Availability
These Lokar indicator control modules are designed to control the LED indicator display. They are made of billet aluminum and include all necessary mounting hardware. They are available for a dash mount or shifter boot mount, and the LED display is sold separately.
( 7 )
$277.95
Dorman transmission control modules have been thoroughly tested to offer the same function and performance as the stock component, electronically controlling the vehicle's automatic shifting for far less than replacements at the dealer.
( 2 )
$282.99
—
$482.99
BD Diesel ProTect 68 Trans Pressure Control kits deliver 150 percent of the torque-holding force to stock transmissions like no others can. The industry-leading exclusive custom valve body separator plate and gaskets substantially reduce cross leaks compared to stock and other applications, even with much higher line pressures. An Electronic Pressure Control module delivers up to 250 psi clutch-apply pressure at full throttle, providing 150 percent of the holding force to prevent clutch slippage. All of this without modifying the transmission pump or removing the transmission. These controllers dynamically adjust the hydraulic-apply pressures, based on turbo boost/engine load. No tuning is required. Installation takes 2 to 3 hours to complete without having to do a full transmission relearn—since no internal tolerances have changed. A "fresh" stock transmission will have the ability to handle up to 500 hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended. Order the kit tailored to your vehicle. Product features: * 56 percent more theoretical holding power * Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks * Heavy-duty accumulator plate to prevent blowout * Dynamically adjusts hydraulic-apply pressures based on turbo boost/engine load * Dynamic control ramps up the much larger sweep * Prevents clutch slippage * No full transmission relearn required; quick relearn suggested * Warranty on parts: 12-month/24,000 miles
Not Yet Reviewed
$424.95
Motorcraft transfer case control modules help you shift your good ol' 4WD in an instant. They give you the ability to use your vehicle's 2WD or 4WD with just the flick of a few buttons. It's useful technology that lets you harness the full potential of your vehicle.
( 1 )
$295.99
—
$346.99
aFe ShiftLogic modules greatly improve the transmission shift feel in your diesel rig. The modules modify the transmission line pressure, resulting in improved shift firmness and reduced transmission slippage. They also reduce fluid temperature and extend the life of your transmission. aFe ShiftLogic modules have three different settings to personalize your shift feel, and the adjustment can easily be done with a simple push of the module button. aFe ShiftLogic modules feature: * Plug-and-play installation; no cutting or splicing wires * Ideal for performance driving and towing applications * Works with stock or modified transmissions * Adjustable LED settings; no LED—Stock, orange LED—Stage 1, red LED—Stage 2
Not Yet Reviewed
$408.00
These Dorman remanufactured transfer case control modules are pre-programmed out of the box and install easily with plug-and-play wiring connectors. Factory transfer case control modules typically fail through corrosion under normal use; this results in the inability to shift in or out of 4WD mode. The modules are fully stress-tested for durability, so you can be sure that your 4WD won't get stuck in or out of gear next time.
( 19 )
$259.99
Dorman transmission electro-hydraulic control modules (TEHCM) combine the TCM, valve body solenoids, and pressure and temperature switches into one unit. They restore the ability to shift the vehicle in and out of gear without hesitation or rough shift. They're fully remanufactured and vehicle simulator-tested for durability and quality assurance. Vehicle VIN is required at time of order. Requires programming after installation.
( 11 )
$312.99
—
$502.99
MSD Atomic transmission control modules are designed to adjust the operating parameters of later model electronically controlled 4-speed automatic overdrive transmissions. They're simple to configure with the supplied hand-held monitor--no PC required. You now have access to adjust shift points, adjust torque converter clutch behavior, select different levels of shift firmness, select between auto-shift and manual shift mode, and activate dyno mode to deliver repeatable chassis dyno results. The included hand-held monitor connects to them and can be left in place as a dashboard to monitor the transmission in real time, or can be disconnected when the configuration is complete. Once installed, these modules need only a few basic parameters to complete the initial setup. First, select the type of transmission you are using--all supported transmission types are listed in the menu. Other required fields include the number of engine cylinders, rear-end gear ratio, and tire height. Once this has been completed, you can now start and drive the vehicle, while taking advantage of the advanced setup menu items to dial-in the transmission to your liking. You can feel the results in real-time as a passenger manipulates the parameters and monitors the real-time data. Data available for viewing includes engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, and commanded gear. Best of all, the MSD Atomic transmission control modules are available as completely stand-alone units or Brainwave-compatible for the Atomic EFI systems. A transmission controller harness is sold separately.
