Availability
Hays hydraulic release bearing feed line kits are an upgrade from your factory clutch feed line. They feature tough stainless steel braided lines with limited flex and high-quality fittings. Each fitting contains a rubber O-ring for an accurate leak-free seal. These are great for replacing stretched, cracked, or broken stock lines. Order the kit recommended for your vehicle application.
Not Yet Reviewed
$139.95
Sikky Manufacturing offers hydraulic clutch lines for a variety of applications, including numerous Nissan and BMW cars from 1984 and up. These bolt-on kits are a simple upgrade solution for plumbing your clutch system. The braided stainless steel lines include all necessary fittings and hardware for installation. Most feature a remote bleeder.
Not Yet Reviewed
$159.59
The hydraulic clutch line is responsible for transporting hydraulic fluid from your clutch master cylinder to your clutch slave cylinder—increasing fluid pressure to disengage the clutch, and decreasing pressure to engage the clutch. Holley high-flow clutch hoses serve as direct replacements for the factory originals. They allow for increased fluid capacity, and the braided steel line construction will improve clutch pedal feel—by minimizing expansion and contraction of fluid within the line that commonly occurs with most factory-style plastic/polymer lines. To make installation a snap, a roll pin and O-ring are included. Order the host recommended for your application.
Not Yet Reviewed
$105.95
HEL Performance braided stainless steel clutch lines are available for a variety of applications—including many Subaru, Nissan, and BMW vehicles from the late 1980s and up. These replacement lines feature protective PVC covers in more than a dozen color options. The hoses are manufactured to factory specifications to ensure precise fitment and long-lasting performance. Select the HEL Performance braided stainless steel clutch lines designed for your vehicle.
Not Yet Reviewed
$137.49
Summit Bucks
Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together, providing progressive pressure increases as driving conditions become more demanding. Their springs are approximately 10 percent stronger than OEM and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it's needed the most. The combination of these springs and valves in the Sonnax hydraulic line pressure booster kits gives you the best of both worlds--a modest pressure increase at the low-end, with a high-end pressure that's equal to or greater than that of other aftermarket kit springs.
( 20 )
$101.03
EBC CKF carbon fiber lined MX race clutch plate sets are built tough to last longer, grip better, feel better, and drive better than stock cork-based units. Plus, the high-heat ability of EBC CKF carbon fiber-lined MX race clutch plate sets handle much higher stresses and temperatures encountered in racing yet feel gentle and smooth in everyday riding. One day, all Motocross bikes and ATVs will be built using a clutch like this, but for now the only way to get the best clutch in the game is to step up to EBC CKF carbon fiber-lined MX race clutch plate sets.
Not Yet Reviewed
$105.80
—
$163.40
With Raybestos R-Line axle hubs, you can be assured that there are no significant differences from the original design. Offering a full line of coverage from the 1970s and up, along with great value, R-Line replacement hubs are tested to ensure and maintain safe and reliable service. Veering from the original design can cause problems. Raybestos steel axle hubs deliver proper fit and performance that makes your install hassle-free and provides peace of mind. Order the model designed for your vehicle.
( 6 )
$123.99
—
$130.99
Clearance
Raybestos R-Line wheel hub assemblies are designed to OE specifications—and tested for endurance, temperature control, hydraulic and salt resistance, as well as metallurgical integrity and vibration. This ensures Raybestos R-Line assemblies deliver a long service life with consistent performance that's quiet and safe. Order the model designed for fitment on your vehicle application.
( 20 )
$202.99
$100.99
—
$247.99
ATI Super Bands are high performance replacements for Powerglide low gear bands, which are so critical in the operation of a race transmission. These bands are completely new cores made of invest cast steel, machined totally in-house with all-new components. Providing 21 percent more clamping area than stock bands, their lining is made of heavy-duty materials to ensure high performance and longevity. They are recommended for use with all popular dual ring servos.
( 2 )
$216.99
American Autowire torque converter lockup kits allow for the installation of computer-controlled transmissions without all of the work involved to install the computer control unit. They include a pressure switch, inline fuse, and wiring harness with preterminated connectors.
( 16 )
$100.70
ATI transmission bands use the finest lining and adhesives available to ensure performance and reliability. They play an important role in transmission operations; Kevlar® lining is available for extreme-duty applications.
