MITSUBISHI ECLIPSE Transmission & Drivetrain - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $125 at Summit Racing

Timken Differential Bearings

Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.

4.36 out of 5 stars ( 50 )

$48.99

South Bend Clutch Stage 1 Heavy-Duty Clutch Kits

Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.

4.82 out of 5 stars ( 17 )

$240.90

—

$960.98

South Bend Clutch Stage 2 Daily Driver Clutch Kits

South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.

3.17 out of 5 stars ( 6 )

$292.98

—

$915.72

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$564.08

—

$1,256.55

ACT Throwout Bearings

ACT throwout bearings are the same high-quality bearings included in your ACT clutch kits. They are available separately for every kit made by Advanced Clutch Technology and are perfect for replacing lost or damaged bearings.

4.27 out of 5 stars ( 11 )

$86.00

—

$96.00

Timken Wheel Bearings

Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.

4.71 out of 5 stars ( 268 )

$12.99

XClutch Stage 1 Clutch Kits

XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.

3.6 out of 5 stars ( 5 )

$237.35

—

$358.79

ATP Automatic Transmission Inline Filter Kits

ATP automatic transmission inline filter kits will keep your transmission fluid clean. Foreign particles can cause premature transmission wear. These quality inline filters will do the job and are easy to install. Kits include hoses, clamps, and instructions. Sift out the bad and keep your transmission happy with inline filters from ATP.

4.25 out of 5 stars ( 12 )

$24.99

—

$28.99

National Bearing Wheel Bearings

These National Bearing wheel bearings are designed for use with your OEM or aftermarket brake rotors. Their steel roller bearing configuration allows for maximum performance without sacrificing durability.

4.54 out of 5 stars ( 24 )

$12.99

—

$30.99

ACT Race Clutch Discs

ACT race clutch discs are available in three distinct styles--choose the options that best suit your application. Spring-centered discs are the most popular and feature reduced driveline shock and spline wear with quieter operation. Rigid-hub versions offer improved durability but increase gear noise and spline wear. For either of those hub designs, you can choose six pads for better heat management and engagement, or four pads for the quickest shifting. Sintered iron discs offer the highest torque capacity and ultra-high heat capacity. They're designed for cars using clutch-less shifting or drag racing transmissions. Additional product details: * Premium ceramic friction materials provide high-heat tolerance, high coefficient of friction, and low wear rates * Carefully broached splines provide exact fit onto the transmission input shaft for long spline life and better clutch release * Heavy-duty torsional dampening springs are provided in the best sizes and spring rates to help reduce noise * Drive plates are made of high-carbon steel; heat-treated and black zinc coated to resist bending, cracking, fatigue, and rusting * Certified to SFI specifications

4.57 out of 5 stars ( 23 )

$147.00

—

$232.00

XClutch Stage 2 Clutch Kits

XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.

Not Yet Reviewed

$592.05

—

$2,181.91

Clearance

WIX Filters Transmission Filters

WIX transmission filters protect automatic transmissions against contaminants in the transmission fluid. Proper filtration helps improve transmission life by minimizing wear and preventing sticking and scoring of sensitive shift control valves. In the event of a part failure, WIX transmission filters also guard against secondary damage to other parts, possibly minimizing additional repair costs. Order the replacement model designed for fitment with your vehicle application.

4.46 out of 5 stars ( 122 )

$7.99

Clearance

Dorman CV Joint Boots

Dorman CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. Pick up one of these Dorman CV joint boots to eliminate the problem.

1.67 out of 5 stars ( 3 )

$23.99

Centerforce Dual Friction Clutch Kits

Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.

4.67 out of 5 stars ( 314 )

$346.95

ACT Streetlite Xact Flywheels

ACT Streetlite Xact flywheels are designed to provide significantly improved engine response and acceleration at an affordable price. Order the model designed for your vehicle application. Features: * Lighter and stronger than OE flywheels * Better drivability and durability * Recommended for street use and drag racing * Designed using the latest CAD and Finite Element Analysis software * CNC-machined and dynamically computer-balanced for smooth operation at extremely high rpm * Entire forgings are heat-treated for strength and toughness * Tight tolerances for fit, concentricity, and parallelism * Adequate material behind the friction surface for excellent heat capacity * One-piece construction for reduced failure and uniform, efficient heat transfer—no more warped inserts * Integral ring gears are induction-hardened for longer gear life and weight reduction where it matters most—eliminates gear breakage or separation * Ring gears are cut with lead-in chamfers for better starter engagement and to prevent rounding-off gear teeth * SFI-certified

4.94 out of 5 stars ( 36 )

$340.00

ACT Heavy-Duty Pressure Plates

ACT heavy-duty pressure plates feature induction-hardened diaphragms to reduce wear and promote smooth operation. They utilize stronger drive straps and rivets to strengthen the pressure plate and prevent breakage. All castings are CNC-machined for greater consistency and precision. Step up your race and street game; order the ACT heavy-duty pressure plates recommended for your vehicle. Some of their many features include: * Most popular choice * 20 to 50 percent clamp load increase * Computer spin-balanced * Stiffening ribs * Pedal feel is stock to moderate * SFI-certified * Recommended disc: Street/Race

4.9 out of 5 stars ( 10 )

$273.00

—

$475.00

National Bearing Differential Bearings

Make sure that the job is done right with National Bearing differential carrier bearings. You can trust National Bearing to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to National Bearing's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.

3.4 out of 5 stars ( 5 )

$14.99

South Bend Clutch Stage 3 Drag Race Clutch Kits

South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$683.62

—

$1,295.62

ACT Street Clutch Discs

ACT Street clutch discs are designed to exceed your high performance standards. Employing solid engineering principles, ACT coordinates a tested balance of clamp load, friction, and pedal feel, plus other characteristics—to offer you unmatched quality, durability, and value, mile after mile. ACT Street discs feature premium organic material with increased friction and high copper content, along with steel backed linings for better heat transfer and tolerance to reduce fade and increase clutch life. These competitively priced discs are also modified with reduced marcel for faster shift action. ACT Street discs are available in several designs—from center hub spring discs for street or race, to their solid hub for race performance with street manageability. Achieve maximum performance from your street machine and take the ACT road to performance.

4.55 out of 5 stars ( 11 )

$160.00

—

$179.00

ACT Xtreme Clutch Kits

ACT Xtreme clutch kits pave the road to high performance by meshing solid products, outstanding quality, and exceptional value. These Xtreme clutch kits with racing or street discs are based on solid engineering principles. They afford a clamp load increase of 50 to 100 percent with moderate-to-stiff pedal feel, and many of these new (not rebuilt) units are SFI-certified to ensure safety. You've spent long hours building your engine; now put it in motion with the smooth, precise feel and longer life of an ACT Xtreme clutch kit.

4.5 out of 5 stars ( 16 )

$535.00

—

$620.00

LuK Clutch Kits

Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.

4.42 out of 5 stars ( 384 )

$86.99

—

$901.99

ACT Heavy-Duty Clutch Kits

ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.

4.54 out of 5 stars ( 87 )

$344.99

—

$980.99

Exedy OE Clutch Kits

Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.

4.5 out of 5 stars ( 14 )

$308.27

Clearance

Dorman Clutch Slave Cylinders

Are you looking for a replacement slave cylinder for your clutch? Dorman has you covered with their OEM Dorman clutch slave cylinders. Dorman clutch slave cylinders deliver increased performance and reliability. Dorman has industry-leading slave cylinder application coverage that is second to none. If you want your clutch working at optimum levels, then you need one of these Dorman clutch slave cylinders.

4.52 out of 5 stars ( 75 )

$16.99

—

$42.99