Availability
Ford Performance Parts axle girdles are a great way to strengthen the rear-end of your car. Made of lightweight aluminum, they incorporate load bolts that provide additional support for differential bearing caps. Because they reduce the amount of flex in your differential while under load, they significantly reduce bearing wear and chipped teeth on the ring and pinion. They provide increased ring and pinion gear life and are a definite must for all racing and high performance street cars. Additional information: * Available for a variety of applications, including some independent rear suspensions * Replaces OE rear cover * Covers with cooling fins and machined for differential cooler pickup and return fittings recommended for road racing or extended high-speed/high-temperature applications * Models equipped with differential coolers may require modifications * Check exterior clearance to chassis/suspension
( 77 )
$252.99
Mevotech offers TTX wheel bearing and hub assemblies for a wide range of applications, from the 1990s and up. TTX parts are engineered with cutting-edge technology to be the strongest, most durable parts on the market. Built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks, these hub bearing assemblies deliver extreme performance. Plus, their innovative Labor Saver designs and hardware make installations faster and easier. TXX components excel in the most demanding operating environments. Order the assemblies recommended for your vehicle. Additional details: * ENGINEERED INTERNALS FOR OPTIMUM PERFORMANCE: Precision-engineered higher grade rolling elements and optimized geometry to minimize rolling resistance and maximize load distribution. * ENHANCED SEAL FOR CONTAMINANT PROTECTION: Low-friction, heavy-duty Advanced Quantum Sealing System with a multi-lip profile that provides layers of defense to keep contaminants out and vital grease in. * PRE-FILLED WITH EXCLUSIVE LUBRICATING TECHNOLOGY: NanoCeramic lubricant withstands extreme temperatures, resists corrosion, and retains viscosity; particles act as microscopic bearings to reduce friction. * ZERO-FAULT WHEEL SPEED SIGNAL: A molded, abrasion-resistant cord guards against perforation and contaminants at the sensor and plug ends to ensure a faultless signal for ABS and vehicle safety systems. * QUICK AND EASY INSTALLATION: Make your installation faster and easier with fastening hardware and torque specifications right in the box. * CORROSION PROTECTION: Repel-TEK anti-corrosion coating is applied to every surface, including studs and hardware, to prevent buildup and contaminant intrusion for a longer part life. * INCREASED PART DURABILITY: Designed with roll forming to lock internal components for a set preload right out of the box; increased assembly stiffness reduces vibration and improves part life.
( 6 )
$102.99
—
$281.99
These Fidanza short-throw shifters feature aluminum and hardened steel construction. They are machined using 3-D imaging to get the finest profile for fit and functionality. The shifters can use the stock knob or include a new knob, depending upon your vehicle model.
Not Yet Reviewed
$104.99
—
$251.99
TCI Automotive now offers a new 6 in. tailhousing to replace hard-to-find OEM parts for the PRO-X TH350 transmissions. These cast aluminum tailhousings feature a low-profile, lightweight design with improved strength for drag racing applications.
