Availability
Showing In Stock Items. Show All 51 Items.
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 4 )
$4,095.00
—
$4,495.00
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,014.00
—
$2,727.00
Holley transmission installation kits come complete with everything you need to bolt a T5 transmission to a 28- or 50-ounce externally balanced small block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5-pound, 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included
Not Yet Reviewed
$2,149.95
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$2,000.35
—
$3,549.92
XClutch Motorsports clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Select the kit for your application needs. XClutch 7.25 in. motorsport range is designed to provide a lightweight, high torque capacity solution for race vehicles such as used in time attack racing. The kits are available in single disc, twin disc, triple disc, and quad plate with a ceramic friction material, and are popular in high horsepower vehicles that use sequential gearboxes, and the lightweight design improves engine response. XClutch 7.25 in. race clutch range is ideal for drivers wanting a strong, high performance race clutch without having to compromise on quality. These kits are designed for high revving circuit or time attack applications and offer quick shift times and a lightweight construction. XClutch 8 in. range is designed to suit a wide range of vehicles commonly used in motorsport applications. As the clutch of choice for many club level racers and drifters around the world, these kits offer a great balance between torque holding capability, and heat capacity. These kits are available in both single and twin disc configurations. XClutch 9 in. range are one of their most adaptable kits for performance upgrades and conversions. They are available in organic, ceramic and carbon and offer exceptional torque capacity for high powered vehicles. The twin disc organic range is ideal for high horsepower street use, whilst the ceramic and carbon options are focused on track use where a higher heat capacity is often required.
Not Yet Reviewed
$2,000.65
—
$3,825.17
Quarter Master Optimum-RR Series clutch kits offer the latest in purebred race-clutch technology designed to fulfill the wishes of every modern Camaro, Corvette, or Mustang road racer. They feature either a NASCAR-derived 7.25 in. 2- or 3-disc clutch that is rebuildable and optimized for strength without compromising weight or moment-of-inertia. Each clutch also utilizes the latest in gear-drive technology, with .104 in. race or .250 in. "rally" friction material that allows for quick, smooth shifts, plus slotted pressure plate and floater plates allow for better gas evacuation and superior cooling. Quarter Master Optimum-RR Series clutch kits include: * Optimum-RR Clutch with button-type flywheel * Tri-Lite hydraulic release bearing offering more reliable service and adapter * All necessary hardware, including clutch fasteners and replacement flywheel bolts
Not Yet Reviewed
$2,275.44
—
$2,361.33
ACT Mod-Twin 225 heavy-duty twin-disc street clutch kits are designed to tackle aggressive launches and rapid shifting of high powered AWD's—by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a more consistent light pedal feel. The puck-style friction plates, with high-quality organic materials, deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. Clutch kits are available in different styles and other options for fitment on countless vehicles from the early 2000s and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or unsprung mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.
Not Yet Reviewed
$2,047.00
Stock clutches are made for stock horsepower. Mantic Clutch USA triple disc clutch kits should be your choice for any big horsepower build, handling 1,515 lb.-ft. of torque capacity at the crank and roughly up to 1,250 to 1,285 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Perfect for supercharger, nitrous, or turbo performance builds, Mantic triple clutch kits, with their ceremetallic friction material and all-billet construction, are more durable yet very friendly for everyday driving. Pedal effort remains relatively low, approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic triple disc clutch kits are modular in construction offering ease of service and complete rebuildability. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * 9 in. triple disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
Not Yet Reviewed
$2,662.20
Centerforce TRIAD XDS clutch kits supply triple disc clutches developed for vehicles requiring a holding capacity of 500 to 1,200 ft.-lbs. of torque at the crank. For superior clamp load the billet pressure plates feature their patented centrifugal weight system (where applicable), while the patented ball bearing-actuated pressure plate (where applicable) provides light pedal effort. TRIAD XDS disc packs are equipped with metallic friction material for increased holding capacity and they are available in either sprung or solid hub styles, depending on application. The clutches are equipped with lightened billet steel flywheels providing low inertia, resulting in quicker rpms. Centerforce TRIAD XDS clutch kits may feature: * No complicated setup or adjustments * 8.75 in. diameter designed to lower inertia for heavy track use * Centrifugally assisted diaphragm to increase holding capacity with rpm * Solid hub design offers light weight and quick shifts * Patented multi-disc floating disc and drive disc designs * Holds 500 to 1,200 ft.-lbs. of torque at the flywheel * Patented ball bearing pressure plate * Specification card * Excellent driver control * Positive drive floater * Precision-balanced * ARP fasteners
