Availability
Showing In Stock Items. Show All 155 Items.
Shifnoid air shifter replacement components help maintain optimal operation of your air shifter. They offer everything from CO2 line to bottle valves, as well as fittings, seals, and washers. To ensure the best performance, service your Shifnoid shifter with their genuine replacement components.
( 5 )
$29.99
—
$49.99
ARB offers Air Locker replacement parts for their air-powered locker systems. With all the support parts you need, ARB will keep your air locker system operating at peak condition for miles and miles.
( 17 )
$23.00
—
$52.00
ARB air line service kits—never adventure without them! These Air Locker air line trail repair kits are designed for a quick and easy fix while away from the shop. ARB air line trail service kits contain: * Two 5mm (blue air line) splice connector * 6.75 ft. of air line * Two air line support tubes * Two 5mm ferules * Bulkhead O-ring (seal housing)
( 1 )
$39.95
Air Locker offers cross shaft fasteners for a variety of differentials. These kits contain the four retaining pins that hold the cross shafts into the locker housing. The fasteners are machined from steel with a natural finish, and designed from factory specs to ensure proper fit and long-lasting performance. Order the kit recommended for your axle application.
Not Yet Reviewed
$25.00
Shifnoid CO2 bottle backup air fillers use your regulator to maintain the preset pressures, and enable you to use compressed air directly from your air tank or air compressor to fill your CO2 bottle. Putting a standard valve on the high-pressure side can be dangerous, and if you try to fill it from the regulated side, it won't fill completely. By having these backup air fillers on your tank, you can quickly, easily, and safely fill your CO2 bottles and have them ready for immediate use.
( 1 )
$24.99
DRP Performance ultra low drag hub seals are premium quality, full-PTFE lip seals. They offer less than 1 in.-lb. of resistance per seal. The lightweight aluminum house provides a true seal to prevent debris from getting to the hub bearings. Seals increase hub free spin and reduce drag and rotating weight. Reusable when removed properly. Order the size designed for your application.
Not Yet Reviewed
$34.00
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$20.99
—
$46.99
Summit Racing™ bellhousing separator plates are designed for Ford small block engines. These plates are precision-cut from aluminum or steel for durability and also feature special ventilation holes for improved air circulation. They provide the correct fit in small blocks to locate the engine components in just the right place. Summit Racing™ bellhousing separator plates are engineered to work with automatic transmissions, and fit both 157-tooth and 164-tooth flexplates.
( 85 )
$52.99
Remote clutch bleeder lines from Hinson Motorsports turn a tricky process into a simple one-person job! Clearing your hydraulic system of trapped air takes only minutes with these braided stainless steel lines. Just attach the 4 ft. bleeder hose to your slave cylinder and zip tie it permanently to any area you can easily reach. Afterward, you can crack open the bleeder end fitting once when needed, and close it when the air gets released from the clutch system. Verify the fitment and order the Hinson Motorsports remote clutch bleeder lines designed for your application.
( 42 )
$53.49
DRP Performance offers premium low drag bearing kits for a wide range of applications, including many Ford, Chevy, and Pontiac cars from the 1960s, '70s, '80s, and '90s. Low drag hub components reduce friction and lower temperatures, making your wheels spin easier, delivering more horsepower to the track—all while reducing maintenance and making your race car faster. Enhance your performance on oval track asphalt, oval track dirt, drag racing, road racing, and street applications. Kits include a DPR bearing spacer, DRP Premium Super finished Bearing Kit, and DRP Ultra low drag seal. Here are details on each component: * DRP Bearing Spacer: A difference you can feel—in the pits and on the track. Bearing spacers make the most difference of any low drag hub upgrade. Properly installed, these spacers will provide an immediate increase in hub free spin, an improvement large enough to feel just by pushing the car around. And the benefit doesn't stop there. Bearing spacers make the most difference when a side load (cornering force) is applied. Drivers have commented on how much faster a car with bearing spacers free rolls when entering and through the center of the corner. Bearing spacers simplify and reduce hub maintenance. Spindle nut torque is no longer sensitive. In fact, with spacers installed, you can tighten the spindle nut as much as you want without overtightening the bearings. (DPR recommends 20-40 lbs.-ft.) Bearings will run cooler and do not need to be repacked as often. Bearing spacers are simple to install. DRP bearing spacers have a threaded adjustment, allowing the user to quickly set bearing end play or preload. A set-screw locks the spacer at the desired adjustment. Once installed, they do not need to be readjusted unless you replace the hub or bearings. Bearing spacers are used in virtually every application in professional motorsports. * DRP Premium Super finished Bearing Kit: Reduce bearing temperature by over 100 degrees F verses stock bearings! Increase free spin by over 250 percent! DPR starts with premium quality bearings and puts them through a super finishing process. This process removes the grind marks and greatly smooths the surface of the bearing roller, while leaving a "hatch" pattern to retain grease. Quality wheel bearings will last the life of most racing applications. * DRP Ultra Low Drag Seal: …billet aluminum, full PTFE sealing lip, reusable, great for any application: dirt, asphalt, road race, street Decrease seal drag by over 1,000 percent! Air gap seals create an "air curtain" to keep debris out and eliminate drag completely! DRP Ultra Low Drag hub seals are true, purpose-built, high performance seals. The housing is made from lightweight aluminum. The sealing element is a special PTFE blend, giving it natural low friction qualities. Seals are reusable. Order the kit recommended for your vehicle.
