Availability
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$1,553.99
—
$1,630.99
Currie 9-inch third members are designed to fit Ford 9-inch applications. The case is made from nodular iron and installed is a Currie TwinTrac® posi differential in 31 spline, or Eaton TrueTrac differential in the 35 spline options. All Currie third members include a big bearing "Daytona" pinion support, are fully assembled, and delivered ready to install.
( 6 )
$1,550.00
—
$2,200.00
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,549.95
—
$1,949.95
Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.
( 12 )
$1,554.99
—
$1,956.99
Clearance
Need traction? Zip! You've got it with Yukon Gear & Axle Zip lockers! With on-demand traction, these lockers offer an air-operated design that allows you to switch from an open differential to 100 percent lockup when you need it. Theses Yukon Zip lockers are the ultimate in driver selectability for the right traction, on-road and off. Built from forged cases with 4320 chromoly internals for added strength, they work with a variety of air-delivery systems and are assembled in the USA. Do you need gripping power--now? You have the control with Yukon Gear & Axle Zip lockers.
( 1 )
$1,539.99
—
$1,571.99
Clearance
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. Yukon Gear & Axle 4340 chromoly axles provide up to 50 percent more strength than stock axles … critical for extreme performance applications with large tires, high torque and high horsepower. These 4340 axles are manufactured using the latest technologies and the highest quality materials for long life in off-road, street and track use. Yukon Gear & Axle 4340 chromoly axles are offered in complete kits or individually.
( 36 )
$1,582.99
—
$2,371.99
What kind of hidden performance does your vehicle possess that's ready to be unleashed? Spicer Drivetrain Products differential carriers supply the power for you to find out! You can increase your off-road traction, maintain streetability, and get ready to rock and roll in your truck or Jeep with the selection of carriers offered by this legendary manufacturer. Spicer goes above and beyond so your rig can do the same! Order the model and options recommended for your vehicle.
( 43 )
$1,532.99
—
$1,770.99
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$2,197.99
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,756.99
—
$2,381.99
On Sale
VEGE Remanufactured drive axle assemblies enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured drive axles with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include steel axle shafts, third member, ring and pinion, wheel studs, bearings, and seals. Includes fluid. Hundreds of models are available, for fitment on countless 4WD, AWD, and RWD applications.
( 3 )
$2,039.99
—
$2,194.99
RCV Performance Ultimate CV axles simply replace your weak axle shafts with a high-strength design. Tests prove they are twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power, there are no worries. Ultimate CV axles are low maintenance and operate with a smoothness you can feel--whether off-road or on the street. And they back it all with a "No Questions Asked" limited lifetime warranty. Available for many vehicles, select the RCV Ultimate axle set designed for truck, SUV, or Jeep.
Not Yet Reviewed
$1,549.95
—
$1,949.95
Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.
( 30 )
$1,964.99
Spidertrax Off-Road's Spider 9 chromoly axle housings deliver a level of quality and performance that surpasses the industry's highest standards. Building on the platform of their previous award-winning Spider 9 housing, these chromoly housings are stronger, with heat-treated tubes and internal shell gussets. They accept 9 in. and 10 in. gears, are more versatile with 68 in. OAL, and work with standard and mid-engine setups. Each unit is TIG-welded on the outside and has a machined face. The housings are available for 3.5 in. or 4 in. axle tube diameter.
Not Yet Reviewed
$1,999.00
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,540.00
—
$2,125.00
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,678.99
—
$1,754.99
Build a bulletproof third member using these Strange Ultra cases. They require larger-than-OEM components and are therefore offered in these unique packages. The cases include: * Pinion support body * Pinion bearings and cups * Pinion bolts * Pinion depth shims * Pinion seal * Pinion nut * Side bearings and cups * Premium ring gear bolts * Tail bearing * Tail bearing retaining plate * Your choice of a 3.250 in., 3.812 in., or 4.000 in. bore diameter
Not Yet Reviewed
$1,594.99
—
$1,794.99
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,600.00
Moser Engineering Chrysler 8.75 in. third member assemblies are designed to help you get your power to the ground. They are made of nodular iron and fit a 489 case. They include a 29-spline yoke and motive gears. Moser Engineering has you covered when it comes to all of your third member assemblies.
( 1 )
$1,519.00
SPEC Super Twin multi-disc clutch and flywheel kits are designed for street and track use in vehicles with extreme horsepower and torque (700 to 1500 lbs.-ft.). They offer near-stock drivability, tremendous life expectancy, a no shimming/setup bolt-in installation, and maintenance-free operation. With their all-billet construction, these assemblies are smooth and quiet. Super Twins are constructed with aircraft-grade aluminum and high-carbon billet steel milled to industry-leading .001 in. tolerances for perfect balance and actuation. Friction is provided by dampened, full-faced, carbon-graphite discs. Additional features of SPEC Super Twin multi-disc clutch and flywheel kits: * Organic, fiber, and full-metallic versions are also available * Flywheel and track-spec hardware are included in each kit * Rebuildable by SPEC or the end-user * Replacement components are always available * Ideal for all types of use, including: street, drag racing, drifting, road racing, time-attack, pulling, and rally
( 3 )
$1,520.10
—
$1,749.60
SPEC Mini Twin multi-disc clutch and flywheel kits are intended for limited street, drag race, and road race applications. The Mini Twin assemblies are available in different clutch disc and flywheel materials, clamp loads, disc configurations, and diameters depending on the particular application and on the planned use the of vehicle. SPEC manufactures Mini Twin multi-disc clutch and flywheel assemblies to industry-leading .001 in. tolerances for perfect rotational properties and concentric actuation to optimize balance, drivability, and clutch life. Additional features of SPEC Mini Twin multi-disc clutch and flywheel kits: * Flywheel and track-spec hardware are included in each kit * Rebuildable by SPEC or the end-user * Replacement components are always available * Also excellent for drift, time attack, pulling, and rally
( 2 )
$1,970.10
Upgrade your Wrangler's rear axle with TeraFlex 8-lug full-float conversion kits! Heavy wheels and oversized tires, high-speed impacts, and low-range twisting and binding can take a toll on the factory-style axle shafts and wheel bearing assemblies. Even an upgraded 35-spline axle conversion shaft is subject to the same limitations. These TeraFlex full-float kits use a 2-wheel bearing design to spread the weight of the vehicle evenly across the forged 4140 chromoly spindles, removing vehicle weight from the axle shaft. Readily available industry standard bearings are oil bathed and require zero maintenance; while all factory sensors are maintained and protected—and OE park brakes, as well as the calipers and pads, are retained. Kits include a 13.5 in. performance rotor and anchor bracket for increased and balanced braking.
Not Yet Reviewed
$1,755.97
Moser Engineering US Gear Pro Series ring and pinion gear sets are CAD-designed, CNC-machined, and computer control heat-treated to ensure you receive the highest quality and best performing components on the market. These Pro Series street/strip gears by Moser are capable of handling most applications. Racing professionals and performance enthusiasts trust Moser US Gear products. They set the standard for high-quality gear sets that are manufactured to the highest material and process standards. Select the size, ratio, and other gear options recommended for your axle application.
Not Yet Reviewed
$1,615.00
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 32 )
$1,595.99
—
$2,010.99
Strange Ford 9 in. lightweight aluminum center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled aluminum case with a full spool, forged aluminum pinion support, S-series yoke, and ring and pinion set. A specification sheet is required to be filled out prior to ordering.
( 2 )
$1,648.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
