Availability
RAM slave cylinders offer consistent engagement of your clutch, time and time again. When you're looking for replacement clutch parts, RAM has you covered.
( 1 )
$169.00
Clearance
FAG USA wheel bearing and hub assemblies are compact, lightweight, maintenance-free hubs. They combine the cost-effectiveness and proven performance characteristics of other bearings with the convenience of an integral mounting flange for mounting brake, disc, and wheel. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearing and hub assemblies, available for hundreds of applications.
( 11 )
$113.99
—
$228.99
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 87 )
$124.99
—
$194.99
Raybestos R-Line wheel hub assemblies are designed to OE specifications—and tested for endurance, temperature control, hydraulic and salt resistance, as well as metallurgical integrity and vibration. This ensures Raybestos R-Line assemblies deliver a long service life with consistent performance that's quiet and safe. Order the model designed for fitment on your vehicle application.
( 20 )
$109.99
—
$116.99
Renthal R3-3 MX SRS O-ring drive chains challenge the extreme rigors of off-road use and win! These R3-3 chains are fitted with nitrile O-rings that retain special vacuum-injected grease inside of the chain joint to extend chain life. These Renthal O-ring chains come with both an easy-fit split link and a superior solid pin rivet link. They feature shot-peened alloy steel side plates that provide high tensile strength and maximum impact load resistance, high-carbon alloy steel bearing pins, and gold-colored side plates that offer corrosion and wear resistance. Link your bike to chains that can handle the stress--Renthal R3-3 MX SRS O-ring drive chains.
Not Yet Reviewed
$140.36
—
$143.96
Mopar Replacement offers front and rear driveshaft coupler packages for a variety of applications, including Chrysler 300 and Dodge Charger and Challenger models. Shaft couplings connect the driveshaft and driven shaft of a motor in order to transmit power. They introduce mechanical flexibility, providing tolerance for shaft misalignment. If your vehicle is experiencing excessive noise and/or vibration, premature mechanical seal and bearing failure, or increased power consumption, worn or faulty driveshaft couplers may be the cause. Order the kit recommended for your ride.
Not Yet Reviewed
$169.99
Chevrolet Performance offers wheel bearing and hub assemblies for hundreds of applications—including vehicles from Chevy, GMC, and Hummer. These steel hubs include the wheel studs (unless otherwise noted), and are strong replacements for vehicles that face challenges off-road as well as in the urban jungle. Renew your handling and suspension; order the assemblies recommended for fitment on your ride.
Not Yet Reviewed
$140.99
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 163 )
$255.00
—
$275.00
Lokar Hi-Tech kickdown kits are made with an extruded liner for extended life--and are available in either stainless steel braided housing, black stainless steel braided housing, or black housing. They feature matching aluminum fittings and ferrules to help eliminate frayed ends and are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the Lokar Hi-Tech kickdown kit designed for your transmission application.
( 465 )
$128.95
—
$170.90
BMR cradle bushing lockout kits reduce wheel hop, deflection, and cradle movement—with virtually no change in NVH. They're specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum "bullet" inserts. The kits are finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. These bolt-on kits use existing holes and hardware, allowing for easy installation with simple hand tools. Choose the model designed for fitment with your vehicle. When subframe performance is a must, rely on BMR Suspension!
( 7 )
$299.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$231.95
—
$245.95
McLeod 1200 Series hydraulic throwout bearings restore firm, positive shifts. These direct-fit OE-replacement clutch slave cylinders feature a factory style wire-clip connector, and are made to the original factory specifications—with premium quality rubber components for compatibility with all DOT 3 and 4 brake fluids. Improve the shifting in your manual ride with McLeod 1200 Series hydraulic throwout bearings. Order the model designed for your vehicle application.
( 14 )
$178.50
Richmond Gear complete ring and pinion installation kits include Grade 8 ring gear bolts, bearings, seals, shims, marking compound, thread-locking compound, and silicone sealer. To ensure proper fitment, order the kit designed for your make/model application.
( 212 )
$161.99
—
$210.99
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 337 )
$117.19
—
$163.95
The Right Stuff axle bearings are made from top-quality materials to original specs, so you can be sure that you are getting a quality product. They are available for a variety of axle models, so they're sure to have your vehicle covered. Don't take a chance on used bearings--replace the old ones with a set of The Right Stuff axle bearings.
( 13 )
$132.99
Lokar Midnight Series stainless steel Hi-Tech kickdown kits have PTFE-lined cables, which are made with an extruded liner for extended life. They feature black anodized aluminum fittings and ferrules to eliminate frayed ends and a black stainless steel braided cable jacket. The kits are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the model recommended for your transmission application.
( 37 )
$142.95
Motive Gear offers axle bearing and seal kits for a variety of applications—including Dana 60, Chrysler 9.25 in., Ford 8.8 in., and Ford 9.75 in. differential case design types. These replacements are manufactured from factory-grade materials and machined to OE specs to ensure proper fit and long-lasting performance. Maintain your drivetrain with components from an industry leader whose products are found in the winner's circle at racing events worldwide.
( 1 )
$157.99
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 240 )
$125.99
—
$243.99
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 340 )
$121.99
—
$242.99
Dorman transmission pans are the perfect OE replacements for those rust-prone parts. Some things just don't last forever. So, when it's time to replace your transmission pan, look to Dorman for the qualities, fit, and function you need to keep your vehicle on the road. Check and service your parts often and replace them with Dorman.
( 88 )
$176.95
—
$185.95
McLeod makes quality performance pressure plates for a wide variety of vehicles--domestic, imported, new, classic, you name it. They manufacture diaphragm, Borg & Beck, and Long types, with both aluminum and ductile-iron pressure rings. Not only that, they have applications designed for drag racing, road racing, oval tracks, and even the fabled dry lakes and salt flats of California, Nevada, and Utah. Chances are, they have what you need!
( 7 )
$195.00
—
$235.00
Centerforce Performance clutch discs will work with both Centerforce I and II pressure plates. Most of them have a carbon-composite organic friction material for longevity and drivability, as well as positive engagements and excellent heat capacity. These clutch discs are designed to withstand the loadings from high-horsepower engines, but are priced for the everyday driver as well.
( 53 )
$178.95
Clearance
Historically, the core business of LuK—an abbreviation that, in English, stands for disc and clutch makers--is clutches, their associated systems, and powertrain dampers. LuK clutch slave cylinders have a long operating life and low-friction characteristics, thanks to the special design of the central seal, with a plastic reinforcement and the use of special lubricants. LuK offers both hydraulic concentric slave cylinders fitted within the bellhousing and external slave cylinders for lever-operated throwout bearings. All automatically adjust for clutch wear.
( 58 )
$213.99
On Sale
B&M NAG-1 locking transmission dipsticks are designed to allow for a quick and easy check of the automatic transmission fluid level and quality by the vehicle owner, without having to go to the dealership. They're constructed of billet steel and black mil-spec anodized aluminum 6061-T6. The dipsticks allow for both cold and warm fluid level checks and are meant to be left in the vehicle and locked into place. B&M NAG-1 locking transmission dipsticks feature an engraved B&M logo, a locking knurled handle cap, and a temperature range engraved indicator end.
( 21 )
$123.95
$111.55
—
$131.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
