Availability
Showing In Stock Items. Show All 85 Items.
ATI TH400 upgraded center supports feature a bronze bushing that virtually eliminates premature sprag failure. They are highly recommended for competition applications. These supports are also available with a PTFE coating for aluminum drums.
( 2 )
$169.00
ATS Diesel Performance transmission case brace support brackets are external 2-piece girdles used to help eliminate 68RFE and 545RFE cracked case failures. These steel supports weigh 8 lbs. and are 17 in. long x 13 in. wide x 8 in. tall. Keep your transmission case intact with an ATS Diesel Performance transmission case brace support bracket.
Not Yet Reviewed
$195.00
These TCI governor supports are designed to boost the efficiency of your transmission by reducing power-robbing friction. They are manufactured from high-quality, durable aluminum and include the bearing to complete installation. Improve reliability and optimize efficiency with one of these TCI governor supports.
Not Yet Reviewed
$120.95
Replacing the center support bearing should resolve the problem of a clunking sound in the drivetrain. Spicer Drivetrain bearings will hold good and tight, keeping the driveshaft in place. If the rubber in your old bearings is worn-out, it will allow too much deflection in the shaft—causing vibration that will worsen as the movement increases. Spicer craftsmanship means you get longer bearing life and less downtime, as well as complete interchangeability with existing parts.
( 26 )
$100.99
—
$196.99
These Dorman driveshaft center support bearings are made of a high-quality black rubber material. Dorman has been producing high-quality replacement parts since 1918 with state-of-the-art equipment. Dorman has you covered for all your driveshaft center support bearing needs.
( 19 )
$100.99
—
$187.99
PEM Racing's Ford 9 in. center housings are designed to provide a robust and durable foundation for high-performance rear-end applications, particularly in racing and modified vehicles. These housings are engineered to withstand the stresses of increased horsepower and torque, offering a stronger and more reliable base for the 9-inch differential. The PEM Racing HNF9 center housings are designed as an OEM replacement but also allows for customization with various axle tubes and carriers. This flexibility allows users to tailor their rear-end setup to specific needs and applications.
Not Yet Reviewed
$264.99
If you are having some squeaky sounds coming from your driveshaft, Inland Empire Driveline stock replacement center support bearings may be the answer. Prevent driveshaft failure that affects engine performance. Bearings are just simple, round objects that provide stability by supporting the driveshaft as it spins underneath your car and keeps it in its axis. If your bearings are chipped or cracked, replace them with Inland Empire Driveline center support bearings.
Not Yet Reviewed
$163.41
It's important to keep your driveshaft secure. Beck/Arnley driveshaft center support bearings will replace your worn-out factory components. They are matched identically to OE form, fit, and function. These bearings are sealed to provide long life and zero maintenance. The rubber mounting allows support while remaining flexible. These Beck/Arnley center support bearings will restore proper driveshaft alignment and improve driveshaft performance.
( 5 )
$100.99
—
$125.99
Inland Empire Driveline super strength bearing supports are manufactured from 7075-T6 aluminum and are designed to withstand the stress of high horsepower drivetrains. They feature a polyurethane cushion that absorbs the shock of high torque acceleration and help to deliver power in a smooth manner under extreme conditions.
( 29 )
$171.77
Lokar Clayton Machine Works gated automatic transmission shifters are available in a floor mount configuration for most GM, Ford, and Chrysler transmissions. Available in several lever lengths, each part is designed with attention to details, implementing modern design elements and finishes to provide function and style that blends with any vehicle. Features include: * Available in floor mount only, can be converted to cable operation with optional conversion kit * Gated style, side shift detent pattern allows for unlimited knob options * Innovative lever design allows for easy removal and 360-degree rotation * Options available for mounting Tremec style levers * Durable coated bracketry * Neutral safety switch
( 8 )
$235.95
—
$256.95
Don't sacrifice quality for savings, get both with SVL Drivetrain driveshaft support bearings. These bearings are engineered to provide the proper fit, alignment, and support for your specific application needs. High-quality steel provides reliable strength to the center support frame, while the rubber materials absorb and isolate the vibrations that can damage the driveline. SVL Drivetrain driveshaft support bearings are pre-lubed and sealed for life, preventing contaminants from entering, and a corrosion-resistant coating adds extra protection. SVL Drivetrain driveshaft support bearings are manufactured in certified factories to ensure consistent product quality. That means you'll get the alignment you need as well as assurance that you're getting great product performance for your money.
Not Yet Reviewed
$103.99
Age, miles, and abuse take their toll on drivetrain parts, making rebuilds and new parts a necessity. When you're seeking direct replacements for OEM, you need Spicer Drivetrain Products slip yokes. Spicer products are used in the production of many vehicles and are well-respected for quality, innovation, and value. These slip yokes are produced with the same high standards as the originals for reliable service. When rebuilding a transmission, use the parts that made it great. Go with Spicer Drivetrain Products slip yokes.
