Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
JEEP COMPASS Transmission & Drivetrain
Showing In Stock Items. Show All 20 Items.
Richmond Gear EXCel Ring and Pinion Sets
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 143 )
$221.84
—
$239.03
Yukon Gear & Axle U-Joints
When you don't need a Super Joint, Yukon Gear & Axle also offers other U-joints—including standard, adapter, and lifetime models. But, even though they're not "super," all Yukon universal joints are tough enough to keep your shafts connected and spinning with awesome performance. Order the model designed for your application.
( 23 )
$107.99
VEGE Remanufactured Torque Converters
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 55 )
$118.99
USA Standard Gear Spider Gear Sets
USA Standard Gear spider gear sets offer OEM-quality at a low price. They're available in dozens of configurations for applications from 1955 and up. Depending on the kit you choose, your selection may include all or a combination of side gears, pinion gears, spider gear thrust washers, cross pin shaft, cross pin bolt, and/or roll pin. Restore the performance of your differential with the quality of a USA Standard spider gear set.
( 17 )
$199.99
Yukon Gear & Axle Bearing Kits
Yukon Gear & Axle bearing kits offer quality and cost savings. When you don't need a master overhaul, these kits can save you some money. They include Timken bearings and races, along with high-quality small parts--and each kit is checked for the right fit to meet your application and replacement needs. These packages are available for dozens of axle models. So when you're ready to install replacement ring and pinion gears in your differential, start with a dependable bearing kit from Yukon. Yukon Gear & Axle bearing kits include: * Pinion bearings * Carrier bearings * Crush sleeve (where applicable) * Oil baffles and slingers (where applicable) * Pinion seal * Gear marking compound and brush
( 9 )
$166.99
Crown Automotive Direct-Fit Axle Shaft Assemblies
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 96 )
$137.99
—
$172.99
USA Standard Gear Master Overhaul Kits
USA Standard Gear master overhaul kits have everything you need to properly rebuild the differential in your vehicle. They let you finish your ring and pinion gear installation or axle rebuild with confidence. These install kits offer a lower price alternative when costs must be kept down. Most USA Standard Gear master overhaul kits include: * Pinion bearings and races * Pinion shims * Carrier bearings and races * Carrier shims * Crush sleeve (if applicable) * Slingers (where used) * Pinion seal and nut * Ring gear bolts * Cover gasket or gasket maker (RTV) * Marking compound with brush * Thread locker
( 31 )
$177.99
Crown Automotive Wheel Bearing and Hub Assemblies
That strange noise you hear when cornering or making sharp turns may be a telltale symptom of worn-out bearings. Crown Automotive wheel bearing and hub assemblies allow you to repair these crucial safety and handling components with quality replacement units. Return to the handling and performance you expected when the vehicle rolled off the factory line. These assemblies are available in numerous variations for fitment on a wide variety of makes and models.
( 3 )
$156.99
Sachs Stock Replacement Clutch Master Cylinders
Replace your worn-out clutch master cylinder with affordable Sachs Stock Replacement parts. The clutch master cylinder, or clutch pump, is the main type of hydraulic clutch operating system. This simple hydraulic principle is used to transmit the required force from the clutch pedal to the slave cylinder. As part of the clutch system, this part is connected on one side to the clutch pedal via a lever mechanism. The other end is connected via a hose to the slave cylinder, which moves the clutch. These vital components allow the driver to manipulate the clutch pedal correctly, always with less effort than would be needed if this part were not present in the vehicle. Sachs clutch master cylinders are built to OEM specifications to offer the same fit, form, and function as the factory OE part to help you restore your vehicle back to its proper operation. Select the Sachs Stock Replacement clutch master cylinder for your application.
( 2 )
$163.99
FAG USA Wheel Bearing and Hub Assemblies
FAG USA wheel bearing and hub assemblies are compact, lightweight, maintenance-free hubs. They combine the cost-effectiveness and proven performance characteristics of other bearings with the convenience of an integral mounting flange for mounting brake, disc, and wheel. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearing and hub assemblies, available for hundreds of applications.
( 11 )
$209.99
LuK Clutch Slave Cylinders
Historically, the core business of LuK—an abbreviation that, in English, stands for disc and clutch makers--is clutches, their associated systems, and powertrain dampers. LuK clutch slave cylinders have a long operating life and low-friction characteristics, thanks to the special design of the central seal, with a plastic reinforcement and the use of special lubricants. LuK offers both hydraulic concentric slave cylinders fitted within the bellhousing and external slave cylinders for lever-operated throwout bearings. All automatically adjust for clutch wear.
( 58 )
$131.99
Dorman Automatic Transmission Shifter Cables
Are you looking to replace your shifter cable? Get one of these Dorman automatic transmission shifter cables for reliable shifting performance. They are manufactured from quality materials and have been designed to fit your OEM shifter assembly and install in the stock location. Don't take chances with damaged or worn shifter cables--Dorman automatic transmission shifter cables won't leave you stranded.
( 2 )
$117.95
