Availability
Advance Adapters 6-bolt to 4-bolt tailshaft adapters are designed for 1996 and newer electronically controlled GM 4L60E transmissions with a hex bolt pattern on the output side of the transmission. They provide a 700R-style pattern for easy fitment of other adapters produced by Advance Adapters, and are 1.500 in. long. The heart of these systems lie in the new clamp-on reluctor ring and sensor which sends a 40 pulse per output revolution signal to the drivetrain control module. These adapters are manufactured from 356 T-6 heat-treated aluminum alloy and also include a GM VSS sensor, fastening hardware, and instructions. Make adding adapters and/or a transfer case easier with Advance Adapters 6-bolt to 4-bolt tailshaft adapters.
( 13 )
$305.97
Hybrid Racing offers A2 K-Series Swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, they created the very first Bolt-In K-Series swap shifter. The Hybrid Racing Bolt-In K-Swap shifters allow you to retain the stock center console in your EF, EG, EK, and DC chassis and only require drilling two small holes. They work with both stock DC5 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose Hybrid shifters not only for their reliability but for ease of installation and adjustability. The front/back throw can be adjusted to three different settings (100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The left/right throw can also be adjusted to three different settings (again, 100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The shift knob can be adjusted to up to 3 in. vertically, and the aluminum offset block can be rotated 360 degrees. They accept M10 x 1.5 shift knobs.
Not Yet Reviewed
$408.49
Hybrid Racing offers Z3 K-Series swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, Hybrid created the very first bolt-in K-Series swap shifter. Nearly 10 years and thousands of shifters later, Hybrid Racing presents the latest evolution of its innovative design. The bolt-in K-Swap shifter allows you to retain the stock center console in your EF, EG, EK, and DC chassis and only requires two small holes to be drilled. It works with OEM Honda 06-11 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose K-Swap shifters not only for their reliability but for ease of install and adjustability. The front/back throw can be adjusted to two different settings (75 percent stock throw, and 40 percent stock throw). The left/right throw can also be adjusted to two different settings (again, 75 percent stock throw, and 40 percent stock throw). Shift knobs can be adjusted to up to two inches vertically, and the aluminum offset block can be rotated 360 degrees. In the box: * (1) Bolt-in shifter * (2) Small cotter pins * (1) Cable stay bracket * (1) Hardware pack * 7 flat washers, 3 small, 4 large * 7 Allen head bolts, 3 small, 4 large
Not Yet Reviewed
$408.49
Artec Industries 14-bolt modular trusses yield stronger, sleeker axles that are easier to fit into most any vehicle. If you're doing a swap these modular units are perfect. The heavy-duty trusses are designed to reinforce your axle for serious abuse, plus they provide a flat surface to mount your upper links. Their beefy, low-profile build features 3/8 in. thick truss tops fortified with 1/4 in. thick gussets—a unique design that strengthens both the axle and the link mounting surface. They're also shorter, allowing use with factory leaf spring perches or Artec add-on coil or leaf spring perches. For more muscle with added versatility, choose the quality of Artec Industries 14-bolt modular trusses.
( 1 )
$279.99
Artec Industries 14-bolt rear axle trusses are heavy-duty support systems that set your rig up to take serious abuse. Plus, they reinforce your entire axle while also providing a flat surface to mount your upper links. These burly 14-bolt units feature 3/8 in. thick truss tops fortified with 1/4 in. thick gussets—a unique design to strengthen both the axle and the link mounting surface. Artec offers the trusses for both single and dual rear wheel axles. Or, to create a more armored system, choose their combo option that includes pinion guard and bridge to protect your vulnerable pinion from rocks and keep it in one piece! Beef up your rear axle to handle the worst the terrain has to offer with Artec Industries 14-bolt trusses.
( 3 )
$419.99
Wilwood five-bolt drive flanges are machined from 7075-T6 alloy and have a longstanding reputation for durability and performance. Each Wilwood five-bolt drive flange kit includes an end plate with screws, along with drive bolts and lockwashers.
Not Yet Reviewed
$301.05
Summit Bucks
Sonnax flanged yokes will complete your driveshaft connection. These high performance 6061-T6 aluminum parts are precision-machined to be stronger than the original cast steel yokes, as well as being lighter in weight. Sonnax builds these yokes for exceptional balance and superior craftsmanship, for a show-quality driveline.
( 23 )
$262.46
—
$282.02
Classic Performance rear axle conversion kits convert your rear to a 5-lug. If you've upgraded your 6-lug truck to a 5x5 in front, then you need to do the same in the back. These kits come complete with axles and may include spider gear and drums as well. Complete your 5-lug conversion with rear axle kits from Classic Performance.
( 53 )
$288.99
—
$318.99
Tilton's 6100-Series hydraulic release bearings feature race-proven Tilton reliability for the street. These hydraulic release bearings have been designed for ease of installation and maximum reliability, at a very competitive price. 6100-Series hydraulic release bearings are designed to mount onto the transmission input shaft bearing retainer, and are compatible with a variety of transmission types.
