Transmission & Drivetrain - pressure KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Mantic Clutch USA 9000 Series Twin Disc Clutch Kits

Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability

5.0 out of 5 stars ( 2 )

$2,481.00

—

$2,874.00

South Bend Clutch Super Street Dual Disc Clutch Kits

South Bend Clutch Super Street dual disc clutch kits are offered for a range of applications and setups. These clutch kits are made using high performance materials and include everything you need for your clutch installation. When it comes to street performance, you can count on South Bend for top-quality components.

4.0 out of 5 stars ( 1 )

$2,088.97

—

$2,668.08

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$2,083.40

—

$3,841.26

South Bend Clutch Stage 3 Daily Driver Clutch Kits

South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.

Not Yet Reviewed

$2,010.64

—

$3,841.26

On Sale

Manufacturer Rebate

RAM Concept 10.5 Dual-Disc Metallic Complete Clutch Kits

RAM Clutches has simplified clutch selection by offering RAM Concept 10.5 Dual-Disc Metallic Complete Clutch Kits that include everything that you need for a seamless installation. Each complete clutch kit includes a RAM Concept 10.5 clutch kit, RAM billet steel flywheel, RAM slave cylinder, and flywheel bolts. The Concept 10.5 dual disc metallic clutch kits are the logical choice when superb drivability and maximum holding power are needed. Key features of the Concept 10.5 include an increased clamp load pressure plate and larger diameter 10.5-inch premium-faced metallic clutch discs. The pressure plate provides a silky-smooth clutch pedal feel, while the larger 10.5-inch discs provide maximum holding capacity when compared to the OEM clutch or other aftermarket kits. The Concept 10.5 unit also utilizes a sprung hub top disc that helps dampen and quiet the initial clutch engagement. A strap driven floater plate design ensures quiet operation. An outstanding driving experience is what you can expect when you choose a RAM Concept 10.5 Dual-Disc Metallic Complete Clutch Kit. When only the best will do, choose RAM!

Not Yet Reviewed

$2,225.00

—

$2,445.00

$2,002.50

—

$2,200.50

South Bend Clutch Stage 2 Endurance Clutch Kits

South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings

3.0 out of 5 stars ( 3 )

$2,000.35

—

$3,549.92

XClutch Stage 1 Clutch Kits

XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.

3.6 out of 5 stars ( 5 )

$2,041.43

—

$2,926.30

XClutch Motorsports Clutch Kits

XClutch Motorsports clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Select the kit for your application needs. XClutch 7.25 in. motorsport range is designed to provide a lightweight, high torque capacity solution for race vehicles such as used in time attack racing. The kits are available in single disc, twin disc, triple disc, and quad plate with a ceramic friction material, and are popular in high horsepower vehicles that use sequential gearboxes, and the lightweight design improves engine response. XClutch 7.25 in. race clutch range is ideal for drivers wanting a strong, high performance race clutch without having to compromise on quality. These kits are designed for high revving circuit or time attack applications and offer quick shift times and a lightweight construction. XClutch 8 in. range is designed to suit a wide range of vehicles commonly used in motorsport applications. As the clutch of choice for many club level racers and drifters around the world, these kits offer a great balance between torque holding capability, and heat capacity. These kits are available in both single and twin disc configurations. XClutch 9 in. range are one of their most adaptable kits for performance upgrades and conversions. They are available in organic, ceramic and carbon and offer exceptional torque capacity for high powered vehicles. The twin disc organic range is ideal for high horsepower street use, whilst the ceramic and carbon options are focused on track use where a higher heat capacity is often required.

Not Yet Reviewed

$2,000.65

—

$3,304.09

South Bend Clutch Stage 3 Drag Race Clutch Kits

South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$2,211.69

—

$3,841.26

South Bend Clutch Stage 1 Heavy-Duty Clutch Kits

Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.

