Transmission & Drivetrain - Systems KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

RideTech 1959-64 Chevy Air Suspension Systems

RideTech 1959-64 Chevy air suspension systems are designed specifically for the Chevy "B" Body cars. These kits provide an ultra-low show stance while maintaining excellent ride quality and handling. Choose the air suspension system recommended for your year/model. Some kits may vary depending on your application. RideTech 1959-64 Chevy air suspension system features and notes: * Upper StrongArms (powdercoated black and fully assembled with ball joints, bushing, and cross shafts; ready for installation) * Lower StrongArms (powdercoated black and fully assembled with ball joints, bushing, and cross shafts; ready for installation) * Front HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling (also allows fine-tuning of the ride quality and handling) * Front and rear MuscleBars help reduce body roll and create room for wider tires. PosiLink end links provide immediate engagement between the chassis and control arms. * Rear StrongArms provide added strength to help get the power to the pavement * Rear CoolRide and HQ Series shocks simply bolt in place of the stock springs. Important note: Control system is not included. To complete your air suspension system, a RideTech compressor system is recommended. * RideTech kit 11060298 upper arm and panhard bar utilize R-joint technology to provide smooth operation and reduce roll bind; must be used with stock spindles. Some cars have two rear upper control arms and will need an additional StrongArm. (1959-64 GM B-Body includes Impala, Bel Air, Biscayne, Brookwood, El Camino, Kingswood, Nomad, and Parkwood)

Not Yet Reviewed

$4,820.00

Chevrolet Performance SuperMatic Transmission Control Systems

Chevrolet Performance SuperMatic transmission control systems make it easy to connect and cruise. These controller kits complement the ready-to-run convenience of your crate engine with plug-and-play operation. There is no additional wiring, and the leads are clearly marked to link up with the engine control harness. SuperMatic control systems are pre-programmed to provide full-function transmission operation after completing the connections. No laptop programming is required. Chevrolet revised the systems with a more compact design for a headache-free installation with your carbureted small block, big block, or ram jet engine—and they're compatible with OBDII code readers. Get in gear with the simplicity and improved shift performance offered by Chevrolet Performance SuperMatic transmission control systems.

Not Yet Reviewed

$2,155.45

RideTech 1958 Chevrolet Air Suspension Systems

RideTech 1958 Chevrolet air suspension systems are specifically designed for the 1958 Chevy B-body cars (including the Impala, Del Ray, Bel Air, Biscayne, Brookwood, and Nomad). They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These kits contain front upper and lower StrongArms, front and rear MuscleBars, plus front and rear HQ Series coilovers. Enjoy the benefits of buying a complete system that takes all of the guesswork out of your suspension upgrade. Features, items, and specs: * Must be used with 1959-64 stock spindles and disc brakes * Black powdercoated upper StrongArms feature corrected ball joint angles, and are fully assembled with ball joints, bushing, and cross shafts * Upper ball joints moved back to allow for additional caster setting (improves high speed stability and steering feel) * Black powdercoated lower StrongArms feature a double sheer lower mount for increased strength, and are fully assembled with ball joints, bushing, and cross shafts * HQ Series shocks allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001-mile warranty (rebound knob located on top of shock for underhood access) * CoolTide system using Firestone air springs * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink endlinks that provide immediate engagement between chassis and control arms) * Rear MuscleBar * Rear StrongArms provide added strength to help get the power to the pavement (includes a tubular upper wishbone specific to the 1958 model year)

Not Yet Reviewed

$4,680.00

Tremec TKX Manual Transmissions

Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance

4.96 out of 5 stars ( 45 )

$2,999.99

TCI StreetFighter Automatic Transmission Packages

TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.

3.65 out of 5 stars ( 17 )

$2,700.95

—

$4,950.95

Ford Performance Parts Tremec 6-Speed Transmissions

These Ford Performance Parts Tremec 6-speed transmissions are designed to withstand the abuse of the street or strip. The hardened internals are built to withstand up to 700 ft.-lbs. of torque, while still giving you quick and precise shifts throughout the rev range. These T56 Magnum transmissions come equipped with multiple shifter mounting options and provisions for either an electronic or mechanical speedometer, making them very versatile. Whether you're building a drag car, hot rod, or just wanting to beef up your existing system, these Ford Performance Parts Tremec 6-speed transmissions are the answer you are looking for.

4.75 out of 5 stars ( 4 )

$3,899.99

RideTech Narrowed 4-Link Axle Assemblies

If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member

5.0 out of 5 stars ( 1 )

$2,175.00

—

$2,275.00

RideTech Stock Width 4-Link Axle Assemblies

If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member

Not Yet Reviewed

$2,175.00

—

$2,275.00

FTI Performance Mud Series Powerglide Level 5 Transmissions

Blowing a transmission is never good—and doing so in the middle of a mud pit can lead to many other issues. FTI Performance Mud Series Powerglide Level 5 transmissions are rated up to 1,500 hp and designed for extreme conditions. They start life with SFI-certified aftermarket cases, and then add all-new internal parts, a billet aluminum valve body, 8-clutch drum, and a straight-cut planetary. A deep aluminum pan allows for extra fluid and better cooling of the Mud Series units, while the non-creeping trans-brake keeps your vehicle in place. VASCO material input and 4340 output shafts are tough enough to keep the systems moving. FTI Mud Series Powerglide Level 5 transmissions are available in one- or two-gear models, standard or shorty length. Order the model recommended for your vehicle make and engine application.