( 19 )
$349.95
If your clutch seems to be giving you the slip, Sachs Stock Replacement clutch kits are an affordable option for repair or replacement to help you restore your vehicle back to its proper operation. Sachs Stock Replacement clutch kit components are built to OEM specifications to offer the same fit, form, and function as the factory OE part for a safer, more comfortable drive. Choose the replacement clutch kit designed to fit your application needs.
( 6 )
$322.99
—
$341.99
Summit Bucks
ACDelco GM Genuine Parts automatic transmission valve bodies are GM-recommended replacements for your vehicle's original components. These valve bodies act as a hydraulic brain, directing hydraulic fluid to different channels within the valve body in order to perform your vehicle's gear changes. The original equipment valve bodies are manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$497.99
Advance Adapters 6-bolt to 4-bolt tailshaft adapters are designed for 1996 and newer electronically controlled GM 4L60E transmissions with a hex bolt pattern on the output side of the transmission. They provide a 700R-style pattern for easy fitment of other adapters produced by Advance Adapters, and are 1.500 in. long. The heart of these systems lie in the new clamp-on reluctor ring and sensor which sends a 40 pulse per output revolution signal to the drivetrain control module. These adapters are manufactured from 356 T-6 heat-treated aluminum alloy and also include a GM VSS sensor, fastening hardware, and instructions. Make adding adapters and/or a transfer case easier with Advance Adapters 6-bolt to 4-bolt tailshaft adapters.
( 13 )
$303.48
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
HalTech Nexus Ti4L transmission interface kits allow easy control of GM's popular 4L series of automatic transmissions. Designed as an add-on transmission controller expansion module for the NEXUS ECU and VCU range, the Ti4L will be programmed via the HalTech NSP software, or Rebel LS users will be able to follow the simple setup wizard in the Haltech Connect app. Easy set-up is not the only feature! They have also developed smart long-term learning strategies via closed-loop line pressure control, which means shifting gets better the more you drive. Features include: * Plug-and-play with Nexus Rebel LS terminated harnesses * Easy setup wizard for Rebel LS ECU * Programming and setup via NSP Software or Haltech Connect app * Long-term learning strategies via closed-loop line pressure control * Haltech 500 psi pressure sensor included Compatibilty: * Haltech Nexus Series ECUs and VCUs, including Rebel LS * GM 4L60E * GM 4L65E * GM 4L70E (non-4x4 2006-08 only) * GM 4L80E * GM 4L85E nNon 4x4 1994 and newer only) Note: Does not support Haltech Elite/Platinum/Legacy ECUs
Not Yet Reviewed
$457.99
TCI Pro Super transmission overhaul kits contain the same parts and pieces used in building TCI Streetfighters. You will receive components normally replaced on a transmission rebuild, along with new performance frictions and steels, plus a Trans-Scat valve body kit, which enables you to change the valve body to a manual/automatic setup that delivers both a good solid shift suitable for towing applications and a competition-quality shift for drag racing. Features: * Seals, gaskets, and bushings * High performance frictions and steels * Reusable-type pan gasket * Adjustable modulator * High-volume filter * Drain plug kit * Trans-Scat valve body kit * Performance band included in 700R4, 4L60E, and 2004R kits as they normally require a band during regular repair cycles
( 87 )
$304.95
—
$484.95
ATP automatic transmission master repair kits enable you to conveniently rebuild and restore performance. They include everything needed to give your transmission new service life—including clutch plates, gaskets, seals, O-rings, and (depending on your application) they may include an oil filter, bushings, or even a vacuum modulator. If you have transmission work to perform, let the pros at ATP furnish the master repair kit designed for your model.
