Availability
These Strange 12-bolt F-body rear-end assemblies are designed to replace the entire rear-end in your F-body Camaro or Firebird. They feature the following components: * Strange designed 12-bolt case with torque arm provision * Premium nodular iron casting * Choice of differential carrier * 33 or 35 spline Pro Race Axles * Pro gear set * Choice of gear ratio * Fully welded axle tubes * S-series yoke with u-joint * Accepts 1993-97 or 1998-2002 disc or drum brakes (sold separately) * Chrome rear-end cover
Not Yet Reviewed
$3,033.99
—
$3,424.99
Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$4,494.00
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$2,594.99
—
$3,371.99
Detroit Speed can provide you with new GM 12-bolt axle housings with QUADRALink brackets. Available in two finishes, select the one you prefer. Detroit Speed housing features and benefits: * Heavy-duty narrowed housing * TIG-welded 3 in. tubes with .218 wall thickness * Billet Torino ends * Fill and drain plugs included * Axle vent * Available in bare finish or satin black powdercoat * QUADRALink brackets are TIG welded * Accepts 2.5 in. offset rear brake packages from AP, Baer, or Wilwood
Not Yet Reviewed
$2,099.95
—
$2,362.95
Strange 12-bolt bolt-in rear-ends with heavy-duty posi and leaf spring mounts are custom-made to your specifications. Details: * Factory or custom widths available * Choice of housing ends and leaf spring mounts * Professionally welded and assembled * Crated to protect your investment Information required: * Factory bolt-in * Year, make, and model of vehicle * Factory / Custom width (specify) * Mounts: Single leaf / Multi leaf / Other (specify) * Type of brakes: OEM Drum / Aftermarket * If aftermarket, specify manufacturer and part number * Bolt circle and stud choice * Gear ratio Assembly includes: * 12-bolt housing with leaf spring mounts installed * 30-spline alloy axle package * 4 1/2 in., 4 3/4 in., or 5 in.″ bolt circle * Choice of press-in or screw-in stud kit * Standard gear set * Eaton HD clutch style posi * Choice of gear ratio * S-Series pinion yoke * Pinion yoke U-bolt kit * Chrome steel cover * Bottle of friction modifier (clutch units only) * Fully crated
Not Yet Reviewed
$3,033.99
Winters heavy-duty quick-change 10 in. ring gear 12-bolt rear axle assemblies consist of an aluminum or magnesium center section with steel axle tubes, heavy-duty bells, and a 4.86:1 ring and pinion gear set. They're available with a variety of options that can increase strength and durability for maximum performance.
Not Yet Reviewed
$2,767.99
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 68 )
$2,153.99
—
$4,039.99
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,077.00
—
$2,730.00
An upgrade that gets you more mileage per gallon and hubs that are easier to service, Yukon Gear & Axle spin free locking hub conversion kits are an enhancement anyone would want on their 4WD vehicle. Whether you service your vehicle yourself or you have a trusted mechanic, you don't usually like to keep difficult or expensive-to-fix things on your ride. These kits are not only easier to service, they help reduce wear and tear on your drivetrain components. They allow your front axle and drivetrain to disengage when in 2WD, preventing premature wear and improving fuel economy. Yukon Gear & Axle kits are available for various makes and models from the 1980s and up. Features include: * Reduced drag, resulting in greater fuel economy * Replaces vulnerable and expensive factory unit bearing * Kit includes heavy-duty 4340 chrome-moly outer axles * Premium hubs allow driver selectability * Complete kits contain all necessary components
( 11 )
$2,557.99
—
$3,412.99
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$2,087.99
—
$2,966.99
Clearance
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$2,041.89
—
$2,720.99
PEM Racing MAX Option low drag quick-change rear-end assemblies are designed to minimize drag and allow for quick gear changes, particularly in racing and hot rodding applications. By incorporating features like REM (Rotating Element Method) finished gears and bearings, black thermal coating, and drilled aluminum spools, these PEM Racing MAX Option low drag quick-change rear-end assemblies aim to reduce friction, heat, and rotating mass. For convenience, quick-change rear-ends utilize spur gears that can be easily swapped out or reversed to change the final drive ratio, enabling quick adjustments for different track conditions or driving styles.
Not Yet Reviewed
$2,930.99
Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 20 )
$2,291.99
—
$4,266.99
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$2,159.00
High-horsepower and stock axles are fine if you're sitting in neutral and revving the engine, but foot-pounding acceleration requires Gforce Outlaw axle shafts. These direct bolt-in axles feature anti-wheel hop technology for smoother launches, powdercoating for corrosion resistance, and extremely strong CNC-machined one-piece outer and inner billet stubs. Their proprietary aerospace billet alloy shafts use large 31-spline axle bars and 31-spline severe-duty CV joints, enabling these IRS axles to support awe-inspiring performance! Outlaw CVs produce greater travel and operating angles than OE joints, helping to keep tires on the road instead of loitering in outer space. All axle assemblies are hand-built in the USA with premium materials. Order the model recommended for your application.
( 2 )
$2,099.00
—
$2,399.00
RCV Ultimate IFS CV axles for independent front suspension are designed to overcome the limitations of your axle shafts. They provide increased strength that original equipment axle shafts just can't match--even if you have big tires and big power, there are no worries. Ultimate IFS CV axles are low maintenance, and they meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness, and control of your IFS. Equip your vehicle with RCV race-proven materials and design, so you can "Put the power down with confidence!" Select the Ultimate IFS axle set designed for your vehicle.
( 1 )
$2,899.95
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$2,080.00
—
$2,489.00
Moser Engineering Chrysler 8.75 in. third member assemblies are designed to help you get your power to the ground. They are made of nodular iron and fit a 489 case. They include a 29-spline yoke and motive gears. Moser Engineering has you covered when it comes to all of your third member assemblies.
( 2 )
$2,180.00
—
$2,195.00
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$4,029.99
—
$5,548.99
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$2,202.99
—
$2,642.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,350.00
Tilton's Chevy clutch-flywheel assemblies are designed to be a direct replacement for the stock assemblies of both the C5 and C6 Corvette, as well as the Gen5 Camaro, retaining the same diameter (ring gear size) as originally equipped with the car. Metallic clutch-flywheel assemblies include a 7.25 in. 3-plate OT-Series metallic race clutch, disc pack, billet steel flywheel with integral ring gear, hydraulic release bearing assembly and related hardware. Order the model recommended for your vehicle.
Not Yet Reviewed
$2,465.00
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$2,361.80
—
$3,058.43
Tilton 52-Series UTGC driveline packages are engineered to not only save you time, but also deliver the performance to reach your car-building goals. Matched components work together efficiently and are designed to offer the most ground clearance—an additional 2.2 inches—over most OE bellhousings. And for fast acceleration and deceleration, the included flywheel and clutch combo offers the lowest inertia possible in a rear-mount starter unit. Tilton 52-Series UTGC driveline packages are designed to simplify your car-building process, as well as deliver maximum performance, reliability, and ease of installation. Tilton 52-Series UTGC driveline packages include: * Rigid aluminum bellhousing for maximum power and minimum wear * Clutch/flywheel assembly: race-proven OT-Series clutch and billet steel flywheel for balance, durability, and low inertia * Hydraulic release bearing: billet aluminum body and piston, proprietary low-friction coatings, high-temperature quad tensioner monoseal, and high-quality 38mm contact diameter bearing maximizes clutch modulation * Super Starter: rear mount severe-duty 3.0 hp starter
Not Yet Reviewed
$2,571.25
—
$3,400.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