( 49 )
$442.00
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 364 )
$291.99
—
$439.99
Ford Performance Parts axle girdles are a great way to strengthen the rear-end of your car. Made of lightweight aluminum, they incorporate load bolts that provide additional support for differential bearing caps. Because they reduce the amount of flex in your differential while under load, they significantly reduce bearing wear and chipped teeth on the ring and pinion. They provide increased ring and pinion gear life and are a definite must for all racing and high performance street cars. Additional information: * Available for a variety of applications, including some independent rear suspensions * Replaces OE rear cover * Covers with cooling fins and machined for differential cooler pickup and return fittings recommended for road racing or extended high-speed/high-temperature applications * Models equipped with differential coolers may require modifications * Check exterior clearance to chassis/suspension
( 77 )
$252.99
—
$301.99
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
FTI Performance Powerglide transmission pumps are 7-bolt pumps designed for vehicles with ringed or ringless input shafts. They are high-quality transmission pumps that will easily exceed the quality and performance of your factory pump. For all of your transmission pump needs, FTI Performance has you covered.
( 7 )
$469.00
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 137 )
$411.00
—
$443.00
Our Summit Racing™ Billet SFI-approved flexplates are built for racing. They're thicker than stock, double-welded with a forged one-piece ring gear. Summit Racing™ Billet SFI-approved flexplates are the superior choice for quality and precision.
( 4 )
$381.99
—
$434.99
Made on state-of-the-art CNC equipment, ATI SFI flexplates are double MIG/TIG-welded with certified American-made materials that far exceed SFI specs for safety. They're manufactured and toleranced from actual OEM drawings to ensure precise fit and location. Each is quality-inspected to exceed the flatness and runout tolerances of the OEM units. They are also precision-balanced on Hines digital equipment with a resolution of 1/10 oz. per inch. Available in dozens of configurations, ATI SFI flexplates can be ordered for fitment on vehicles covering every decade since the mid-1950s.
( 74 )
$258.99
—
$329.00
Richmond Gear is the leading manufacturer of professional-quality, high performance ring and pinion sets. The superior quality of these gear sets is the result of years of racing development, outstanding design, and state-of-the-art manufacturing methods. Richmond also offers these gear sets in a lightened version for the weight-conscious enthusiast. Their lightened ring and pinion sets feature an outstanding rotating weight loss of up to 6 lbs., ground pinion threads for trouble-free installation, and a special heat treatment for improved strength.
( 309 )
$264.70
—
$666.99
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 142 )
$251.69
—
$565.99
Axles are important components in your drivetrain. When you need to replace a bad axle, choose Summit Racing™ direct fit axle shafts. These axle shafts are designed to equal or better your OEM replacements and beat outrageous dealer pricing. Manufactured from 1541H steel, these strong axle shafts come with wheel studs, bearings, and seals to finish the job right. So, if you've got an axle to replace, team up with Summit Racing™ and our direct fit axle shafts for an affordable, winning solution.
( 269 )
$253.99
—
$422.99
Tilton 6000-Series hydraulic throwout bearings feature race-proven reliability for the street! They have been designed for easy installation and maximum reliability at a very competitive price. The bearings feature a stainless steel threaded bearing retainer-mount sleeve that offers nearly 1.25 in. of adjustability, enabling them to be used with most 8.5 to 10.5 in. bent-finger, diaphragm-type clutches. The Tilton 6000-Series hydraulic throwout bearings include a -4AN stainless steel braided line supply line, a bleed line and fittings, a stainless steel threaded adjustment sleeve, and a special bearing retainer bolt.
( 2 )
$454.75
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 47 )
$371.95
—
$519.95
Allstar Performance torque converters offer power and economy for your moderate drag racing, factory, or street stock machines. These Allstar converters are completely remanufactured with new pump drive hubs and thrust washers. Choose from several stall speeds for your GM, Chrysler, or Ford transmission. Exact stall speeds will vary, depending upon displacement, torque, and vehicle weight. Transfer your engine torque with value-priced Allstar Performance torque converters.
( 9 )
$319.99
—
$339.99
Banks Ram-Air differential cover are unlike any others. After testing covers with flat-backs and those with larger fluid capacities, it was apparent that those covers do not cool as well as advertised and suffer from poor fluid dynamics. As a result, flat-backs reduce fuel economy. Banks Ram-Air differential cover extends lubrication life and retains fuel economy! Features: * A380 aircraft aluminum diecast for exceptional strength and precise fit * 12-point chrome plated flanged mounting bolts * 24 external radiator fins offer 534 sq. in. of surface area to ensure optimal heat rejection * Ram-Air system directs cool high-velocity air through radiator fins, eliminating the dead zone * Designed with breakaway scoops * Magnetic fill plug with 20 degree angle for easy fill--simplifies oil changes * Sight-glass with contrast screen and Viton® O-ring seal * Recessed magnetic drain plug simplifies oil changes
( 35 )
$375.00
—
$425.00
When you need strength for your custom axle job, Yukon Gear & Axle cut-to-fit axle shafts should be your choice. Built to last, these Yukon axles are offered in hardcore 4340 chromoly and 1541H alloy steel. Built to perform, they offer more strength than stock styles and come in your choice of cut-to-fit/cut-to-length designs. Choose quality-built strength for your application with Yukon Gear & Axle cut-to-fit axle shafts.
( 33 )
$314.99
—
$452.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