( 2 )
$109.95
When off-road, encountering obstacles and hazards that could inflict expensive damage to your differential is inevitable. ARB differential covers are made from high-tensile strength nodular iron (tougher and harder than carbon steel); they are engineered to protect the differential and ring and pinion from off-road hazards. Available for a select line of differentials, they are offered in red or black powdercoated finishes. Features of ARB differential covers include: * Computer-optimized, cross brace design increases the structural rigidity of the entire axle * Helps keep the ring and pinion gears meshing on the flat faces of the teeth--greatly increasing ring and pinion life and overall strength * Top-quality, rare earth magnets on both the drain plug and dipstick collect metallic particles * Dipstick magnet allows the oil to be checked for tell-tale signs of internal damage * Prolonged carrier bearing life (especially on high-output vehicles) from improved support of bearing alignment * Approach/departure angles optimized by angled exterior surfaces that minimize hang-ups * Unique dipstick/filler cap design allows differential oil level to be adjusted for rotated differential housings * Low-profile drain plug resists damage from obstacles * High-strength cap screws (included) are recessed into the cover for impact protection
( 26 )
$209.95
—
$219.95
Artec Industries JL/JT APEX front axle armor kits include everything you need to make your factory housing the strongest it can be—including APEX front axle truss, front LCA skids, and inner C-gussets. Order the armor recommended for your Jeep application. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 6 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and FAD (front axle disconnect) and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Bridges the front axle disconnect (FAD/CAD), shown to be one of the weakest sections of the front axle * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids and optional JL Shield are made from 1/4 in. steel * Inner C-gussets are made from 3/16 in. steel
Not Yet Reviewed
$274.99
Artec Industries patent pending 14-bolt rear Apex short axle trusses feature a stronger design, lighter weight and are much easier to install. The key feature that sets them apart from the other brands is their unique peaked-shape top which provides extra rigidity to the whole truss, while allowing both a reduction in weight (vs. using a thicker material top) and eliminating long weld seams. Previous truss versions with long weld seams can lead to extra weld warping of the axle, longer install times and can be inconsistent. Without long seams to weld, the 14-bolt rear Apex short axle trusses can be dropped directly on to the axle, and then these trusses can be welded to the axle faster. Additional part features: * Designed using 3-D models directly from Ford and Jeep for an amazing fit and clearance with surrounding components * CNC precision-cut in-house from 3/16 in. mild steel for a lightweight yet strong solution * Patent pending Apex peaked top design provides more rigidity than a flat top truss design * CNC precision bent in-house for a great fitment * Installation is simple; literally drop the truss in place on the axle and it's ready to weld, no puzzle piece assembling * 70 percent less welding needed than previous truss designs mean less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Truss is low-profile allowing link joints to be mounted with ideal geometry—about 9 in. from the axle centerline * Truss is designed to fit in between leaf springs or can be used as a base for mounting link suspension mounts * 2-piece design means smaller packaging and less shipping costs along with easy installation Important note: Requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Some grinding and fitment may be required when installing this item. Every axle varies slightly, and some fabrication may be required.
( 1 )
$219.99
Artec Industries APEX front axle trusses feature a unique peak-shaped top which provides extra rigidity to the whole truss. This allows both a reduction in weight and elimination of long weld seams which can lead to extra weld warping, longer install times, and inconsistency. This peaked structure also applies to the axle tube between the coil perches and extends underneath them, forming a complete truss from end-to-end of the axle. Despite its lighter weight (only 6 lbs.), this design has been proven to hold up to both extreme applications and daily driving. Want easy insurance that your factory Jeep axle can take more abuse than intended? Artec Industries APEX front axle truss kits provide it! Features, items, and specs: * Intended for use on vehicles with minor lifts and at least 1/2 in. bump stop extensions * CNC precision laser-cut in-house from 1/8 in. mild steel * CNC precision-bent in-house for a great fitment (drop in place on axle and it's ready to weld—no puzzle piece assembling; some grinding may be required—every axle varies slightly) * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * All long seams are bent—no need to weld them together * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and front axle disconnect (FAD) which it bridges for reinforcement; can be welded with normal MIG welder using moderate pre- and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Low-profile design allows usage in vehicles with only slight lift
Not Yet Reviewed
$120.99
—
$131.99