4.82 out of 5 stars ( 17 )

$2,146.99

—

$3,294.61

South Bend Clutch Stage 2 Drag Race Clutch Kits

South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$2,029.18

—

$3,613.75

South Bend Clutch Dyna Max Feramic Clutch Kits

South Bend Clutch Dyna Max feramic clutch kits are manufactured with full feramic lining on a marcelled fin. The kits offer modified pressure plates for a higher plate load and smooth clutch engagement. South Bend Clutch Dyna Max feramic clutch kits help you to resolve premature disk failure from high horsepower or heavy hauling and they're available with or without a flywheel.

Not Yet Reviewed

$2,321.08

South Bend Clutch Dyna Max Ceramic Clutch Kits

South Bend Clutch Dyna Max ceramic clutch kits engage your rig with ceramic buttons on each side of the clutch disc. The kits include flywheels and offer modified pressure plates for a higher plate load and smooth clutch engagement. South Bend Clutch Dyna Max ceramic clutch kits fit several high performance diesel rig applications.

5.0 out of 5 stars ( 3 )

$2,553.18

South Bend Clutch Stage 4 X-Series Clutch Kits

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$2,211.69

—

$3,841.26

South Bend Clutch Stage 2 Daily Driver Clutch Kits

South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.

3.17 out of 5 stars ( 6 )

$2,088.97

—

$3,422.27

South Bend Clutch Competition Dual Disc Clutch Kits

South Bend Clutch competition dual disc clutch kits offer SFI-approved high performance for your rig! It's important to choose the right clutch, and for drag racing or extreme sled pulling, South Bend Clutch has kits to move you across the finish line. These quality-built, heavy-duty kits are available in two different plate loads--GM kits have feramic buttons, and Dodge kits are available with or without an input shaft upgrade. South Bend Clutch competition dual disc clutch kits increase your pedal pressure to handle the higher power that makes you a winner.

3.0 out of 5 stars ( 2 )

$2,321.08

—

$2,668.08

TCI StreetFighter Automatic Transmission Packages

TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.

3.65 out of 5 stars ( 17 )

$2,700.95

—

$4,950.95

Sonnax Smart-Tech Drum Modules

Sonnax Smart-Tech drum modules for racing GM TH400 transmissions improve on-track performance and consistency, leading to quicker ETs, more wins, and greater reliability. The TH400 is preferred for its overall durability and multitude of available ratios, but is known to be heavier and less efficient than the popular two-speed Powerglide. Part of the TH400 inefficiency results from the fact that the direct drum counter-rotates, spinning backwards in 1st gear, brakes to a complete stop on the 1-2 shift, then goes from 0 RPM to input RPM on the 2-3 shift. Significant energy is wasted through this cycle that robs power, upsets traction on the shifts, and contributes to broken internal parts. Compared to aluminum direct drums, the Smart-Tech drum module reduces the weight of the counter-rotating components by over 3.3 lbs.! And more significantly, because the weight of the Sonnax counter-rotating parts is closer to the centerline, there's a 68 percent reduction in energy required to stop and restart during the 1-2 and 2-3 shifts. The benefits are increased wheel horsepower, better acceleration, less shock on the shifts, and improved durability. * Complete kit (34555-01K) replaces both forward and direct drums and includes everything from intermediate sprag to the pump; a selection of Sonnax input shafts is available separately. * 100 percent new content, no used core pieces * Includes larger-diameter, 36-element sprag and sprag race that works with OE intermediate clutches * Includes six-friction forward clutch pack and seven-friction direct clutch pack Contents: * Forward Piston Housing * Forward Piston * Forward Piston Return Springs (16) * Forward Spring Retainer * Forward Snap Ring * O-Ring 1.674 in. * Lip Seals (2) * Direct Housing Assembly * Direct Piston * Direct Piston Return Springs (26) * Direct Spring Retainer * Direct Snap Ring * O-Ring 2.737 in. * Sprag Shaft * Front Sprag Retainer Plate * Heavy-Duty Sprag 36 Element * Outer Sprag Race * Rear Sprag Retainer Plate * Sprag Retainer Screws (4) 6-32 x 5/16 in. * Quad Ring Seals (2) * Anti-rotation Seal Rings (2) * Drum * Pressure Plate * Outer Snap Rings (4) * Bearing Small * Forward Clutch Hub * Bearing Large * Direct Clutch Hub * Steel Clutch Plates (4) .060 in. * Steel Clutch Plates (11) .077 in. * Friction Clutch Plates (13) .080 in. * Clutch Separators (60) .103 in.

