Availability
Showing In Stock Items. Show All 18 Items.
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$999.95
$359.95
—
$898.95
On Sale
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$631.95
$538.95
—
$567.95
On Sale
B&M heavy-duty transfer case shift cable conversion kits replace the failure-prone Z-linkage with zinc-plated steel ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 48 in. long cable is an excellent option for lifted builds and the powdercoated brackets will provide years of trouble-free shifts. The cable is compatible with the factory shifter but complements any aftermarket shifter designed to use a factory cable. Features: * Replaces the stock Jeep TJ cable and plastic ends for reliable, positive shifts * Heavy-duty .425-inch cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 13 )
$175.95
$158.35
On Sale
These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.
( 95 )
$433.95
$389.95
On Sale
Magnum Grip Pro Stick shifters from B&M include all of the standard Pro Stick features, plus the new Magnum grip handle, CNC-machined from billet aluminum. Compact, strong, and functional--what more could you ask for in a shifter for a drag race car--they're the ultimate shifter for Powerglide applications.
( 21 )
$389.95
$253.95
On Sale
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 91 )
$87.15
—
$132.95
$78.45
—
$119.65
On Sale
B&M high-flow transmission filters are designed to help protect your transmission component, by removing unwanted particles from your automatic transmission fluid--and that's a good thing!
( 14 )
$31.92
$28.73
On Sale
Replace your old flywheel/torque converter inspection cover with Mr. Gasket inspection covers. They are designed to fit most Chevrolet applications, these covers are made from beautifully chrome plated heavy-gauge steel. These covers are corrosion resistant and facilitate easy installation.
( 8 )
$69.35
$62.45
On Sale
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 188 )
$27.14
$24.43
On Sale
Mr. Gasket transmission dipsticks complement your engine compartment with beautiful chrome. These steel dipsticks are available in one-piece designs with attached mounting tab, and in 2-piece designs with separate bellhousing mounts. Choose the model designed for your transmission application. Your Mr. Gasket dipstick may include: * Dipstick * Chrome plated steel tube * O-ring * Separate bellhousing mounting tab
( 6 )
$32.04
$20.83
On Sale
Hays high-performance throwout bearings are designed to withstand the high spring pressure and high-rpm conditions common to racing clutches. They're heat-treated and Blanchard-ground to ensure trueness.
( 21 )
$110.95
$61.95
On Sale
Clearance
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,129.99
—
$1,802.99
$1,016.99
—
$1,622.69
On Sale
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$899.95
$808.95
On Sale
What is your suspension built on? Artec Industries 8.8 in. modular axle trusses provide the supportive framework and a good foundation for success. Manufactured from precision CNC-cut and bent 1/4 in. mild steel and reinforced with interlocking 1/4 in. thick gussets, these 8.8 in. trusses beef up your axles and the link mounting surface for maximum strength. They have a low-profile design, allowing link joints to be mounted with ideal geometry—and they're shorter, so you can mate them with factory or Artec leaf spring perches. Trusses include trim-to-fit bridges that tie into a flange off the pinion of the axle and fortify the might of the whole truss. Build a system designed to take serious abuse; start with 8.8 in. modular axle trusses from Artec Industries.
( 5 )
$259.99
$233.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
