Sale
Hurst Competition/Plus shifters have been the benchmark of transmission control and race-proven since 1963. When you are ready to install one, be sure to choose the correct kit for the right fit. Hurst Competition/Plus shifter installation kits are custom designed to fit directly into your vehicle, with the least possible modifications, and to give you firm positive shifts every time. They come with everything necessary (shifter not included) to install your Hurst Competition/Plus shifter in your car. Features: * All parts, hardware, and installation instructions * Hardened steel shift linkage rods * Nylon bushings and spring clips * Shifter mount plate
( 213 )
$425.95
$269.95
—
$382.95
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
When you need strength for your custom axle job, Yukon Gear & Axle cut-to-fit axle shafts should be your choice. Built to last, these Yukon axles are offered in hardcore 4340 chromoly and 1541H alloy steel. Built to perform, they offer more strength than stock styles and come in your choice of cut-to-fit/cut-to-length designs. Choose quality-built strength for your application with Yukon Gear & Axle cut-to-fit axle shafts.
( 33 )
$252.99
—
$452.99
On Sale
The industry standard for over 30 years, Hurst Competition/Plus shifters offer state-of-the-art control for popular 4-, 5-, and 6-speed manual transmissions. Dedicated applications ensure a custom fit on a wide variety of vehicles with factory consoles without any floor pan modifications. Other features include race track-proven design and reliability, adjustable gear stops to prevent over shifting and prolong transmission life, and an easy-to-follow installation guide.
( 121 )
$279.95
—
$599.95
$251.95
—
$515.95
McLeod Non-SFI aluminum bellhousings are the gold standard when it comes to accuracy and compact performance. These Non- SFI rated version is for those customers looking for a light weight bellhousing, but not concerned with a SFI rating so these units do not come with a steel block plate.
( 7 )
$295.00
Moser Engineering replacement alloy axle shafts feature high-quality materials that can stand up to everyday use. They use the finest alloy for these replacement shafts, giving you a custom alloy shaft that has been induction heat-treated, 100 percent magna-fluxed, and has a hardened bearing seat for years of worry-free use. Available for passenger car, truck, and SUV applications, Moser Engineering replacement alloy axle shafts are the perfect fit for your vehicle.
( 57 )
$255.00
—
$499.00
Hybrid Racing offers short shifter assemblies for a variety of applications, including many Honda© and Acura© models from 1988 and up. These economical units feature an unparalleled level of adjustability so drivers can tweak every aspect of the shifter to suit their own preference. The shifters' frame is constructed from TIG-welded, powdercoated, 1000 Series steel. The anodized upper and lower rocker assemblies are now made of single pieces of aerospace-grade aluminum, with custom sealed ball bearings to reduce friction. The new V2 shifter, for instance, is 60 percent smoother than the original version, requiring much less physical effort to row through gears all while being significantly lighter. Shift throw adjustment is achieved using two threaded cable attachment pins, meaning fine tweaks can be made to shift throw, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin© pivot cap for sturdy, quiet operation. New dual, zinc-plated extension springs replace the OEM-style torsion centering spring for better-centering action and a more direct feel. The front/back throw and left/right throw can be adjusted independently; and most models include shift knob height adjustment. Simple single-bolt height adjustment design (borrowed from the popular K-swap shifters) allows the knob to be adjusted higher or lower than stock (within a 1.5 in. total range) with only a 5mm Allen wrench. Now you can tweak the shifter's throw AND knob position independently until the shifter functions exactly the way you want it to. Enjoy smooth, precise, and direct shifts with a new short shifter assembly from Hybrid Racing!
Not Yet Reviewed
$306.84
—
$408.49
Summit Bucks
Sonnax adapter flange yokes are an ideal upgrade for modified performance vehicles, allowing an easy conversion from a 2-piece driveline to a one-piece, U-joint-style driveline. The yokes will dramatically increase strength and durability while reducing future maintenance costs. Benefits: * Machined 6061 T-6 aluminum construction * Eliminates the troublesome giubo and/or CV joint(s) * Great for drivetrain swaps and retrofits in custom applications, such as street rods and hot rods
Not Yet Reviewed
$287.66
—
$311.37
Advance Adapters Chevy to Jeep transmission adapter bellhousings are perfect for use when installing a GM powerplant in your Jeep. They make assembling your custom drivetrain a no-hassle affair. Their housings are manufactured from 356-T6 heat-treated aluminum alloy for strength.
( 12 )
$368.56
—
$507.41
Strange offers their rear axle housings in a variety of configurations, from just the center housing to complete, ready-to-bolt-in assemblies. The axle housings are designed and manufactured to be more rigid and stronger than OEM housings. Depending on the application, they're fabricated from proprietary nodular iron (substantially stronger than cast iron) and other quality materials—then fixture-welded to ensure proper alignment; slotted for full tube engagement; and reinforced at critical areas to reduce center section and axle tube flex. Whether your car is headed for the street, the track, or the drag strip, customize the rear-end with a Strange rear axle housing so it will meet or exceed your expectations.
Not Yet Reviewed
$334.99
Lokar LED dash indicators will tell you what gear your transmission is in. Made from billet aluminum, these functional accessories offer your truck, street rod, or muscle car a stylish, custom look. Available in horizontal or vertical mount versions, the indicators can be purchased with or without the sensor kit (however, a sensor kit is required for operation). Order the model recommended for your transmission application.
( 16 )
$288.48
—
$357.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