5.0 out of 5 stars ( 1 )

$4,899.00

Tremec Magnum XL 6-Speed Transmissions

With all the most important content from the original Magnum, Tremec Magnum XL 6-speed transmissions retain brute strength and sophistication, but eliminate multiple shifter locations and dual speedo outputs. Each XL extended length tail section provides a rigid direct-mount shifter designed to eliminate the semi-remote shifter found in many popular late-model applications, delivering vastly improved performance and lightning quick shifts. Tremec Magnum XL transmissions not only offer shift performance and extended length, but they are also rated at 700 lb.-ft. of torque, support 7,800 rpm shifts, and are available in two gear ratio configurations. The Magnum XL was designed specifically to replace the OEM 5- or 6-speed transmission where performance improvements are desired. Simplifying the swap, they include an SFI-approved steel bellhousing, crossmember, trans mount, isolated shifter, and shift ball. They also reuse the OEM hydraulic clutch release system. Select the ideal gear ratio for your build. Features: * Extended- length (XL) extension housing * Shifter location that mimics several late-model applications * Reverse inhibitor solenoid * Electronic speedometer output * Fluid fill and drain ports * Common "T-56" style bolt pattern * Mounted pad for OEM-style hydraulic slave or aftermarket guide tube * Standard Magnum clutch fork exit window * Unique isolator-style shifter for reduced noise, vibration, and harshness (NVH) * Reverse light switch

Not Yet Reviewed

$3,695.00

QA1 Standard Width Ford 9 in. Rear Axle Housings

If you are already running one of QA1's 4-link suspension kits on your classic car, get ready to take your build to the next level with their custom 9 in. rear housings engineered to integrate seamlessly with your existing QA1 setup. Designed for enthusiasts looking to improve performance and durability, QA1 Standard OE width Ford 9 in. rear axle housings are perfect upgrades for handling more horsepower and aggressive driving conditions. They are designed to bolt seamlessly to your QA1 4-link system, with fully formed trailing arm brackets that minimize flex under heavy loads, enhancing strength and rigidity. Whether you're increasing horsepower or seeking a more durable rear-end solution, these custom QA1 9 in. rear housings deliver the performance gains you need. Select the kit designed for your vehicle. Features: * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets ensure your suspension remains rigid * Heavy-duty 3 in. O.D., 1/4 in. thick wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Standard 5 x 4 3/4 in. bolt pattern for a wide range of wheel options * Durable semi-gloss powdercoat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and jack pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability

Not Yet Reviewed

$2,099.95

The Driveshaft Shop Pro Level Axles

The Driveshaft Shop offers Pro Level axles for a variety of applications, including select Subaru and Nissan models from 2004 and up. These axle/hub kits are a complete rear system, including both axles, hubs, and ARP extended studs. The axles feature 28-spline 300M-grade axle bars, 108mm Porsche-type inner CV with billet bolt-on stub flanges for the R180 differential, and a billet outer CV housing using a 300M spline section to the wheel hub. The hubs are made to accommodate the larger spline and have multiple wheel bolt patterns (where applicable). Axles are machined to accept the factory ABS rings and are rated up to 1,200 hp.

Not Yet Reviewed

$2,273.86

—

$4,277.24

QA1 Narrowed Ford 9 in. Rear Axle Housings

If you are already running one of QA1's 4-link suspension kits on your classic car, get ready to take your build to the next level with their custom 9 in. rear housings engineered to integrate seamlessly with your existing QA1 setup. Designed for enthusiasts looking to improve performance and durability, QA1 Narrowed Ford 9 in. rear axle housings are perfect upgrades for handling more horsepower and aggressive driving conditions. They are designed to bolt seamlessly to your QA1 4-link system, with fully formed trailing arm brackets that minimize flex under heavy loads, enhancing strength and rigidity. Whether you're increasing horsepower or seeking a more durable rear-end solution, these custom QA1 9 in. rear housings deliver the performance gains you need. Select the kit designed for your vehicle. Features: * Narrowed 2 1/2 in. per side for use with mini tubs for wider wheel and tires * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets ensure your suspension remains rigid * Heavy-duty 3 in. O.D., 1/4 in. thick wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Standard 5 x 4 3/4 in. bolt pattern for a wide range of wheel options * Durable semi-gloss powdercoat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and jack pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability

Not Yet Reviewed

$2,099.95

Trail-Gear Rock Assault 9 Front Roller Kits

Get your rig ready to rock on! Trail-Gear Rock Assault 9 front roller kits are built with the strength to climb boulders and blaze trails at prices that are hard to beat. The rock-hard housings start with 1/4 in. formed shells, and then a 1/2 in. face plate is attached. DOM axle tubes are welded to the center section with the industry's first 3-point attachment system, giving the tubes superior support and engagement into the center section. These kits are available in a choice of tubing wall sizes. Start or upgrade your build with Trail-Gear Rock Assault 9 kits. Trail-Gear front roller kits come with: * Rock Assault 9 axle housing * Unit hubs (lug nuts included) * Rock Assault 9 knuckles * Rock Assault 9 inner C's * Rock Assault 9 steering arm set * Rock Assault 9 billet aluminum seal housing kit * Rock Assault 9 fully loaded brake kit

Not Yet Reviewed

$4,299.99

Centerforce TRIAD DS Clutch Kits

Centerforce TRIAD DS clutch kits have been developed for vehicles requiring a holding capacity of 500 to 1,100 lbs.-ft. of torque at the crank. These patented Drive System (DS) multi-disc clutches are smaller and lighter, offering many features and advantages for quick-revving vehicles, and include pressure plate, discs, floaters, flywheel, pilot bearing, bolts, and tool. The billet pressure plate features Centerforce's patented centrifugal weight system (where applicable) for superior clamp load over stock and their patented ball bearing actuated pressure plate (where applicable) provides light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar® full-facing friction material providing increased holding capacity. TRIAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker rpms. Centerforce TRIAD DS clutches are match balanced and ready for installation using the included ARP fasteners. Choose the kit designed for your vehicle.

Not Yet Reviewed

$2,288.95

Centerforce TRIAD XDS Clutch Kits

Centerforce TRIAD XDS clutch kits supply triple disc clutches developed for vehicles requiring a holding capacity of 500 to 1,200 ft.-lbs. of torque at the crank. For superior clamp load the billet pressure plates feature their patented centrifugal weight system (where applicable), while the patented ball bearing-actuated pressure plate (where applicable) provides light pedal effort. TRIAD XDS disc packs are equipped with metallic friction material for increased holding capacity and they are available in either sprung or solid hub styles, depending on application. The clutches are equipped with lightened billet steel flywheels providing low inertia, resulting in quicker rpms. Centerforce TRIAD XDS clutch kits may feature: * No complicated setup or adjustments * 8.75 in. diameter designed to lower inertia for heavy track use * Centrifugally assisted diaphragm to increase holding capacity with rpm * Solid hub design offers light weight and quick shifts * Patented multi-disc floating disc and drive disc designs * Holds 500 to 1,200 ft.-lbs. of torque at the flywheel * Patented ball bearing pressure plate * Specification card * Excellent driver control * Positive drive floater * Precision-balanced * ARP fasteners

Not Yet Reviewed

$2,309.95

TCI StreetFighter Transmissions

TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.

3.57 out of 5 stars ( 145 )

$2,575.95

—

$4,996.95

B&M Street and Strip Transmissions

B&M remanufactured Street and Strip transmissions are put together with new gaskets, bushings, seals, thrust washers, high performance friction materials, and gold zinc plated hardware. The front pump is rebuilt to B&M specs and the valve body is recalibrated. They're built for extreme conditions and are perfect replacing a worn transmission, cruising, and racing.

3.29 out of 5 stars ( 14 )

$4,150.95

American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits

American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness

5.0 out of 5 stars ( 1 )

$4,175.95

—

$4,395.00

XClutch Motorsports Clutch Kits

XClutch Motorsports clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Select the kit for your application needs. XClutch 7.25 in. motorsport range is designed to provide a lightweight, high torque capacity solution for race vehicles such as used in time attack racing. The kits are available in single disc, twin disc, triple disc, and quad plate with a ceramic friction material, and are popular in high horsepower vehicles that use sequential gearboxes, and the lightweight design improves engine response. XClutch 7.25 in. race clutch range is ideal for drivers wanting a strong, high performance race clutch without having to compromise on quality. These kits are designed for high revving circuit or time attack applications and offer quick shift times and a lightweight construction. XClutch 8 in. range is designed to suit a wide range of vehicles commonly used in motorsport applications. As the clutch of choice for many club level racers and drifters around the world, these kits offer a great balance between torque holding capability, and heat capacity. These kits are available in both single and twin disc configurations. XClutch 9 in. range are one of their most adaptable kits for performance upgrades and conversions. They are available in organic, ceramic and carbon and offer exceptional torque capacity for high powered vehicles. The twin disc organic range is ideal for high horsepower street use, whilst the ceramic and carbon options are focused on track use where a higher heat capacity is often required.

Not Yet Reviewed

$2,025.68

—

$3,304.09

XClutch Stage 2 Clutch Kits

XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.

Not Yet Reviewed

$2,517.25

XClutch Stage 1 Clutch Kits

XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.

3.6 out of 5 stars ( 5 )

$2,041.43

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$2,532.99

South Bend Clutch Stage 2 Drag Race Clutch Kits

South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$2,183.53

30 Results Found For "Systems"