Availability
Showing In Stock Items. Show All 8 Items.
Strange pinion depth shims allow you to seat your pinion gear perfectly. They're made of durable steel to withstand years of use and abuse. Strange Engineering offers these shims in a variety of thicknesses to custom-fit your axle model application. Installing gears is made easier with a set of Strange pinion depth shims.
( 4 )
$19.99
Summit Bucks
Sticking of bypass components, spring relaxation, or poor ball seat in Ford 4R100 and E4OD units will allow the bypass to open at lower cracking pressure. This reduces TCC (Torque Converter Clutch) apply pressure, cooler flow at the overdrive section, and radiator flow responsible for heat transfer. Sonnax automatic transmission cooler bypass valve kits allow the bypass valve assembly to be rebuilt, salvaging the OE fittings and maintaining cracking pressure at 70 to 75 psi. Features: * Hardened steel T-valve provides secure check ball seat and adequate bypass flow * New spring cracks open at 70 to 75 psi to provide lube if cooler is blocked or restricted * Hardened alloy steel check ball resists damage * Seven new O-rings provide positive seal for cooler circuit * Drop-in Zip Valve parts install quickly and easily Contents: * T-valve * Spring * Check ball * O-rings -- One small -- Two medium -- Two large -- Two extra-large
( 1 )
$16.74
Summit Bucks
Sonnax pressure switch rebuild kits allow you to salvage the expensive transmission electro-hydraulic control module (TEHCM). The required Sonnax installation tool kits make the rebuild quick and easy, seating the laminate discs and setting the seals in place. Contents of each kit: * Laminate installation tool * Seal installer * Piston * Seal plunger
Not Yet Reviewed
$18.99
Yukon Gear & Axle pinion shims help seat your pinion gear properly. These steel inner and outer pinion shims assist you in setting up the right depth and preload for your application. If you need pinion shims, Yukon Gear & Axle offer quality and value.
( 19 )
$18.99
—
$20.99
Extend the "cool" of your classic with United Pacific shifter shaft extensions. These extenders will add to the layback styling of your shifter stick with chromed steel or awesome skull graphics. The 3/4 in. diameter shafts thread-on and are available in different lengths. Whether you need to rise above your bench seat or just like nostalgia, lengthen the shifter shaft in your off-road or show vehicle with United Pacific shifter shaft extensions.
( 7 )
$16.99
—
$22.99
TransGo Performance offers a variety of automatic transmission rebuild components—including pressure regulator valves for hundreds of applications, such as cars, trucks, and vans from Pontiac, BMW, Chevrolet, GMC, Hummer, Cadillac, Saturn, Oldsmobile, Daewoo, Saab, Isuzu, Buick, Avanti from the 1990s and up. These drop-in replacement valves correct, prevent, and reduce pressure rise shift quality issues. The pressure regulator valves are available individually or in kits with different rebuild parts (see details in Notes). Order the model recommended for your transmission and/or vehicle.
( 1 )
$20.07
Summit Bucks
The detent ball in the valve body in listed Chrysler automatic transmissions (see Applications tab) wears into the aluminum bore due to continuous movement and vibration of the linkage. This creates excessive looseness in the manual valve lever and allows the manual valve to move out of alignment. No start or being stuck in Park can occur from the manual valve being out of position due to extra clearance. This condition often requires that the valve body be replaced. Sonnax valve body detent ball and sleeve kits allow the valve body to be salvaged. The bore must be oversized using the self-guiding bench reamer included in Sonnax tool kit 22771-TL12. A .096 in. diameter drill bit is also included to allow the retaining pin hole to be redrilled for use with the OE pin. Sonnax detent spring 22771-36 is also available. Additional notes: * Precision steel sleeve restores worn valve body and properly supports the detent ball * Precision-ground steel ball included for optimal fit with the replacement sleeve * Self-guiding bench-style reamer allows casting to be oversized quickly and accurately without specialized equipment * Kit is designed to fit both the short and long OE detent bore designs
Not Yet Reviewed
$16.80
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
