Availability
Showing In Stock Items. Show All 191 Items.
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$833.00
—
$1,204.00
Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.
( 12 )
$170.03
—
$438.35
Exedy offers OE flywheels for a variety of applications, including many Honda©, Acura©, Subaru, Scion models from early 2000s and up. Flywheel hot spots can cause chatter—and resurfacing a flywheel doesn't always remove hot spots. The flywheel may appear fine, but the hot spots will often still be there. These stock replacements are machined from ductile iron in different sizes and configurations. They smooth the power output in reciprocating engines, store and deliver energy at higher rates than the source, and control the orientation of a mechanical system using gyroscope and reaction wheel. It's often recommended to replace both the flywheel and clutch at the same time. Order the flywheel designed for your vehicle.
( 1 )
$179.98
Competition Clutch offers Stage 2 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. The kits provide up to 80 percent increase in torque capacity and are properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. State 2 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with anti-burst steel-backed Brass Plus facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.
Not Yet Reviewed
$495.00
—
$725.00
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 2 clutch kits for street and occasional track use offer a 110 percent increased holding capacity. They utilize reinforced steel-backed full face Kevlar® friction material and feature a single diaphragm heavy-duty pressure plate, while maintaining an OEM-like pedal feel, super smooth engagement, and heat dissipation. These kits are engineered for vehicles that have basic bolt-on cars or NA vehicles with headwork, such as cams, very low boost or nitrous setup. These fibers have a low static to dynamic friction coefficient, making them an ideal choice for applications where smooth engagement is essential (e.g. daily driving, stop-and-go, off-road driving). Due to the properties of Kevlar®, the stage 2 kits have an exceptional lifespan with minimal increase in pedal feel and a more confidence inspiring engagement. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement
Not Yet Reviewed
$467.46
—
$907.59
Competition Clutch offers stock clutch kits for a variety of applications, including select Mazda, Subaru, Toyota, Lexus, Pontiac, Mitsubishi, Infiniti, Nissan, Honda©, and Acura© models from 1985 and up. These OE-style clutch replacements are the economical solution for cars that are stock or have basic bolt-ons. They provide a stock torque capacity rating and maintain stock pedal feel. Break-In Procedure: After you install your new Competition Clutch, you'll want to make sure that the clutch is properly broken in for ultimate operation. To break in your clutch, shift as often as possible during the first 500 miles, by doing so you'll ensure that the material from the disc is embedded into the friction surfaces of the pressure plate and flywheel. Following the break-in procedure will deliver the longest possible clutch lifespan.
Not Yet Reviewed
$450.00
—
$595.00
These Driveshaft Shop Level 5 axle systems have been the most copied drivetrain components for front wheel drive cars to date because they work great and are very affordable. The bar has been raised for these Level 5 axles. They use the 1.4 O.D. outer CVs from the Level 6 systems, and have made the center bar larger by changing from 1 in. to 1.125 in. (now 34-tooth). They also feature a redesigned inner CV with an even larger tripod design. These systems are made to handle up to 800 hp and 28 in. tires.
Not Yet Reviewed
$524.98
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 53 )
$118.99
—
$148.99
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 1 clutch kits for street and occasional track use offer a 70 percent increased holding capacity. They utilize reinforced steel-backed copper Kevlar® organic friction material and feature a single diaphragm heavy-duty pressure plate, while maintaining an OEM-like pedal feel and a smooth engagement. These kits are engineered for vehicles that range from stock to basic bolt-on cars, and like all Action Clutch sprung kits, the Stage 1s feature fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine. After assembly, each kit goes through multiple quality checks to ensure quality. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement
( 2 )
$497.21
—
$841.46
Competition Clutch steel flywheels are made of 4140 forged steel and are one-piece designs, which helps significantly in reducing the chances of ring gear separation and friction surface warpage. Forged steel flywheels work with all performance and stock clutch assemblies, and can be resurfaced. Competition Clutch lightweight steel flywheels are recommended for naturally aspirated and/or street driven applications. They preserve low-end torque and drivability, and are well suited for Gravity, Stage 1, and Stage 2 clutch applications.
