Availability
Showing In Stock Items. Show All 41 Items.
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$855.95
On Sale
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$1,049.95
—
$1,175.95
$944.96
—
$1,058.36
Summit Bucks
Instant Rebate
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$923.99
—
$993.99
Hook up to your GM manual transmission with Advance Adapters Gen III/LS Series flywheel and clutch kits. These conversion kits contain custom clutch components designed to adapt the Gen III/LS Series to your GM manual transmission. The flywheel is specially designed for the included high performance LUK clutch components. Do you have a special conversion? Advance Adapters LS series Gen III manual transmission conversion kits make change easier. Features include * Custom flywheel * 11mm flywheel bolts * 11 in. pressure plate and disc * Pilot bushing spacer * Throwout bearing * 10mm bellhousing bolts * 10mm lockwashers * XRP dowel bolts
( 5 )
$888.00
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 320 )
$781.99
—
$947.95
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 234 )
$852.99
—
$964.99
On Sale
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$869.00
$782.10
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$790.59
—
$1,031.98
On Sale
B&M Traveler torque converters are designed for use in motor homes, tow vehicles, or other heavy-duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. Stronger than a stock converter, these Travelers have been internally modified to provide about 300 rpm more stall speed. This helps in initial acceleration without sacrificing normal highway operation. Pressure tested, fully balanced, and manufactured for long life, these Traveler converters will get you moving and on your way.
( 3 )
$899.95
$808.95
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$865.99
—
$891.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$1,040.99
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$869.99
—
$895.99
XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.
Not Yet Reviewed
$1,043.25
These Maximizer Street Performance torque converters are built with extra reinforcement and thicker mounting surfaces to withstand the additional load and vibration put through the drivetrain by a truck with performance modifications. By providing additional stall, your truck will see better initial takeoff and will not lug the engine when using big tires. Special attention is made to match the converters to the power range of most trucks that do double duty as off-road and daily drivers. Improved rear-wheel horsepower and elapsed times are some of the results.
( 7 )
$786.95
South Bend Clutch Dyna Max ceramic clutch kits engage your rig with ceramic buttons on each side of the clutch disc. The kits include flywheels and offer modified pressure plates for a higher plate load and smooth clutch engagement. South Bend Clutch Dyna Max ceramic clutch kits fit several high performance diesel rig applications.
( 3 )
$1,160.54
On Sale
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. Yukon Gear & Axle 4340 chromoly axles provide up to 50 percent more strength than stock axles … critical for extreme performance applications with large tires, high torque and high horsepower. These 4340 axles are manufactured using the latest technologies and the highest quality materials for long life in off-road, street and track use. Yukon Gear & Axle 4340 chromoly axles are offered in complete kits or individually.
( 36 )
$1,246.99
$1,059.94
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 26 )
$971.99
—
$1,083.99
On Sale
Holley LS clutch installation kits include all the hardware and components needed for a complete clutch install on a 6-bolt crank LS engine using a T-56 transmission. A 12 in. organic disc with a 6-spring helix sprung hub provides the superior grip needed for the strip, while the matched diaphragm-style pressure plate provides a pedal feel comfortable enough for the street. This provides 30 percent more clamping pressure and transmits that through a billet steel flywheel. Features: * 12 in. organic single disc clutch with 1 1/8 in. 26-spline hub for LS engines with 6-bolt crankshaft * 6-bolt billet steel flywheel provides strength and a fresh, new foundation for the clutch * Street/Strip clutch kit provides excellent holding strength with a smooth daily driver pedal feel * Designed for power levels up to 550 hp naturally aspirated Please note: Hydraulic release bearing to transmission bolts are not included.
Not Yet Reviewed
$1,249.95
$812.95
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 101 )
$1,044.49
Beef up your GM chassis for less with 9 in. non-floater offset housing kits from Allstar Performance. These kits fortify your 1978-88 GM intermediate chassis with much stronger Ford 9 in. style. Allstar offset housing kits are delivered with 31-spline axles with bearings and seals installed, a select used center section, and new axle tubes with large-bearing late Ford/Torino-style ends. Choose between two available lengths. Give your GM rear-end some brawn with non-floater offset housing kits from Allstar Performance.
( 1 )
$999.99
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$869.24
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,116.99
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$891.99
South Bend Clutch stock replacement kits are an upgrade for your GM, Ford, or Dodge diesel rig. These single-disc kits offer organic friction material for smooth engagement with a high-quality construction for longer service life. The kits are available with or without a solid flywheel. Whether you need to replace your failing stock clutch or you want to increase your truck's horsepower and need a clutch that can keep up, South Bend Clutch has the best options for you. Select the stock replacement clutch needed.
( 5 )
$829.78
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