All Balls Racing complete 6-ball heavy-duty CV axles are designed and built as rugged OEM replacements with the current industry-standard of six ball bearings. They're engineered to handle the increasingly rough terrain and abuse you put your ATV/UTV through on a frequent basis. All Balls Racing complete 6-ball heavy-duty CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * 6-ball bearing * Chromoly steel * Stronger than OEM * 30 percent stronger than the competition * 50 percent longer lasting than the competition * High performance molybdenum grease reduces heat and friction * Precision-machined for precise OEM fitment * Black laminate coating with a gloss finish to resist rust and corrosion * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 4 )
$180.45
—
$244.10
Artec Industries JK APEX front axle trusses introduce a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry. The key feature that sets the APEX truss apart is its unique peaked shape top which provides extra rigidity to the whole truss, while allowing both a reduction in weight (vs. using a thicker material top) and eliminating long weld seams. Previous versions with long weld seams have led to extra weld warping of the axle, longer install times, and can be inconsistent. This peaked structure not only applies to the axle tube between the coil perches, but extends underneath the coil perches as well—forming a complete truss from end to end of the axle, an industry first in an OEM axle application. The JK APEX truss has been tested and proved to hold up to both extreme applications and daily driving. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift
Not Yet Reviewed
$120.99
All Balls Racing complete 8-ball extreme-duty CV axles are designed for more aggressive applications. They'll take on the rough terrain and abuse you put your ATV/UTV through on a frequent basis. These CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * Eight precision ball bearings deliver smoother operation and increased joint strength * Larger chromoly axle shaft * 35 percent larger bearing cages and races * Increased load capacity * 10 to 40 percent stronger the OE and competitor axles * Last up to 12 times longer * Precision-machined for precise OEM fitment * Black oxide coating with a matte finish that covers both joints for ultimate rust and corrosion protection * High performance molybdenum grease reduces heat and friction * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 1 )
$193.49
—
$259.30
Artec Industries JK rear axle trusses are designed to take serious abuse and reinforce your axle, while also providing a flat surface to mount your upper control arms in a 4-link setup. The 10-gauge, 1/4 in. mild steel truss tops incorporate a unique design to strengthen the axle—and provide a low-profile mounting height/surface for an aftermarket 3-link suspension system, if desired. Precision CNC-cut and bent for great fitment, Artec Industries JK rear axle trusses span the entire length between spring buckets. They're reinforced using interlocked 10-gauge thick dimpled gussets for maximum strength and easy assembly.
Not Yet Reviewed
$131.99
—
$259.99
Artec Industries APEX rear axle trusses bring a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry. Their key feature is their unique peaked shape top which provides extra rigidity to the whole truss while allowing both a reduction in weight (vs using a thicker material top) and eliminating long weld seams--which can be lead to extra weld warping of the axle, longer install times, and inconsistency. The peaked structure strengthens the area between the coil perches and over the differential forming a solid structure where its typically most weak. Artec APEX rear axle trusses are the epitome of low cost, easy and quick to weld, simple, strong, and complete solutions for making your factory Jeep axle take more abuse than originally intended. Additional features: * CNC precision laser cut in-house from 3/16 in. mild steel * CNC precision bent in-house for great fitment * Lightweight yet strong solution--less than 10 lbs. * Designed used 3D models directly from Dana Corp and Jeep * 70 percent less welding needed than previous truss designs--less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction, but rigidity and strength * Contours the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock axles * Clearance cuts for e-locker plug removal and axle breather hose * Low-profile design, tight to the differential, allows usage in vehicles with only slight lift
( 1 )
$131.99
—
$175.99
Fortify your Jeep's axle housing with Rough Country heavy-duty truss and C-gusset kits. These durable, solid-steel protective armor kits give your axle incredible strength and rigidity to withstand the weight loads associated with larger tires and aftermarket accessories. Each kit features ultra-durable steel panels that are laser-cut for an exact fit to your vehicle. Once installed, this unique armor system ensures the utmost strength to protect your axle tubes from bending even under pure off-road torture. The low-profile design is engineered to allow the maximum suspension up travel in a strong, sleek build. Also included are upper and lower C-gussets with reinforced plates and internal spines that offer incredible rigidity to the inner C knuckles on your front axle. This innovative design with internal reinforcement and wrap-around sides offer superior protection no matter what the trail dishes out. Benefits and specs: * Helps prevent axle binding * Durable 3/16 in. steel side panels * 1/4 in. steel top spine and internal gussets
Not Yet Reviewed
$119.95
Need reinforcement? Artec Industries Ford 9 in. front axle trusses support and strengthen your front-end. These uniquely designed trusses are built with 1/4 in. thick truss tops and 10-gauge thick gussets to add muscle and provide a flat link mounting surface. No matter if your 9 in. housing is slightly offset or centered, the fit is still universal--simply trim out the shape of the center section and fit them on. They are low-profile and span the entire length of the axle. Artec Industries trusses bolster your Ford 9 in. front axle with the stamina to take all off-road abuse.