Not Yet Reviewed
$2,309.95
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$2,159.00
—
$2,199.00
McLeod 4400 Series truck pull clutch kits are ideal for truck puller and high-horsepower sand drag applications. These discs are specifically designed for non-shifting motorsports and not intended for street use. To dominate the competition, you need performance engineered driveline components like the McLeod 4400 Series clutch system designed for your specific application. Product features include: * Borg & Beck pressure plates with counterweights * High-rpm lock-up capacity * Steel flywheel and sintered iron discs
Not Yet Reviewed
$2,555.00
ATS Diesel Performance Stage 6 automatic transmission rebuild kits are designed to give that old worn-out transmission a face lift and put the power to the ground! ATS Diesel takes the potent Allison 1000 platform and bulletproofs it with the parts you need in these Stage 6 rebuild kits to give you the edge over the track, towing a trailer or the competition. Stage 6 kit features: * Includes Triplelok torque converter * Pump calibration kit * ATS C1-C5 clutches * Valve body calibration (A and B trim valves) * Handles street/strip, sled-pulling, up to 1000rwhp and can still be daily driven * Co-pilot should be added to this kit (not included) to increase hydraulic torque capacity ATS manufactured C1, C2, C3, C4 and C5 clutch packs include: * C1 includes: ATS exclusive 16 single-sided friction plates with HD pressure plate * C2 includes: Eight friction plates and eight laser-cut steel plates with step ground pressure plate * C3 includes: Five ATS exclusive full friction plates and laser-cut steel plates with micro ground pressure plate * C4 includes: Six frictions and five laser-cut steels * C5 includes: Six frictions and five laser-cut steels
Not Yet Reviewed
$3,564.99
ATS Diesel Performance Stage 7 automatic transmission rebuild kits are designed to give that old worn-out transmission a face lift and put the power to the ground! ATS Diesel takes the potent Allison 1000 platform and bulletproofs it with the parts you need in these Stage 7 rebuild kits to give you the edge over the track, towing a trailer or the competition. Stage 7 kit features: * Includes Triplelok torque converter * ATS pump kit * ATS C1-C5 clutches * Valve body calibration (A and B trim valves) * ATS Co-pilot transmission controller * Increased towing capability, power holding to 1000+ hp * Best for mild street/strip and sled pulling use ATS manufactured C1, C2, C3, C4 and C5 clutch packs include: * C1 include: ATS exclusive 16 single-sided friction plates with HD pressure plate * C2 includes: Eight friction plates and eight laser-cut steel plates with step ground pressure plate * C3 includes: Five ATS exclusive full friction plates and laser-cut steel plates with micro ground pressure plate * C4 includes: Six frictions and five laser-cut steels * C5 includes: Six frictions and five laser-cut steels Note: Deep transmission pan required for Co-Pilot install.
Not Yet Reviewed
$4,654.99
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$3,995.95
—
$4,559.95
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,750.95
—
$4,995.00
Chevrolet Performance developed the new SuperMatic 6L80-E 6-speed automatic transmissions with upgraded internal components, offering an exceptional torque rating of 650 lbs.-ft. That's a 45 percent increase over regular-production versions of this same transmission. A deep first gear enables strong launch performance, while the top gear supports balanced performance on the highway. They're for use with Chevrolet Performance LS and LSX crate engines in 2WD applications. SuperMatic 6L80-E transmissions features include: * 2,400 to 2,800 stall converter * Electro/hydraulic controls with clutch-to-clutch shifting * Output torque rating of 650 lbs.-ft. * Gear ratios: 4.02 (1st), 2.36 (2nd), 1.53 (3rd), 1.15 (4th), 0.85 (5th), 0.67 (6th) * Lightweight diecast aluminum case contributes to dry weight of approximately 195 lbs. * Uses DEXRON VI premium fluid * Truck-style production oil pan * Production vent tube assembly * Approximately 23.5 in. long * Controller and harness, with calibrations for street and track * Harness also includes paddle-shift connection, transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters, and more * Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings
Not Yet Reviewed
$5,182.26
—
$5,569.07
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$2,122.95
—
$4,976.95
Perfect for a mild daily driver or street rod, these TCI Street Rodder transmission packages give you all of the components necessary to install a new transmission. Using the highest quality TCI manufactured components, each Street Rodder package is equipped with an automatic valve body and valve body performance improvement kit that allows you to achieve firmer, yet not too harsh shifts in the vehicle while remaining fully automatic and retaining the stock shift pattern. Each Street Rodder transmission and torque converter undergo the industry-recognized triple testing to verify that internal fluid pressures and shift characteristics match the strict TCI quality control standards. Torque converters are tested to maintain that the impeller body and pump drive hub remain true and are then pressurized and lead tested to confirm the integrity of the weld seams. Finally, each unit is computer balanced to reduce drivetrain vibrations that can cause serious damage to your converter. For street cruisers who want excellent street performance and lasting durability, the TCI Street Rodder transmission packages provide the prefect solution.