( 126 )
$156.99
Noram offers Stinger clutches for a variety of karting applications. They are 4-cycle clutches with a 3/4 in. bore, for running inboard or outboard. Stingers are available with a billet or stamped drum; different tooth quantities; and different chain sizes. Notes: * Billet drums may not be legal in series running the Briggs Racing LO206 U.S rule set. * Stamped drum required by 206 Briggs & Stratton rule set.
( 2 )
$144.99
—
$183.99
Noram offers Star clutches for a variety of karting applications. They are 1 in. counterbore clutches for 4-cycle engines up to 18 hp. Available in different tooth quantities, Star clutches were approved and designed exclusively for the Tecumseh Star engine.
Not Yet Reviewed
$237.99
Noram offers Cheetah clutches for a variety of karting applications. They are 4-cycle, 2-disc clutches with a 3/4 in. bore. The #35 chain Cheetah clutches come complete with a 15-tooth sprocket. Product features: * Removable sprocket saves you time and money * Precision-machined pressure plate gives more consistent engagement * Copper discs with superior linings provide excellent engagement and lock-up * Easy-to-adjust engagement springs
( 1 )
$268.99
Noram offers GE Ultimate clutches for a variety of karting applications. They are 4-cycle clutches with a 3/4 in. bore, to run inboard or outboard. Models are available to run with #35 or #219 chain. Product details: * Stamped drum with venting holes for max airflow and cooling * Alternate shoe configurations conform to unique driving skills * Variable torque settings dramatically decrease slippage * Replaceable sprockets eliminate frequent drum replacement * Thrust bearings for an exceptionally smooth performance * High tech linings provide maximum coefficient of friction * Light shoe type
Not Yet Reviewed
$126.99
—
$135.99
Noram offers GE clutches for a variety of karting applications. They are 4-cycle clutches with 3/4 in. bores, to run inboard or outboard. The clutches are available in different tooth counts for #35 or #219 chain size, with heavy or light shoes. Additional features: * Stamped drum provides stable and consistent run out * Long-lasting heat-treated shoes * Variety of settings to fine-tune to track layouts * Flexibility of engagement with variety of springs * Economical maintenance
Not Yet Reviewed
$142.99
—
$144.99
Noram offers Titan World Formula clutches for a variety of karting applications. They are 4-cycle clutches with a 3/4 in. bore—and feature interchangeable sprockets on a machined drum, the ultimate in strength and alignment. Titans are available in different tooth quantities. Additional notes: * Run inboard or outboard * Unique hub and shoe design for max power transmission * Shoe/spring/hub cartridge for quick and easy setup changes
Not Yet Reviewed
$210.99
—
$215.99
Noram 1600 Series clutches are designed for more horesepower engines—and eliminate the need for oversizing electric motors to reach starting torque requirements. Designed for 3-15 hp engines, the clutches are available in different tooth counts, for different chains, and for inboard or outboard. Order the model best suited for your application.
Not Yet Reviewed
$228.99
The PRW Black Label Torq'r Series flexplates provide a moderately-priced alternative that exceeds performance of OEM and many aftermarket replacement alternatives. Constructed from cold-rolled premium steel with a long-lasting finish that helps prevent rust, they are thicker than stock, and are available with or without one-piece forged ring gears. They are also lighter for quicker throttle response, and SFI 29.1 approved and compatible with manufacturers specifications, but offer added strength whether used for racing, towing, off-road or other severe duty conditions. The diesel applications conform to SFI standards and include added benefits that performance builders will come to appreciate. Order the model recommended for your specific vehicle and engine size.
Not Yet Reviewed
$206.57
Lokar's AxiShift bolt-on shift lever adapters put a new spin on precisely positioning your shifter lever. They allow your shifter lever to be rotated 360 degrees and tilted 15 degrees in any direction to find the perfect position. The high-strength steel AxiShift bolts onto your Tremec TKO 500 and 600, T56 Magnum, or any manual transmission with a 7/8 in. shift lever center-to-center mounting dimension.
( 4 )
$132.95
B&M flexplates are tough enough to handle severe applications and are ideal for 6,000+ rpm usage. They have precision-stamped centers and a rust-resistant, gold iridited finish. Some units are SFI-approved and are NHRA/IHRA-legal for all classes.
( 176 )
$169.95
—
$230.95
Summit Racing™ billet shifter levers are direct bolt-on sticks for Tremec and Borg Warner manual transmissions as well as Summit Racing™ automatic shifters utilizing a 7/8 in. center-to-center 2-bolt mounting flange. These machined billet aluminum and anodized levers will give any center console that clean, smooth appearance. Levers also include a billet shift knob with 3/8 in.-16 thread.
Not Yet Reviewed
$173.99
Summit Racing™ floor mount automatic transmission shifters are designed and manufactured with superior craftsmanship. The floor mount bracket allows for installation above or below the floor on the transmission tunnel. These shifters feature a gated shift pattern with side shift detent for easy shifting. The standard 7/8 in. center to center 2-bolt flange allows for easy removal and use of most lever designs. Removal of the transmission is not necessary, making installation a breeze. Get the quality and performance you're looking for with one of these floor mount automatic shifters.
( 20 )
$272.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