( 43 )
$251.99
—
$390.99
ACT Maxx Xtreme pressure plates provide longer clutch life through ACT's exclusive diaphragm design. They offer a smooth, precise feel with easy modulation and quiet, trouble-free operation using strong drive straps. You'll experience less vibration (even at high rpm) due to their dynamic balancing. More features of ACT Maxx Xtreme pressure plates include: * Clamps load increase of 70 to 150 percent * Pedal feel will be stiff to very stiff * SFI-certified to ensure safety * Recommended disc: Race
( 1 )
$306.99
—
$537.00
Rekluse offers clutch manual slave cylinders for a variety of applications, including many street and off-road bikes from KTM, Husaberg, Husqvarna, Gas Gas, Beta, Kawasaki, Harley-Davidson©, Honda©, and Sherco. These billet aluminum slave cylinders are direct bolt-on replacement products designed to improve the hydraulic system's durability and increase the rider's connection to the engine. Developed in partnership with Rockstar Energy Husqvarna Factory riders, the units have been proven in the toughest riding environments at the highest levels of racing. Order the model recommended for your motorcycle. Additional details: * Hard anodized billet aluminum housing and piston provide reliable performance and a more connected feel * Race-proven, durable piston and seal design * Optimized return spring ensures lever consistency * Improved clutch modulation * Direct bolt-on OE replacement * Designed for use with OE or aftermarket manual clutch systems
Not Yet Reviewed
$319.00
Rekluse clutch baskets combine precision CNC-machining with innovative world-class engineering to safeguard your vital internal components and keep you on the track or trail a lot longer. They feature billet aluminum hard anodized construction. A clutch basket is the backbone of your clutch system. Rekluse clutch baskets deliver the stamina and strength your system needs. Benefits of Rekluse clutch baskets: * Enhanced clutch modulation * Extreme durability resists notching and extends clutch life * Exclusive replaceable cushions protect your transmission even under the most extreme conditions * Tightly controlled tolerances ensure smooth operation, less drag, and reduced clutch noise
Not Yet Reviewed
$299.00
—
$499.00
Clearance
Ace Racing Street King clutch kits provide a confidence-inspiring pedal feel that's easy to modulate—with the feedback you desire. Thanks to the curved finger diaphragm design and patent-pending fulcrum ring, Street King clutches deliver smooth engagement and long life for enjoyable driving performance. These street/strip kits are available for a wide variety of specific vehicle and engine applications. Additional details: * Organic or ceramic friction models available * Handles up to 1,000 lbs.-ft. of torque with proprietary ceramic * Handles up to 800 lbs.-ft. with HP organic material * Bolts directly to flat OE or aftermarket flywheel * No adapter ring required * 2 sprung hubs (both discs) * Easy installation What's in the box? * Clutch assembly * Alignment tool * Mounting bolts * Setup tool * Studs/shims (if applicable) * Dowel pins (if applicable) * Installation instructions
Not Yet Reviewed
$800.00
$399.50
BD Diesel Tap Shifters let you take "manual control" of your automatic transmission when you need to switch gears quickly. With the shift lever's up/down touch-button shifting, you can now determine how and when the transmission will grab another gear upon acceleration or downshift. This is especially useful when you're driving down a long grade or freeway off-ramp, to assist with slowing a heavy load. The new Tap Shifter system revolutionizes the way you control your truck. Order the model recommended for your vehicle application. Includes: * Gear shift lever * Underhood control module * Plug-in wiring harness
( 1 )
$472.95
—
$498.95
Rekluse Clutch Core Manual clutch kits are professional-grade units offering improved durability and reliability over stock components. Constructed from double hard anodized billet aluminum components, they are lighter, stronger, and will perform better than stock. Features and benefits include: * Reduced clutch fade * Consistent and improved lever modulation * Strategic engineering increases oil flow, decreases operating temperatures and extends clutch life * Installation does not require modification of stock parts * Includes proprietary anti-drag steel drive plates
Not Yet Reviewed
$499.00
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 1 )
$499.95
McLeod 400 Series clutch discs are built for the grassroots drag racer. They are found in many cars that run in sanctioning bodies with rules that will not allow for the use of fully adjustable clutches and sintered iron discs. The design is based on a 10 1/2 in. diameter, 4 paddle design with ceramic semi-metallic pads, a flat fin drive plate for quick shifting, and a sprung hub with all-steel springs. These discs allow you to drive to the track with enough modulation for the street and then beat on the clutch at the track for your best time. To dominate the competition, you need performance engineered driveline components like the McLeod 400 Series clutch discs designed for your specific application.
Not Yet Reviewed
$299.50
Summit Racing™ high performance automatic transmission rebuild kits feature the necessary parts to get your transmission working more efficiently than ever. Available for a variety of transmissions, the Summit Racing™ high performance automatic transmission rebuild kits are an excellent choice for increased durability and performance. Kits include: * Alto Red clutches * Kolene coated or Premium Steels * High performance band * High performance transmission filter * Bushing kit * Oil seals * Gaskets * Lip seals
( 60 )
$283.99
—
$371.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