( 1 )
$4,612.95
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan
Not Yet Reviewed
$4,945.00
Summit Bucks
Sonnax Smart-Tech drum modules for racing GM TH400 transmissions improve on-track performance and consistency, leading to quicker ETs, more wins, and greater reliability. The TH400 is preferred for its overall durability and multitude of available ratios, but is known to be heavier and less efficient than the popular two-speed Powerglide. Part of the TH400 inefficiency results from the fact that the direct drum counter-rotates, spinning backwards in 1st gear, brakes to a complete stop on the 1-2 shift, then goes from 0 RPM to input RPM on the 2-3 shift. Significant energy is wasted through this cycle that robs power, upsets traction on the shifts, and contributes to broken internal parts. Compared to aluminum direct drums, the Smart-Tech drum module reduces the weight of the counter-rotating components by over 3.3 lbs.! And more significantly, because the weight of the Sonnax counter-rotating parts is closer to the centerline, there's a 68 percent reduction in energy required to stop and restart during the 1-2 and 2-3 shifts. The benefits are increased wheel horsepower, better acceleration, less shock on the shifts, and improved durability. * Complete kit (34555-01K) replaces both forward and direct drums and includes everything from intermediate sprag to the pump; a selection of Sonnax input shafts is available separately. * 100 percent new content, no used core pieces * Includes larger-diameter, 36-element sprag and sprag race that works with OE intermediate clutches * Includes six-friction forward clutch pack and seven-friction direct clutch pack Contents: * Forward Piston Housing * Forward Piston * Forward Piston Return Springs (16) * Forward Spring Retainer * Forward Snap Ring * O-Ring 1.674 in. * Lip Seals (2) * Direct Housing Assembly * Direct Piston * Direct Piston Return Springs (26) * Direct Spring Retainer * Direct Snap Ring * O-Ring 2.737 in. * Sprag Shaft * Front Sprag Retainer Plate * Heavy-Duty Sprag 36 Element * Outer Sprag Race * Rear Sprag Retainer Plate * Sprag Retainer Screws (4) 6-32 x 5/16 in. * Quad Ring Seals (2) * Anti-rotation Seal Rings (2) * Drum * Pressure Plate * Outer Snap Rings (4) * Bearing Small * Forward Clutch Hub * Bearing Large * Direct Clutch Hub * Steel Clutch Plates (4) .060 in. * Steel Clutch Plates (11) .077 in. * Friction Clutch Plates (13) .080 in. * Clutch Separators (60) .103 in.
Not Yet Reviewed
$3,052.40
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$2,700.95
—
$5,119.95
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L60E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Raybestos Stage 1 frictions and steels * TransGo heavy-duty reprogramming kit with Shift Command * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 10-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * High-energy wide bands * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (chrome) * Transmission mount * New OE steel transmission pan
Not Yet Reviewed
$4,945.00
Chevrolet Performance SuperMatic transmission control systems make it easy to connect and cruise. These controller kits complement the ready-to-run convenience of your crate engine with plug-and-play operation. There is no additional wiring, and the leads are clearly marked to link up with the engine control harness. SuperMatic control systems are pre-programmed to provide full-function transmission operation after completing the connections. No laptop programming is required. Chevrolet revised the systems with a more compact design for a headache-free installation with your carbureted small block, big block, or ram jet engine—and they're compatible with OBDII code readers. Get in gear with the simplicity and improved shift performance offered by Chevrolet Performance SuperMatic transmission control systems.
Not Yet Reviewed
$2,120.96
Chevrolet Performance developed the new SuperMatic 6L80-E 6-speed automatic transmissions with upgraded internal components, offering an exceptional torque rating of 650 lbs.-ft. That's a 45 percent increase over regular-production versions of this same transmission. A deep first gear enables strong launch performance, while the top gear supports balanced performance on the highway. They're for use with Chevrolet Performance LS and LSX crate engines in RWD applications. SuperMatic 6L80-E transmissions feature: * 3,000 to 3,400 stall converter * Electro/hydraulic controls with clutch-to-clutch shifting * Output torque rating of 650 lbs.-ft. * Gear ratios: 4.02 (1st), 2.36 (2nd), 1.53 (3rd), 1.15 (4th), 0.85 (5th), 0.67 (6th) * Lightweight diecast aluminum case contributes to dry weight of approximately 195 lbs. * Uses DEXRON VI premium fluid * Truck-style production oil pan * Production vent tube assembly * Approximately 23.5 in. long * Controller and harness, with calibrations for street and track * Harness also includes paddle-shift connection, transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters, and more * Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings
( 2 )
$5,182.26
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
