Availability
Showing In Stock Items. Show All 21 Items.
Derale Performance transmission pans can double your transmission's life by dropping its temperature 20 to 50 degrees. These pans hold additional fluid and have heat-conducting metal tubes on the bottom. A replacement gasket is included.
( 201 )
$255.98
—
$289.37
Chevrolet Performance automatic transmission installation kits are designed to install a modern transmission into your application. These kits help make installation a breeze. If you are converting or upgrading your ride, Chevrolet Performance automatic transmission installation kits are what you need.
Not Yet Reviewed
$471.59
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 99 )
$400.35
—
$594.83
Pacific Performance Engineering heavy-duty transmission pans do more than hold oil--they cool and protect! They have thick cast construction from high-grade aluminum alloy. Thanks to internal and/or external cooling fins and robust side ribs, PPE transmission pans are much stronger and they allow fluid to run much cooler. Lastly, they feature an insanely strong Neodymium magnet-equipped stainless steel drain plug that attracts and holds harmful metal particles floating in your oil. Really, your pan just holds the oil? It's time for a change--upgrade to cooler Pacific Performance Engineering heavy-duty transmission pans.
( 32 )
$260.99
—
$350.99
Ford Performance Parts axle girdles are a great way to strengthen the rear-end of your car. Made of lightweight aluminum, they incorporate load bolts that provide additional support for differential bearing caps. Because they reduce the amount of flex in your differential while under load, they significantly reduce bearing wear and chipped teeth on the ring and pinion. They provide increased ring and pinion gear life and are a definite must for all racing and high performance street cars. Additional information: * Available for a variety of applications, including some independent rear suspensions * Replaces OE rear cover * Covers with cooling fins and machined for differential cooler pickup and return fittings recommended for road racing or extended high-speed/high-temperature applications * Models equipped with differential coolers may require modifications * Check exterior clearance to chassis/suspension
( 77 )
$252.99
—
$301.99
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$256.95
—
$570.95
Increase the oil capacity in your transmission using ATS Diesel Performance automatic transmission pans. The additional fluid capacity is designed to help keep the transmission running cooler. Heat is the number-one enemy of a transmission, and the cooler it runs, the longer it lasts! The pans feature a finned design and magnetic drain plug and are tapped for a temperature probe. All ATS Diesel Performance automatic transmission pans are powdercoated black with a machined ATS logo and fins.
( 15 )
$309.99
—
$494.99
Banks Power's Ram-Air transmission pans use technology from their patented differential covers to extend fluid life by rejecting more heat than stock pans and many competitor pans. Additional capacity, a break-away Ram-Air scoop, and Banks FlowThru Fins aid in cooling, and cooler fluid means a longer-lasting transmission. Heat kills. That's why you need a Banks Power Ram-Air transmission pan for your diesel truck. Select the pan designed for your truck. Key features: * Engineered for the highest heat rejection, improved oil flow, and full oil drainage * FlowThru Fins efficiently transfer heat from the oil to the cover's exterior * More heat absorption surface area than stock * More cooling surface area than stock * Breakaway Ram-Air scoop design prevents pan damage * Allows full fluid drainage
( 1 )
$429.00
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$367.99
—
$545.99
BD Diesel differential covers are cast to cool. Specially engineered, the powdercoated aluminum covers are designed with internal and external cooling fins, plus an extra-capacity bottom sump. This strategy allows gears to pick up and deflect oil back onto the ring gear and into the pinion gear for cooler, longer life. BD Diesel differential covers are gasket-less, and each includes a reusable Viton® O-ring, stainless steel Allen head cap bolts, fill plug, and magnetic drain plug for a complete, easy, and "cool" installation.