Not Yet Reviewed
$47.05
—
$48.25
Allstar Performance transmission breather kits provide a remote location for adding a larger breather to many popular manual transmissions. These kits relocate the exit location and help prevent fluid from leaking or blowing out. They include a remote breather, 15 in. vinyl-coated braided stainless steel line, mounting bracket, and adapter fitting with 1/8 in. NPT threads. Provide the air your hard-working vehicle needs with an assist from Allstar transmission breather kits!
Not Yet Reviewed
$37.99
Summit Bucks
If you're having trouble with your hydraulic clutch releasing, there's a good chance you may have air in the system. Bleeding your clutch line can be done more easily with Russell hydraulic clutch speed bleeder assemblies. These are a replacement for your original bleeder valve, with a spring-loaded one-way ball and check valve design. When opened, this unique setup allows the old fluid and air out, and then closes automatically between pumps to prohibit the old air and fluid from re-entering the line. It's a real time-saver!
( 10 )
$28.95
When servicing your air locker, only trust genuine ARB components like these differential shims to ensure for proper operation of your ARB locker. These shims are high-quality OE components that are found in the ARB locker for optimal performance. ARB provides 4WD accessories to the entire world, and the company's success is due to the fact that ARB designs and produces premium quality products that are both tough and dependable.
( 1 )
$25.00
Pacific Performance Engineering filter spacer blocks make a difference with their Viton® O-rings. They properly place the filter/pickup further down into the fluid on deep transmission pans. The blocks are fitted with Viton® O-rings to create a seal that's leak-free and won't suck air or starve for fluid. Don't risk transmission failure. If you have a heavy-duty deep transmission pan, you really need to use Pacific Performance Engineering filter spacer blocks for the proper positive seal.
Not Yet Reviewed
$44.99
Drag racers depend on CO2 to power several parts of their car—including clutches, air shifters, and even parachutes. But at the starting line, nothing is more important than CO2 allowing your throttle to go wide open at preset rpm. Shifnoid CO2 bottle mounts will hold your cylinders securely in place and ready for use. These brackets are offered in various materials, such as polished billet aluminum and heavy-duty plastic, and they'll mount to a flat surface or roll bar, depending on the model you select. The bottle holders are also available for large and small CO2 cylinders. Get off the line faster with Shifnoid, a leader in drag racing technology!
Not Yet Reviewed
$26.99
—
$49.99
Make sure that you get all of the air out of your system with one of these Tilton hydraulic throwout bearing bleeder screws. They are manufactured from durable materials, and install directly onto the Tilton hydraulic throwout bearing body. Ensure simple and effective air evacuation from your hydraulic brake system when you use Tilton hydraulic bearing brake bleeder screws.
( 4 )
$50.15
KaferLab clutch adjustment nuts are must-haves for all air-cooled VWs. These precision-crafted nuts take the pain out of adjusting your VW's clutch and bring pleasure to your eyes. Each nut is machined from the finest quality material to last a lifetime of operations. Dial in your clutch with KaferLab.
Not Yet Reviewed
$29.95
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 113 )
$26.99
—
$27.99
Yukon Gear & Axle axle bearings are made from top-quality materials to original specs, so you can be sure that you're getting a quality product. These replacements are available for a variety of axle model applications, from the 1950s and up.
( 69 )
$31.99
—
$44.89
Centerforce throwout bearings are made to withstand the wear and tear that clutches go through. They are designed to provide reliable service, race after race.
( 123 )
$57.95
—
$62.95
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 186 )
$40.95
—
$52.95
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 187 )
$27.14
—
$54.19
Timken pinion bearings offer durability and peace of mind. Known the world over, Timken bearings are precision-engineered to provide you with superior quality, along with energy-efficient and cost-effective friction management. For a proper fit that will run smoothly, these single-row tapered roller bearings are your best bet when replacing old and worn pinion bearings. Timken bearings are available for dozens of axle types; choose the models that match your vehicle specs.
( 56 )
$23.99
—
$33.99
Yukon Gear & Axle crush sleeve eliminator kits replace your crush sleeve with a shim and spacer setup. These kits offer an economical way to enhance your setup and make it more precise. Have you ever over-tightened a crush sleeve? You toss it and start over with a new one. Yukon Gear & Axle crush sleeve eliminator kits remove the hassle—so setting preload is easier. Order the kit designed for your axle model application.
( 69 )
$55.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
