Availability
Showing In Stock Items. Show All 37 Items.
ARB offers Air Locker replacement parts for their air-powered locker systems. With all the support parts you need, ARB will keep your air locker system operating at peak condition for miles and miles.
( 17 )
$23.00
—
$52.00
ARB air line service kits—never adventure without them! These Air Locker air line trail repair kits are designed for a quick and easy fix while away from the shop. ARB air line trail service kits contain: * Two 5mm (blue air line) splice connector * 6.75 ft. of air line * Two air line support tubes * Two 5mm ferules * Bulkhead O-ring (seal housing)
( 1 )
$39.95
Air Locker offers cross shaft fasteners for a variety of differentials. These kits contain the four retaining pins that hold the cross shafts into the locker housing. The fasteners are machined from steel with a natural finish, and designed from factory specs to ensure proper fit and long-lasting performance. Order the kit recommended for your axle application.
Not Yet Reviewed
$25.00
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$20.99
—
$46.99
When servicing your air locker, only trust genuine ARB components like these differential shims to ensure for proper operation of your ARB locker. These shims are high-quality OE components that are found in the ARB locker for optimal performance. ARB provides 4WD accessories to the entire world, and the company's success is due to the fact that ARB designs and produces premium quality products that are both tough and dependable.
( 1 )
$25.00
Timken pinion bearings offer durability and peace of mind. Known the world over, Timken bearings are precision-engineered to provide you with superior quality, along with energy-efficient and cost-effective friction management. For a proper fit that will run smoothly, these single-row tapered roller bearings are your best bet when replacing old and worn pinion bearings. Timken bearings are available for dozens of axle types; choose the models that match your vehicle specs.
( 56 )
$23.99
—
$33.99
Yukon Gear & Axle crush sleeve eliminator kits replace your crush sleeve with a shim and spacer setup. These kits offer an economical way to enhance your setup and make it more precise. Have you ever over-tightened a crush sleeve? You toss it and start over with a new one. Yukon Gear & Axle crush sleeve eliminator kits remove the hassle—so setting preload is easier. Order the kit designed for your axle model application.
( 69 )
$55.89
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 47 )
$24.99
Are you setting up a rear-end? These Motive Gear differential carrier shim kits will make the job easier. They come with a variety of shims, so you're sure to find the best fit for your vehicle; plus, they're made of steel for durability. Whether you're installing a new setup or refreshing an old one, you can trust the Motive Gear differential carrier shims designed for your application to make the job a snap.
( 36 )
$21.99
—
$23.99
Auto Metal Direct differential covers are just like the originals. These are correct reproductions of original equipment covers--without the subtle differences often found on other service replacements. These AMD high-quality, technically correct covers include some that are officially licensed GM restoration parts, which means that the fit and function will be perfect for your classic. Restore your ride with the right originals--differential covers from Auto Metal Direct.
( 7 )
$50.99
Yukon Gear & Axle Super carrier shims come in handy when setting up your new ring and pinion or carrier. A variety of steel shims is included in the kits. Order the kit designed for fitment with your axle model—then set just the right amount of play between your gears.
( 58 )
$34.99
—
$47.99
Yukon Gear & Axle pinion shims help seat your pinion gear properly. These steel inner and outer pinion shims assist you in setting up the right depth and preload for your application. If you need pinion shims, Yukon Gear & Axle offer quality and value.
( 19 )
$27.99
—
$35.99
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 66 )
$49.99
Motive Gear differential cross shafts and fasteners are forged, heavy-duty pins. They're shorter than the factory pins to provide more clearance for side gear preload. Whether you're using a mini spool, positraction, or standard differential, Motive Gear differential cross shaft pins are an excellent choice for your high performance vehicle. Order the model recommended for your axle application.
( 2 )
$22.99
—
$23.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$34.99
Certain high numeric ratio gear sets require special notched crosspins for proper installation. These Yukon Gear & Axle crosspins and shafts are made for some of the Yukon-designed ring and pinion sets that need aftermarket crosspins and shafts to work with their parts. The differential components are available for more than two dozen axle models, so match your vehicle to the proper direct-fit replacement. They're manufactured from hardened steel or chromoly for maximum durability.
( 10 )
$28.99
—
$41.89
To borrow a line from the candy bar commercial, sometimes you feel like a nut… And when that particular need arises, Yukon Gear & Axle pinion nut washers are a quality choice. Maybe your old pinion nut washer is corroded, too loose, or broken altogether—all good reasons for a Yukon replacement. They're machined to OEM specifications and made from quality materials for durability. Order the replacement washers recommended for your axle application.
( 6 )
$29.99
Richmond Gear pinion bearing spacer and shim kits are great for installing your ring and pinion gear sets. They have a solid spacer that can be reused if you need to take apart and reassemble the carrier.
( 17 )
$49.99
Motive Gear offers differential carrier and pinion shim kits for a variety of applications, including many GM and Ford differential case design types. Machined from steel, these drivetrain accessories are used to move the pinion closer to the ring gear—to move the drive pattern deeper onto the tooth and slightly toward the toe. Achieve proper driveline geometry during assembly and setup with a set of shims from Motive Gear.
Not Yet Reviewed
$29.99
You don't need to change bearings--all you need is the basics. Richmond Gear ring and pinion installation half kits include some of the same quality parts as their larger kits, but just enough to do the job well. Most half kits include a cover gasket, crush sleeve, pinion sleeve, and shims. Don't buy more than you need--pick up Richmond half installation kits.
( 16 )
$34.99
Installing a new ring and pinion? Motive Gear will make things easier with these differential pinion shims. They're made of steel for the ultimate durability and will keep everything in line just as they should be. Motive Gear offers these differential pinion shims in a kit so you can customize the thickness to your car's individual needs. Order the set that corresponds with your axle model.
( 21 )
$38.99
Yukon Gear & Axle offers top-quality small parts, like these replacement crosspin bolts, to help you complete your differential repair, rebuild, restoration or upgrade. They're manufactured from hardened steel for maximum durability and engineered to fit specific axle model applications. For all your differential part needs and more, look no further than Yukon Gear & Axle.
( 11 )
$31.99
Do you need to install new crush sleeves? Motive Gear offers differential crush sleeves for controlled preload. You can depend on their steel collars to slip in between the bearings and keep the pressure on as you tighten down the pinion nut. If you're replacing a pinion seal or setting up your differential, use Motive Gear crush sleeves for preload control.
( 12 )
$23.99
An old race should never be re-used with a new bearing--no matter how good its condition may appear to the naked eye. Timken pinion bearing races feature premium design, enhanced surface finishes, and are manufactured using quality materials to ensure longer bearing life and excellent antifriction properties. They work as a team with your bearings to keep your gears in motion. Timken bearing races are available as direct-fit OE replacements or for custom applications. Choose pinion bearing races from Timken on your next automotive job. Features include: * Designed to effectively reduce friction * Ultimate load-handling capability * Built for long service life * Meet high performance standards
( 21 )
$30.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
