Availability
Showing In Stock Items. Show All 35 Items.
Classic Performance slip shaft drivelines deliver the ultimate in performance. Featuring steel construction, these U-joint style driveshafts are self-adjusting, 33.75 in. collapsed to 36.5 in. expanded. This minimizes wear and tear on the carrier bearing and the rear-end on vehicles where the ride height has been altered. They're recommended for a variety of Chevy cars and trucks from the 1950s, '60s, and '70s.
( 13 )
$258.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
—
$491.99
On Sale
Stock driveshafts get power to the axles, but they aren't designed for tough off-road use. Yukon Gear & Axle performance driveshafts feature stronger tubing to help prevent bending or wear that could cause the shafts to become unbalanced. They include heavy-duty hardware, transfer case yokes, and either 1310 or 1350 U-joints. For better off-road protection, upgrade to Yukon Gear & Axle performance driveshafts, available in many sizes and options for applications from 2007 and up.
( 1 )
$572.99
$487.04
Bulletproof--ATI racing transmission slip yokes should be on your list of components to handle power-adders. ATI offers billet and forged options for Powerglide (including SuperGlide), T350, and T400 transmissions. They are made to accommodate Spicer 1350 Series U-joints. ATI racing transmission slip yokes are also offered for use with the PG roller bearing tailhousings and the forged yokes are available with quick-release caps.
( 6 )
$321.99
Summit Bucks
Sonnax flanged yokes will complete your driveshaft connection. These high performance 6061-T6 aluminum parts are precision-machined to be stronger than the original cast steel yokes, as well as being lighter in weight. Sonnax builds these yokes for exceptional balance and superior craftsmanship, for a show-quality driveline.
( 23 )
$262.46
—
$282.02
Summit Bucks
Sonnax adapter flange yokes are an ideal upgrade for modified performance vehicles, allowing an easy conversion from a 2-piece driveline to a one-piece, U-joint-style driveline. The yokes will dramatically increase strength and durability while reducing future maintenance costs. Benefits: * Machined 6061 T-6 aluminum construction * Eliminates the troublesome giubo and/or CV joint(s) * Great for drivetrain swaps and retrofits in custom applications, such as street rods and hot rods
Not Yet Reviewed
$287.66
—
$311.37
On Sale
Yukon Gear & Axle differential pinion yokes offer precise fit and strength for many applications. The yokes are manufactured from cast steel, forged steel, billet steel, and aluminum—and are available for fitment on dozens of specific axle applications. Choose the high performance strength of Yukon Gear & Axle differential pinion yokes for your build.
( 85 )
$296.99
—
$601.99
$252.44
—
$511.69
No matter how tough driveline parts are, there's a good chance they'll eventually need replaced. When age, rough terrain, or too much right foot comes to bear, you'll need Spicer Drivetrain Products external spline yoke shafts. These shafts are designed for long-lasting performance and are built to exacting tolerances. They're direct replacements for OEM parts with many upgrades available. For drivetrain components you can trust, use Spicer external spline yoke shafts.
( 2 )
$251.99
—
$429.99
Cardone remanufactured driveshafts are 100 percent dynamically balanced at 3200 rpm for vibration-free operation and increased joint life. They're engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Shafts are measured and straightened, slip yokes are lubricated, and new universal joints are installed to ensure optimum performance and durability. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. OE fit, form, and function come together with economical pricing in Cardone remanufactured driveshafts. Order the model recommended for your vehicle.
( 30 )
$284.50
—
$457.99
Whether you're an amateur racer or a passionate motorsport enthusiast, PEM Racing's circle track driveshafts are built to take your racing game to the next level! They're manufactured from quality materials and are available in various lengths and diameters. Replace your weak driveshaft with the strength to perform and enjoy professional-grade performance without breaking the bank with one of these circle track driveshafts from PEM Racing. Select the driveshaft designed for your application needs.
Not Yet Reviewed
$278.99
—
$332.99
D.I.D Racing Chain ZVM-X Series Super Street X-Ring chains deliver superbike strength, the longest wear life, and a quicker response. The ZVM-X chains have greater strength than the VX Series and are designed for heavyweight motorcycles with tremendous torque and horsepower. Their Direct Energy Transfer, born from D.I.D's experience in MotoGP, provides greater stretch resistance under load, while the twisting action of the X-Ring increases the sealing performance and the four contact points minimize power loss. Ride smoother with confidence when your motorcycle is equipped with a D.I.D ZVM-X Series Super Street X-Ring chain. They are offered in a vast selection of sizes, lengths, and chain colors. Choose the one right for your bike.