( 8 )
$335.95
—
$369.95
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 26 )
$493.99
Tired of waiting for your ring and pinions to break-in before towing or hitting the trail? Trail-Gear Trail-Creeper Super Finish ring and pinion gears require absolutely no break-in time. You can install these gears and get right into the action without the worry about premature ring and pinion failure. Select the ring and pinion set in the size and gear ratio needed. Features and benefits: * Made from tool-grade 8620 steel * Heat-treated for maximum strength and wear resistance * Gear teeth are cut using Gleason CNC hobbing machines and cutters * No break-in period * Less friction * Reduced wear allowing bearings and gears to last longer * Treated with REM Isotropic Super Finishing (ISF) process * REM Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra, meaning there is less friction between the gears, reducing wear by 95 percent and allowing the gears and bearings to run cooler and last longer * Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements
Not Yet Reviewed
$349.00
—
$409.00
DRP Performance offers premium low drag bearing kits for a wide range of applications, including many Ford, Chevy, and Pontiac cars from the 1960s, '70s, '80s, and '90s. Low drag hub components reduce friction and lower temperatures, making your wheels spin easier, delivering more horsepower to the track—all while reducing maintenance and making your race car faster. Enhance your performance on oval track asphalt, oval track dirt, drag racing, road racing, and street applications. Kits include a DPR bearing spacer, DRP Premium Super finished Bearing Kit, and DRP Ultra low drag seal. Here are details on each component: * DRP Bearing Spacer: A difference you can feel—in the pits and on the track. Bearing spacers make the most difference of any low drag hub upgrade. Properly installed, these spacers will provide an immediate increase in hub free spin, an improvement large enough to feel just by pushing the car around. And the benefit doesn't stop there. Bearing spacers make the most difference when a side load (cornering force) is applied. Drivers have commented on how much faster a car with bearing spacers free rolls when entering and through the center of the corner. Bearing spacers simplify and reduce hub maintenance. Spindle nut torque is no longer sensitive. In fact, with spacers installed, you can tighten the spindle nut as much as you want without overtightening the bearings. (DPR recommends 20-40 lbs.-ft.) Bearings will run cooler and do not need to be repacked as often. Bearing spacers are simple to install. DRP bearing spacers have a threaded adjustment, allowing the user to quickly set bearing end play or preload. A set-screw locks the spacer at the desired adjustment. Once installed, they do not need to be readjusted unless you replace the hub or bearings. Bearing spacers are used in virtually every application in professional motorsports. * DRP Premium Super finished Bearing Kit: Reduce bearing temperature by over 100 degrees F verses stock bearings! Increase free spin by over 250 percent! DPR starts with premium quality bearings and puts them through a super finishing process. This process removes the grind marks and greatly smooths the surface of the bearing roller, while leaving a "hatch" pattern to retain grease. Quality wheel bearings will last the life of most racing applications. * DRP Ultra Low Drag Seal: …billet aluminum, full PTFE sealing lip, reusable, great for any application: dirt, asphalt, road race, street Decrease seal drag by over 1,000 percent! Air gap seals create an "air curtain" to keep debris out and eliminate drag completely! DRP Ultra Low Drag hub seals are true, purpose-built, high performance seals. The housing is made from lightweight aluminum. The sealing element is a special PTFE blend, giving it natural low friction qualities. Seals are reusable. Order the kit recommended for your vehicle.
Not Yet Reviewed
$258.15
Rekluse TorqDrive clutch kits unlock the full power of your motorcycle engine. These top-of-the-line clutches are precision engineered from high-quality billet aluminum, and they're taking the world of elite racing by storm. The clutches are stronger, lighter, longer-lasting, and function at cooler operating temperatures—making TorqDrive clutch kits not just good, but Evolutionary! The features and benefits of Rekluse Clutch TorqDrive clutches: * Plus 6 friction disks offer up to 50 percent stronger clutch engagement with no increase in lever effort * Smoother shifting * Improved clutch lever feel * Engineered to eliminate slip—and tunable to handle high-horsepower engines * Steel core friction discs for improved heat dissipation and longer clutch life * Rekluse sleeves eliminate basket wear and notching
Not Yet Reviewed
$309.00
—
$509.00
ATI Super Pump front pumps are CNC-machined from billet aluminum or permanent-mold aluminum castings for precision and durability. Re-engineered lubrication circuits allow for increased flow volume in all critical areas. ATI increased the thickness of the pumps to improve oil pressure and volume at low rpm, resulting in a cooler-running transmission and converter. Features: * Superior pressure * Improved trans-brake hold * Prevents stator tube spinout
( 4 )
$331.99
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$517.95
—
$529.95
Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. They're offered in four levels to perfect your performance needs and designed to handle as much as 500 hp. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified vehicles, the Stalker Series torque converters offer performance that is tough and reliable. Over a hundred models are available; order the converter recommended for your transmission application.
( 135 )
$567.56
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