Not Yet Reviewed

$3,052.40

Reid Racing Super Hydra 400 Transmission Cases

Redesigned and strengthened, Reid Racing Super Hydra 400 transmission cases address weaknesses and add features that improve every aspect of the Turbo 400. They build their Super Hydra 400 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission! A direct replacement for the GM case, Reid cases use an incredibly expensive permanent mold casting technique to increase the case wall thickness, making it sufficient to pass SFI 4.1 certifications without the need for any external shields or internal liners. Super Hydra 400s are massively tough, ductile, and leak-free—with the strength to handle rock crawling, as well as desert or short-course truck racing. Their modular, 2-piece design allows them to be used with all popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super Hydra 400 transmission cases are offered in drag/street and off-road versions, each with features geared specifically for those applications. Features: * Speedometer and governor provisions * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Additional dipstick hole on driver side * Multiple external pressure taps allow for monitoring of circuit pressures * Accept all style oil pumps, including 8-bolt and vari-pitch designs * Heli-coiled bellhousing and oil pump threads * Pre-machined to fit larger custom planetary gear carriers Off-road also includes: * Pre-machined side oil feed feature for 4L80-E center support * Front band anchor tapped for custom ARP anchor bolt (supplied) * Pre-machined bosses for input and output speed sensors * Un-machined speedometer boss for maximized 4x4 transfer case load support * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters * Available with a 4L80-E size pressure plate

5.0 out of 5 stars ( 4 )

$2,149.00

—

$2,283.00

GearStar GM 4L65E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan

Not Yet Reviewed

$4,945.00

TCI Street Rodder Transmission Packages

Perfect for a mild daily driver or street rod, these TCI Street Rodder transmission packages give you all of the components necessary to install a new transmission. Using the highest quality TCI manufactured components, each Street Rodder package is equipped with an automatic valve body and valve body performance improvement kit that allows you to achieve firmer, yet not too harsh shifts in the vehicle while remaining fully automatic and retaining the stock shift pattern. Each Street Rodder transmission and torque converter undergo the industry-recognized triple testing to verify that internal fluid pressures and shift characteristics match the strict TCI quality control standards. Torque converters are tested to maintain that the impeller body and pump drive hub remain true and are then pressurized and lead tested to confirm the integrity of the weld seams. Finally, each unit is computer balanced to reduce drivetrain vibrations that can cause serious damage to your converter. For street cruisers who want excellent street performance and lasting durability, the TCI Street Rodder transmission packages provide the prefect solution.

1.0 out of 5 stars ( 1 )

$4,612.95

GearStar GM 4L60E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L60E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Raybestos Stage 1 frictions and steels * TransGo heavy-duty reprogramming kit with Shift Command * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 10-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * High-energy wide bands * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (chrome) * Transmission mount * New OE steel transmission pan

Not Yet Reviewed

$4,945.00

TCI Competition Transmissions

TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!

3.55 out of 5 stars ( 31 )

$2,024.95

—

$3,830.95

Reid Racing Super 80 Transmission Cases

Redesigned and strengthened, Reid Racing Super 80 transmission cases address weaknesses and add features that improve every aspect of the 4L80e. They build the Super 80 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission. Reid Super 80 cases are massively tough, ductile, and leak-free with the strength to handle turbocharged muscle cars, drag cars, rock crawling, and desert truck racing. Their modular, 2-piece design allows them to be used with popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super 80 transmission cases are SFI 4.1 certified without requiring any external shields. Features: * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Multiple external pressure taps allow for monitoring of circuit pressures * Heli-coiled bellhousing and oil pump threads * Front band anchor tapped for custom ARP anchor bolt (supplied) * Input and output speed sensors--bosses are dual machined to accept freeze plugs * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters

5.0 out of 5 stars ( 2 )

$2,318.00

42 Results Found For "pressure"