( 2 )
$252.99
—
$370.99
Summit Bucks
Sonnax splined stub and sleeve kits make it easy to build, balance, and service a rugged performance driveshaft. These high performance, heavy-duty kits have unique features to dramatically raise the torque capacity of the driveshaft while guaranteeing hassle-free assembly. Every yoke/stub shaft and splined sleeve is carefully machined from 6061 T-6 aluminum and matched during manufacturing to deliver the most precise and uniform spline fit available. Sonnax also uses more spline teeth than other aftermarket slip and stubs. You can overcome many driveshaft problems by converting from a 2-piece shaft to a one-piece aluminum build outfitted with a Sonnax slip and stub. From eliminating critical failure points to adding great flexibility in customization, they offer the best way to reliably drive horsepower from the engine and transmission to the differential in today's performance vehicles. Kits may also contain boot and boot clamps. For a strong, lightweight and durable driveline ideal for upgrading muscle cars and adapting powertrains to custom street/strip vehicles, select the Sonnax splined stub and sleeve kit designed for the U-joint and tube diameter ideal for your vehicle.
Not Yet Reviewed
$520.53
Motive Gear offers a replacement driveshaft yokes for thousands of applications. As an integral part of the differential transmission system, they help transfer power from the driveshaft to the pinion. The yokes are available in different materials and for a variety of positions and case designs. All Motive Gear products undergo rigid quality control processes to ensure proper fit, performance, and longevity.
( 22 )
$259.99
—
$371.99
On Sale
When you don't need a Super Joint, Yukon Gear & Axle also offers other U-joints—including standard, adapter, and lifetime models. But, even though they're not "super," all Yukon universal joints are tough enough to keep your shafts connected and spinning with awesome performance. Order the model designed for your application.
( 23 )
$376.99
$320.44
Sierra Marine offers a wide range of watercraft drive unit replacement parts, including U-joint assemblies for various GLM, Mallory, OMC, Volvo Penta, and Mercruiser stern drive applications. Each component is manufactured with factory materials in accordance with OE specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$308.50
—
$401.99
Motive Gear Ten Factory yokes feature precision forging for quality, strength, and performance. They offer a variety of designs for different U-joint series (including 1310 and 1350) and spline counts. When you want performance axle components that you can trust, order the Motive Gear Ten Factory yokes best suited to your application.
Not Yet Reviewed
$258.99
—
$259.99
Spicer Drivetrain Products offers the most advanced driveshaft technology, delivering peak performance for your vehicle. From stub shafts and carrier bearings, to support washers and more, Spicer essential driveshaft components can help maintain light and commercial vehicles, off-highway, military, industrial, and performance applications. Order the replacement parts recommended for your vehicle.
( 11 )
$258.99
—
$354.99
On Sale
Mate your yoke with Yukon Gear & Axle companion flanges. These round steel replacements are available in different spline counts to fit a choice of applications. For general replacement or performance, Yukon companion flanges are ready to move your project forward.
Not Yet Reviewed
$328.99
$279.64
BikeMaster BMZR series chains are built for your high performance sport machines! Specially developed for 1,000cc to 1,400cc machines, BikeMaster Z-ring chains feature high-tensile steels and larger pins offering longer life and more strength. The material receives specially controlled heat treatment to make it tougher and more durable, while the round rivet head ensures the best performance to meet today's high performance sport machines. Get moving with the affordable quality and performance of BikeMaster BMZR series chains.
Not Yet Reviewed
$262.86
Even smaller bikes deserve high performance. D.I.D Racing Chain 415ERZ non-O-ring racing chains are built for road racing—specifically for Moto3 regulations. They offer weight-savings for your track bike and deliver big performance for small bikes, accommodating bikes with up to 250cc of power. Features: * Solid bush * High rigidity * Gold
Not Yet Reviewed
$435.99
D.I.D Racing Chain VX Series Pro Street X-Ring chains showcase the industry-leading, patented X-Ring seal technology, which leads to extended chain life, minimal friction, and overall amazing performance. D.I.D offers multiple sizes and lengths that will fit numerous street and off-road motorcycles from 350cc to 1,100cc. The VX Series has increased rigidity to help reduce pin flex for a smooth ride. They are available in Gold/black and natural colors.
( 2 )
$255.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