Not Yet Reviewed
$325.00
—
$395.00
Dorman automatic transmission torque converter lock-up solenoids are engineered to precise specifications and designed to match the fit and function of the original equipment solenoid on specified Subaru vehicles. On certain Subaru vehicles, when varnish buildup or a short circuit causes the torque converter clutch solenoid to fail, the dealership requires replacing the entire valve body assembly. This Dorman OE FIX automatic transmission torque converter lock-up solenoid allows replacement of just the solenoid, instead of the entire valve body assembly, saving you a significant expense.
Not Yet Reviewed
$57.99
BCA Bearing by NTN wheel bearing and hub assemblies are premium OE-quality units with application-specific design and engineering for reduced noise, vibration, and harshness, as well as extended life. BCA Bearing by NTN wheel bearing and hub assemblies will include one of their superior Gen 1, Gen 2, and Gen 3 hubs—high-quality wheel end replacement parts for domestic and import vehicles.
( 10 )
$148.99
—
$182.99
Clearance
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 87 )
$84.99
$38.50
—
$151.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 219 )
$49.50
—
$109.99
ACT Performance clutch discs provide quicker engagement with quiet operation. These performance discs are built with premium organic material with increased friction and high copper content for better heat transfer—and steel-backed linings for a greater burst of strength and durability. For faster shift action, ACT clutch discs are modified with reduced marcel, and the heavy-duty center hub springs help keep action smooth. ACT Performance clutch discs afford you quality and value that will outlast and outperform the competition. Order the model designed for your vehicle application.
( 2 )
$179.00
—
$181.00
Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and race applications, Action Clutch chromoly flywheels offer three major benefits: Low weight, low inertia, and high thermal capacity. Made from durable one-piece billet chromoly steel or chromoly steel forgings, they are specifically made for light- to high-tuned racing cars that see drag racing, drifting, autocross, street use, and rally events, and specifically designed for a reduction in weight and inertia for better engine response. Each flywheel has gone through—and passed--engineering tests up to 15,000 to18,000 rpms, and are heat treated for extreme durability, saving you money by resurfacing multiple times.
( 1 )
$339.96
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$127.99
—
$1,023.99
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 322 )
$310.99
—
$744.95
TransGo automatic transmission reprogramming kits are designed with performance in mind. Most, but not all models contain additional features like Gear Command that allows you to hold manual low to any speed, and shift back to low at any speed. They are great for strip cars or 4x4 rock crawlers needing to select low and not have it upshift. Most TransGo automatic transmission reprogramming kits can be tuned for HD (Heavy Duty) use by following the recommendations in the kits.
( 40 )
$250.66
LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance. Manufactured to OE specifications, pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing, offering a smooth, flat surface crucial for proper clutch operation. They are engineered and built with quality materials for a longer service life. Select the disc diameter and ring gear tooth quantity needed for your application.
( 123 )
$97.99
—
$291.99
Pro Series flywheel bolts from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register.
( 371 )
$54.99
Clearance
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 156 )
$34.99
Sikky Manufacturing BRZ/FR-S T56 clutch master cylinder adapter kits offer a simple solution for clutch hydraulics on the LS1 swapped BRZ/FRS/GT86. These bolt-on conversion kits will take all the headaches out of bleeding your T56 clutch system. Everything needed is included. Order the model recommended for your vehicle. Additional details: * CAD/CAM-designed CNC billet aluminum adapter plate * Wilwood 3/4 in. master cylinder * All needed stainless braided lines * Sikky adapter fitting that threads into factory GM slave cylinder without modification * Bleeder line and custom bracket * All necessary hardware and fittings
Not Yet Reviewed
$319.19
ACT Mod-Twin 225 heavy-duty twin-disc street clutch kits are designed to tackle aggressive launches and rapid shifting of high powered AWD's—by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a more consistent light pedal feel. The puck-style friction plates, with high-quality organic materials, deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. Clutch kits are available in different styles and other options for fitment on countless vehicles from the early 2000s and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or unsprung mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.
Not Yet Reviewed
$1,984.00
—
$2,047.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
