CHECKER Transmission & Drivetrain - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

B&M Tork Master Torque Converters

Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.

4.42 out of 5 stars ( 184 )

$337.95

—

$562.95

TCI StreetFighter Transmissions

TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.

3.57 out of 5 stars ( 145 )

$3,124.95

TCI Super StreetFighter Transmissions

TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

3.82 out of 5 stars ( 57 )

$3,478.95

B&M Holeshot Torque Converters

A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.

3.87 out of 5 stars ( 83 )

$409.95

—

$972.95

Lokar Hi-Tech Flexible Braided Stainless Transmission Dipsticks

Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.

4.55 out of 5 stars ( 337 )

$138.95

—

$163.95

Timken Wheel Bearings

Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.

4.71 out of 5 stars ( 263 )

$10.99

—

$48.99

B&M Nitrous Holeshot Torque Converters

Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.

4.43 out of 5 stars ( 21 )

$614.95

—

$921.95

Lokar Hi-Tech Kickdown Kits

Lokar Hi-Tech kickdown kits are made with an extruded liner for extended life--and are available in either stainless steel braided housing, black stainless steel braided housing, or black housing. They feature matching aluminum fittings and ferrules to help eliminate frayed ends and are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the Lokar Hi-Tech kickdown kit designed for your transmission application.

4.79 out of 5 stars ( 467 )

$135.83

—

$166.95

Lokar Midnight Series Flexible Braided Stainless Transmission Dipsticks

Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.

4.65 out of 5 stars ( 80 )

$151.95

—

$176.95

LuK Clutch Kits

Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.

4.44 out of 5 stars ( 383 )

$129.99

—

$134.99

PRW Gold Series Flexplates

PRW Gold Series flexplates are engineered to handle extreme duty applications and designed to endure the punishment of modern high horsepower engines. The 4mm thick centerplate provides a solid foundation for these direct bolt-on drivetrain components. Ring gears are precision double-welded, utilizing robotic machinery and cold-welding processes for added durability. These flexplates are rigorously inspected throughout the manufacturing cycle to ensure you receive the expected quality. They are available in a wide variety of configurations to precisely match your application. Raise the bar on your high performance vehicle with PRW Gold Series flexplates. Order the style recommended for your specific vehicle and engine size. Features and specs: * Designed to fit standard OEM, aftermarket replacement, and high performance torque converters * SFI 29.1 certified * Forged one-piece steel ring gears * 0.035 in. thicker than stock flexplates * Constructed from cold-rolled chromoly steel * Long lasting yellow zinc plated finish

4.11 out of 5 stars ( 47 )

$84.52

—

$90.77

TCI Outlaw Shifters

TCI Outlaw shifters not only ensure that you will find the right gear when you need it, but also deliver great looks. Constructed of billet aluminum with a pistol grip shifter, they are rugged enough to handle both street and race duty, while complementing the interior of any vehicle. They feature rugged construction and are perfectly suited for competition use, being compliant with NHRA/IHRA-legal reverse lockout regulations. In addition, Outlaw shifters feature a park/neutral safety switch, along with provisions for a reverse light system. A shifter cable and installation hardware are included.

4.77 out of 5 stars ( 88 )

$417.95

—

$511.95

Hays Street 450 Clutch Conversion Kits

Hays Street 450 clutch conversion kits are an excellent upgrade offering up to 30 percent more holding power (clamping force) over your stock clutch. They're designed for handling stock to mildly modified engines—up to 450 horsepower. If drivability along with a stock pedal feel are the leading factors for your application, then order the Hays Street 450 clutch conversion kit recommended for your specific vehicle and engine size. Features, items, and specs: * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded damper springs * Pressure plate * Clutch disc * Throwout bearing * Alignment tool * Instructions

3.38 out of 5 stars ( 8 )

$486.95

—

$584.95

Moog Premium U-Joints

Moog Premium U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals, and a grease fitting in the cross body make for easy maintenance. The U-joints are available for nearly two dozen positions, in universal and vehicle-specific applications.

4.64 out of 5 stars ( 214 )

$12.99

—

$15.99

Silver Sport 621 Manual Transmission Bellhousings

Silver Sport 621 manual transmission bellhousings are a good match for your street or trip transmission. Re-engineered by SST, these aluminum 621 GM reproductions feature CNC-machined, thick wall titanium-aluminum alloy construction for Chevy engines with 168-tooth flywheels.

1.0 out of 5 stars ( 1 )

$319.95

On Sale

Hays Street 650 Clutch Conversion Kits

Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool

4.67 out of 5 stars ( 6 )

$578.95

—

$1,075.95

Summit Racing Equipment® U-Joints

Don't ignore the signs! A clunking and clanging noise, intense vibrations at accelerated speeds ... it could be an indication of a failing U-joint. If that's the diagnosis, here is the solution--replace it with one of our Summit Racing Equipment® U-joints. These drivetrain components are engineered from quality materials to meet or exceed OE standards, and are available in applications with forged and case-hardened alloy steel crosses for lasting service life. The bearing cups are case-hardened for strength and durability, and superior seals help keep contaminants out and allow for proper lubrication. Plus, a grease fitting in the cross body allows for easy maintenance. Select your part application and install it to avoid complete U-joint failure--problem solved!

4.06 out of 5 stars ( 32 )

$14.99

Moog Super Strength U-Joints

Moog Super Strength U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals and a grease fitting make for easy maintenance. In addition, the Super Strength U-joints have an exclusive microshield coating to protect against rust and corrosion. They are available in greasable and non-greasable styles for more than a dozen positions--in universal and vehicle-specific applications.

4.59 out of 5 stars ( 227 )

$16.99

—

$18.99

TCI Heavy-Duty RV Transmissions

For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.

3.67 out of 5 stars ( 3 )

$2,885.95

Lokar Midnight Series Stainless Steel Hi-Tech Kickdown Kits

Lokar Midnight Series stainless steel Hi-Tech kickdown kits have PTFE-lined cables, which are made with an extruded liner for extended life. They feature black anodized aluminum fittings and ferrules to eliminate frayed ends and a black stainless steel braided cable jacket. The kits are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the model recommended for your transmission application.

4.57 out of 5 stars ( 37 )

$161.95

McLeod Pressure Plate Bolts

McLeod pressure plate bolts fasten your pressure plate to your flywheel for durable bolt-on performance. The bolts come in various thread sizes and styles to ensure a correct fit for your specific vehicle application. They are manufactured from premium-grade steel and sport a black oxide finish to resist corrosion. When it comes to bolt-on performance, make McLeod your parts connection and get the most out of your ride.

4.17 out of 5 stars ( 24 )

$29.00

PRW Flexplate Fasteners

PRW flexplate fasteners are specifically designed to be stronger than OEM bolts. Using SCM-4141 alloy steel, they are cold-formed with rolled threads and heat-treated to ensure they are of the highest quality available on the market. PRW flexplate bolts are rated at 200,000 psi. Choose the thread size you need.

1.0 out of 5 stars ( 1 )

$12.25

Mr. Gasket Automatic Transmission Oil Pans

These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.

4.23 out of 5 stars ( 93 )

$89.35

—

$135.95

Motive Gear Ring and Pinion Sets

Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.

4.44 out of 5 stars ( 284 )

$376.12