Availability
Showing In Stock Items. Show All 247 Items.
On Sale
B&M Racing introduces the Precision SportShifter for 2007-18 Jeep Wrangler JK models equipped with the NSG370 6-speed manual transmission. The unit features a CNC billet aluminum case with an electric blue anodized finish which houses internal components made from super tough 4140 chromoly. The shift throw has been reduced by 35 percent over the factory shifter along with the detent pressure which has been significantly increased creating a noticeably stiffer shift feel. This was done to address problems with the softness of the factory shifter detent springs which easily pop out of gear while off-roading. The shifter uses the factory shift stick and knob.
( 12 )
$749.95
$673.95
On Sale
RT Off-Road slip yoke eliminator kits will keep your vehicles moving in the right direction. These kits include the necessary parts to convert the 231 transfer case to a rear fixed-style yoke, which not only provides great strength, but extends driveshaft length approximately 4 in., while reducing the angle. RT Off-Road provides a CV-style yoke, knowing that this style of driveshaft eliminates driveline vibrations and extends life. A properly lifted Jeep with the right aftermarket parts can explore all types of terrain. Keep from screaming for your life with RT Off-Road slip yoke eliminators.
( 4 )
$228.99
—
$551.99
$206.09
—
$496.79
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$461.95
—
$1,616.95
$415.76
—
$1,455.26
On Sale
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,169.99
$4,704.69
On Sale
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
$1,104.96
On Sale
B&M heavy-duty transfer case shift cable conversion kits replace the failure-prone Z-linkage with zinc-plated steel ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 48 in. long cable is an excellent option for lifted builds and the powdercoated brackets will provide years of trouble-free shifts. The cable is compatible with the factory shifter but complements any aftermarket shifter designed to use a factory cable. Features: * Replaces the stock Jeep TJ cable and plastic ends for reliable, positive shifts * Heavy-duty .425-inch cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 12 )
$175.95
—
$182.95
$158.35
—
$164.65
On Sale
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 95 )
$86.99
—
$585.99
$78.29
—
$527.39
On Sale
Yukon Gear & Axle axle bearings are made from top-quality materials to original specs, so you can be sure that you're getting a quality product. These replacements are available for a variety of axle model applications, from the 1950s and up.
( 74 )
$31.99
—
$209.99
$27.19
—
$178.49
On Sale
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$244.99
$220.49
On Sale
These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.
( 94 )
$412.95
—
$449.95
$370.95
—
$403.95
On Sale
Spartan lockers are affordable, reliable traction. These USA Standard Gear Spartan lockers are mechanical lockers that fit into a standard differential carrier, replacing the open spider gears. They do not use thrust washers and have a revolutionary spring and pin design to make installation a snap! Spartan lockers feature high-nickel 9310 chromoly drivers and couplers for added strength. Give your vehicle great traction and save some cash. Drop in Spartan lockers for improved traction. They're available for a variety of makes and models spanning more than a half-century.
( 31 )
$255.00
—
$666.99
$229.50
—
$566.94
On Sale
Differentials are the unsung heroes of vehicle performance. Some are open, while others have Trac-Loks, and a few are lockers. Crown Automotive differential carrier rebuild kits are designed and built to keep them working properly. Built to OEM specs for excellent fit and reliable performance. They provide the necessary parts to update each differential and keep power going where it belongs. Differentials put their all into transferring power from the transmission to the axles. When they decide to take a break, put them back to work with Crown Automotive differential carrier rebuild kits.
( 3 )
$118.99
—
$324.99
$107.09
—
$292.49
On Sale
B&M Jeep shifter stick assemblies are designed specifically for all Jeep Wrangler TJ/JK models with 6-speed manual transmissions and can be used as either a direct-replacement of the factory shifter stick, or as the finishing touch when used with the B&M JK Precision SportShifter. They are constructed from high-strength 4340 nickel-chromoly steel and feature improved bends that provide more shifting leverage and comfort than the factory stick. The stock Jeep shift handle has a thick and soft rubber isolator between the shifter and the stick that reduces transmission noise inside of the Jeep, but degrades over time and results in a very "mushy" feel. B&M Jeep shifter stick assemblies feature a billet aluminum block with four replaceable rubber O-rings that provide isolation from transmission gear noise and also result in shorter, noticeably firmer and more positive shifts. The shift handle is finished off with a durable black e-coat and topped with a black round B&M logo engraved shift knob showing that you take off-road performance seriously. They feature a 3/8 in. x 16 thread pattern so you can also customize the look of your shifter with other styles and colors of shift knobs.
( 12 )
$274.95
$247.45
On Sale
Centerforce pressure plate bolt kits feature premium-grade material and a black oxide finish. These bolts fit directly to the flywheel and are available in different sizes to work on a wide variety of applications.
( 10 )
$35.95
$32.36
On Sale
Yukon Gear & Axle differential carrier cases offer the strength and quality you demand for your ride. Available for many axles and ratios, these cases are constructed from first-rate materials to strict standards, ensuring durable, reliable performance.
( 21 )
$115.99
—
$605.99
$104.39
—
$515.09
On Sale
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$524.99
—
$1,333.99
$472.49
—
$1,133.89
On Sale
Yukon Gear & Axle U-joint straps keep your driveshaft in place. These bearing retainer straps are available to fit most of the popular U-joint sizes and yokes. Choose the style that's compatible with your vehicle's axle model.
( 30 )
$19.99
—
$28.99
$16.99
—
$24.64
On Sale
Centerforce clutch hydraulic master and slave cylinders are of the highest quality available. In most applications the new hydraulics are a direct Original Equipment (OE) replacement, which features a wider range of travel, steel braded lines with a protective heat shield and a Jiffy-Tite dry disconnect for easy installation. Whether you're doing some tough city driving, or racing at a track event, ensure your clutch can handle the demands of your high powered vehicle by installing Centerforce clutch hydraulic master and slave cylinders for improved clutch performance.
( 1 )
$283.95
—
$440.95
$255.56
—
$396.86
On Sale
Clearance
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 106 )
$222.00
—
$694.99
$199.80
—
$590.74
On Sale
Centerforce billet steel flywheels are available for popular import and domestic vehicles, including trucks. They're CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installations. No modifications are required in combination with either Centerforce clutches or other clutch assemblies built to OEM specs. These rugged flywheels are SFI-approved, so you know that you can count on them--on the street and on the track.
( 61 )
$419.95
—
$608.95
$377.96
—
$548.06
On Sale
Crown Automotive offers a wide selection of axle bearings to meet your application needs. They have bearings for the front and rear that will keep your axles spinning without resistance. Whether you need just a bearing or a complete bearing and seal kit, Crown Automotive has the quality choices to get your project revolving.
( 31 )
$19.99
—
$91.99
$17.99
—
$82.79
On Sale
Magnum Grip Pro Stick shifters from B&M include all of the standard Pro Stick features, plus the new Magnum grip handle, CNC-machined from billet aluminum. Compact, strong, and functional--what more could you ask for in a shifter for a drag race car--they're the ultimate shifter for Powerglide applications.
( 20 )
$389.95
—
$472.95
$253.95
—
$307.95
On Sale
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$8.99
$8.09
On Sale
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 66 )
$40.99
—
$410.99
$34.84
—
$349.34
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