( 4 )
$207.99
RAM hydraulic throwout bearing travel adjustment systems are designed for late model vehicles equipped with internal slave cylinder and bearings. Factory hydraulic systems do not allow for adjustment of the pedal position, often resulting in a high engagement point when using aftermarket clutches. The Ram system allows you to adjust your pedal position lower to the floor for better driver comfort, while allowing you to minimize the release of your clutch system for racing applications. Some vehicles experience shifting problems at higher RPM due to over centering, or over travel of the clutch fingers. By limiting this travel and setting the clutch pedal for minimum release this over travel situation can be eliminated, restoring clean shifts at high RPM.
( 12 )
$198.00
Hybrid Racing offers clutch master cylinders for a variety of applications, including select Honda© and Acura© cars from 1992 and up. These OEM-quality replacements are popular upgrades because of their fit and performance. Built from aluminum, some models feature a remote reservoir, while others include an attached reservoir. Select the design recommended for your vehicle.
Not Yet Reviewed
$154.84
—
$208.99
These Biondo CO2 bottle kits include an empty CO2 bottle, line, fittings, and a regulator. An air line is included.
( 9 )
$189.99
—
$219.99
Keep the pressure down with Biondo air shifter regulators. With a Biondi regulator attached to your CO2 bottle, your shifter system will operate at the proper pressure and you'll get more shifts per bottle. Keep control of your race car's performance by monitoring bottle and line pressure. They also work great for regulating supplied air for throttle stops. Biondo air shifter regulators are available in single preset or adjustable dual gauge set-ups.
( 5 )
$102.99
—
$189.99
Chevrolet Performance offers clutch master cylinder and actuators for a wide range of vehicles. Your master cylinder sends fluid to the clutch actuator (slave) cylinder, which pushes the fork that engages the clutch. Failure to replace it when needed can damage other components. These quality-built Chevrolet Performance OE replacement clutch master cylinder and actuator assemblies will provide the perfect fit and performance to renew your clutch's positive feel. Order the model recommended for your application.
( 13 )
$225.99
—
$234.99
Perfection Clutch offers a variety of hydraulics for your clutch system, including cables, master and slave cylinder kits, and more. The replacement parts are available for a variety of applications from 1986 and up. Order the component or kit needed to service your vehicle.
Not Yet Reviewed
$131.99
Biondo CO2 bottles are high quality bottles made of an aluminum construction for long lasting performance. Biondo CO2 bottles and include a valve, making them perfect for a long day at the track.
( 6 )
$219.99
—
$229.99
Summit Bucks
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 11 )
$113.40
—
$235.14
Summit Racing™ offers a complete line of manual transmission parts—including these quality manual transmission bellhousings that feature all-new CNC-machined castings for tight tolerances and a precision fit. Our Summit Racing™ bellhousings are designed to help eliminate flexing, true up clutch alignment, and decrease wear on internal transmission components. They're available for a wide range of Chevy and GMC applications from the 1950s and up.
( 6 )
$145.99
—
$189.99
On Sale
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 98 )
$192.99
$105.99
—
$228.99
RAM hydraulic release bearings offer maximum flexibility when setting up the clutch release system in your early or late model car or truck. RAM heavy-duty hydraulic bearings use larger, more robust O-rings, providing the ultimate in durability and long life when compared to factory and other aftermarket hydraulic systems. RAM hydraulic bearings are fully adjustable and are easy to set up with most aftermarket clutches, single or dual disc. RAM hydraulic bearings are also a great choice for use in your Tremec transmission conversion. Application specific bearing kits include every fitting, line, shim and adapter needed to connect directly to the factory master cylinder. RAM also offers other bearing styles with a wider 3.150 in. bearing face needed for 3 and 6 lever clutch applications. When only the best will do, choose RAM!
( 75 )
$129.00
—
$249.00
On Sale
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 188 )
$131.95
$117.85
—
$135.95
FTI Performance transmission bands will renew the efficiency of your automatic transmission. These steel straps are lined with varying friction materials—red race material, extreme race material, or Kevlar® to stop and hold the drum for slip-free performance. Choose the model best suited for your application, then close the gap on worn-out transmission bands with quality replacements from FTI Performance.
( 2 )
$139.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
