Availability
Showing In Stock Items. Show All 47 Items.
Summit Racing™ Pro Bracket Race Torque Converters are what you need to get minimum ET's with maximum consistency round after round. Designed for bracket race use we have partnered up with a top converter builder to bring you an ultra-high quality converter right off the shelf at a bracket racers price point. With 8, 9, or 10 in. configurations to work for most small block and big blocks up to 555 cubic inches, we can get you on, and down the track in short order. Follow the stall chart to find the weight of your car, cubic inch, and horsepower range, then select your desired stall and order it up and go racing. Custom options not available. Features and Benefits * Steel stators in all versions * Furnace brazed pump and turbine * Dual anti-balloon plates * TIG-welded blades * Torrington bearings * Computer welded and balanced * Designed for 327-555 cu. in. engines * Turbo spline only (no bushing needed in PG stator support tube) * Stall speed ratings range from 4,400 to 6000 * .090/.125 and .250 thick motor plate versions available
( 3 )
$1,149.99
—
$1,389.99
On Sale
FTI Performance SST Series custom-order torque converters are available for use with a variety of transmissions, including Powerglide, THM350, and THM400. The 9 in. units are used by top drag racers. A torque converter is what transmits torque from the engine to a rotating driven load. It's a type of fluid coupling which allows the engine to spin somewhat independently of the transmission. SST Series torque converters are available with a 0-blade stator for a turbo spline, or the looser 6T stator model.
Not Yet Reviewed
$1,149.00
$1,034.10
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,049.95
—
$1,599.95
Yank Performance introduces its new line of Power Adder Series (PAS) converters. These are 9.5 in. billet converters based around the successful SS Series product line. This new line of converters is specifically designed for power adder cars with NOS, small turbo, or superchargers. These models will couple up quicker and multiply torque harder. They're rated to 650 RWHP. Order the model with bolt circle designed to fit your application. Additional details: * One-piece roller burnished flanged impeller hub * New Torrington bearings * Fully furnace brazed pump and impeller * Hardened input and turbine splines * Extra-wide oversized lockup clutch material to handle added abuse put down by more horsepower and torque
Not Yet Reviewed
$1,206.99
GForce Renegade axle shafts offer big league strength and performance at a fair price point. They're direct replacements for your factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos. CNC-machined from proprietary aerospace billet alloy, Renegade axles feature upgraded spline counts on the axle bar and CV joints—providing more engagement. This allows for larger diameter bars equaling more strength, as well as more travel and increased operating angle over OEM CV joints. GForce Renegade axle shafts are a leap above entry-level, with hand-built assemblies utilizing premium materials and carefully controlled processes. Order the pair recommended for your vehicle application. Features include: * Anti-wheel hop technology—significant reduction during hard launches * Direct bolt-in fit and finish * 31-spline severe-duty CVs * Stronger one-piece CNC-machined inner and outer stubs * Powdercoated axles for corrosion protection * Black E-coat finish on inner and outer stubs to protect against harsh conditions, without impeding spline engagement
( 5 )
$1,199.00
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 68 )
$1,419.99
—
$1,549.99
Summit Racing™ Cummins to GM bellhousing adapters can facilitate a swap for your GM truck or SUV. Our kits include a billet aluminum adapter plate that's less than 2 in. thick and a steel flywheel. And, unlike OEM adapters, these allow your engine and transmission to be placed straight—not at an angle. They're available for different transmission models. When you want a clean install that's easy and will save you some room, Summit Racing™ Cummins to GM bellhousing adapters are the right choice.
( 16 )
$1,133.99
ATI Performance automatic transmission drums eliminate the need for steel bushings and sleeves that can expand under heat and come loose, ultimately causing transmission failure. They come equipped with Torrington bearings and are designed to triple clutch life and lower ETs.
( 9 )
$1,074.99
—
$1,159.99
ACC Performance LS Wild Boar Outlaw converters are built with the same quality parts as the Boss Hogs, but have the added features of welded fins (or furnace-brazed upon request) and anti-ballooning plates. These converters were designed for applications with added horsepower, such as nitrous and trans-brake. The Outlaw converters are 9.60 in. in diameter and have stall speeds ranging from 2,800 to 4,2000 rpm.
( 1 )
$1,048.48
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$1,031.98
On Sale
FTI Performance SRL-3 Series billet triple clutch torque converters are designed for engines with some serious power! They're engineered to be locked up under full throttle and can withstand some abuse. The billet lockup piston, triple bearings, and anti-ballooning impeller hub are designed to get the job done. These converters are available in different stall torque ratios and stall ratings to match your engine and transmission combination.
( 6 )
$1,299.00
—
$1,429.00
$1,169.10
—
$1,286.10
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$1,097.99
All Hughes Performance Pro Competition 45 Series converters have a full needle bearing replacement of fiber washers. Special silicon spot brazing on top and bottom adds strength and reliability. Hughes installs a premium-built sprag assembly and a specially machined stator in these converters, giving you the performance edge you need off the line.
( 3 )
$1,034.99
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 232 )
$1,089.99
These ATI automatic transmission shifters feature gate-type shift patterns with extremely smooth action. ATI Performance Products uses high-quality components throughout the shifters, including the custom Morse cable. Available for different types of automatic transmissions, ATI automatic transmission shifters are perfect for the street or strip. The shifters are designed for either forward or reverse valve bodies and have bolt-in gate plates for use with multiple transmissions.
( 1 )
$1,067.99
ATI Super Pump front pumps are CNC-machined from billet aluminum or permanent-mold aluminum castings for precision and durability. Re-engineered lubrication circuits allow for increased flow volume in all critical areas. ATI increased the thickness of the pumps to improve oil pressure and volume at low rpm, resulting in a cooler-running transmission and converter. Features: * Superior pressure * Improved trans-brake hold * Prevents stator tube spinout
( 4 )
$1,092.99
Nothing is tougher on a torque converter than putting it behind a blown fuel engine. Made for supercharged engines, ATI Fuel & Blown torque converters are designed for the ultimate in high-horsepower holding for big cubic inch nitrous or supercharged engines. They feature a special 22-element sprag with double-cage construction to simultaneously control each sprag element. The sprag sits in concentric races that are heat-treated to 65 on the Rockwell C scale. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,499.00
ATI Treemaster torque converters use all-new internal components that are designed to optimize efficiency and durability for each piece. They are computer-mated to your combination to take full advantage of your engine's torque curve. Specific stator designs are used to achieve free speed when up against the converter, and instant lockup when using a brake. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
( 2 )
$1,059.99
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$1,489.95
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$1,005.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