Not Yet Reviewed
$219.99
What is your suspension built on? Artec Industries 8.8 in. modular axle trusses provide the supportive framework and a good foundation for success. Manufactured from precision CNC-cut and bent 1/4 in. mild steel and reinforced with interlocking 1/4 in. thick gussets, these 8.8 in. trusses beef up your axles and the link mounting surface for maximum strength. They have a low-profile design, allowing link joints to be mounted with ideal geometry—and they're shorter, so you can mate them with factory or Artec leaf spring perches. Trusses include trim-to-fit bridges that tie into a flange off the pinion of the axle and fortify the might of the whole truss. Build a system designed to take serious abuse; start with 8.8 in. modular axle trusses from Artec Industries.
( 5 )
$259.99
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$188.99
—
$265.99
SKF axle bearings are available for a wide range of applications, designs, series, and sizes. They incorporate logarithmic roller raceway profiles with an ultra-smooth surface finish for quiet operation. SKF axle bearings are designed and manufactured to the highest quality standards, ensuring long life and safety. These components meet or exceed requirements for most applications. For more than 100 years, the world's engineers, technicians, and mechanics have turned to SKF products for the best possible solutions.
( 5 )
$104.99
—
$115.99
SKF tapered roller bearing races are available for a wide range of applications and meet or exceed requirements for most applications. They incorporate logarithmic roller raceway profiles with an ultra-smooth surface finish for smooth and quiet operation. SKF products are designed and manufactured to the highest quality standards, ensuring long life and safety.
Not Yet Reviewed
$195.99
Need reinforcement? Artec Industries Ford 9 in. rear axle trusses support and strengthen your rig's rear-end. These uniquely designed trusses are built with 1/4 in. thick truss tops and 10-gauge thick gussets to add muscle and provide a flat link mounting surface. They're able to nearly fit any 9 in. housing--whether slightly offset or centered, the fit is still universal. Simply trim out the shape of the center section and fit them on. They are low-profile and span the entire length of the axle for complete fortification. Artec Industries trusses bolster your Ford 9 in. rear axle with the stamina to take all off-road abuse.
Not Yet Reviewed
$229.99
Artec Industries JL APEX front axle armor kits include everything you need to make your factory housing the strongest it can be—including an APEX front axle truss, front LCA skids, inner C-gussets, and optional JL Shield CAD skid. Order the kit recommended for your Jeep application. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 6 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and FAD (front axle disconnect) and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Bridges the front axle disconnect (FAD/CAD), shown to be one of the weakest sections of the front axle * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids and optional JL Shield are made from 1/4 in. steel * Inner C-gussets are made from 3/16 in. steel
Not Yet Reviewed
$274.99
Artec Industries JT APEX front axle armor kits include everything you need to make your factory housing the strongest it can be—including APEX front axle truss, front LCA skids, and inner C-gussets. Order the armor recommended for your Jeep application. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 6 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and FAD (front axle disconnect) and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Bridges the front axle disconnect (FAD/CAD), shown to be one of the weakest sections of the front axle * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids are made from 1/4 in. steel * Inner C-gussets are made from 3/16 in. steel
Not Yet Reviewed
$274.99
Meziere Enterprises offers a line of axle housing ends that provide the best fit and remain consistent from one part to the next. They are fully machined on all surfaces to a beautiful finish that's ready to weld onto your project. Available for several applications, these top-of-the-line Meziere housing ends offer quality, reliability, and a lot of pride for your special ride. If you need housing ends, try Meziere axle housing ends--you'll be pleased with their workmanship.
Not Yet Reviewed
$114.37
Timken Bearing offers a variety of needle roller stud-type assemblies for replacement on specific vehicle applications. These universal bearings include races, and are available in numerous bore sizes and outside diameters. Order the needle bearing assemblies tailored for fitment on your make and model. Timken is the brand you can depend on to match OE specs on ready-to-install bearings.
Not Yet Reviewed
$114.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
