Availability
Summit Bucks
Instant Rebate
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$805.99
Big torque doesn't have to mean big traction problems. Eaton Posi Performance differentials combine carbon friction discs with precision-forged gears to give you great traction, even under higher torque loads. Plus, the carbon friction discs produce smooth, quiet performance for the life of your vehicle.
( 104 )
$750.99
Lokar electronic sport shifters allow you to take control of your automatic transmission whenever you desire. Just shift your lever from drive into sport mode and begin bumping through the gears. Lokar has maintained all of the safety features from their traditional units, and these sport-mode shifters are available for several applications in different shifter lever lengths and knob styles. Retain classic looks, while adding new technology with Lokar electronic sport shifters. Features include: * Positive lock-out in Park and Neutral * Neutral safety switch * Floor mount design, cable operated * Standard automatic with integrated "Sport Shift" mode * Works will all current Lokar knobs and adapters * Several lever lengths in straight or bend-styles available * Works with most aftermarket controllers * Cable-integrated bracket
( 24 )
$795.95
—
$944.95
TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. Simply install them with the included instructions and then start the systems by answering the simple setup wizard questions on the included hand-held unit. They're capable of real-time switchable calibrations, which allows for multiple setups. The multi-shift settings include a full manual mode for using bump or paddle shifters. The TCI EZ-TCU automatic transmission controllers allow for maximum electronic control over shift points, shift firmness, and shift speed. Self-diagnostics enable users of every skill level to fully utilize their capabilities. Be sure to match your particular transmission with the correct EZ-TCU controller, as some models are designed for pre-2009 applications ... and other models are for 2009 and later.
( 38 )
$1,025.95
On Sale
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 6 )
$939.00
$845.10
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$999.95
$763.95
—
$949.95
On Sale
USA Standard Gear ring and pinion gear kit packages provide all you need to re-gear your front or rear differentials. They include ring and pinion sets along with master overall kits to fully complete your job. Save time searching for components—and save money by purchasing everything at the same time. Service the front or rear of your rig with a ring and pinion gear kit package from USA Standard Gear.
( 3 )
$882.99
$750.54
On Sale
B&M Traveler torque converters are designed for use in motor homes, tow vehicles, or other heavy-duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. Stronger than a stock converter, these Travelers have been internally modified to provide about 300 rpm more stall speed. This helps in initial acceleration without sacrificing normal highway operation. Pressure tested, fully balanced, and manufactured for long life, these Traveler converters will get you moving and on your way.
( 3 )
$899.95
$808.95
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 80 )
$1,099.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$970.99
—
$1,040.99
Summit Bucks
ACDelco driveshafts are designed to replace your factory originals with no modifications. They're manufactured from quality materials and have the stock connections for an easy bolt-in fit. These driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 6 )
$772.99
—
$787.99
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$872.67
—
$1,173.99
On Sale
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$899.95
These TCI paddle shifters are designed to work with any automatic 4 or 5-speed transmissions controlled by the revolutionary TCI transmission control unit. These shifters feature distinctive show-car styling and shifting performance that's perfect for track days or highway cruising. TCI paddle shifters communicate to the transmission control units through a wireless CAN signal with no worries about signal interference or disruption. The steering wheel mounted units operate by slim, 1/2 in. thick paddle shifters that instantly instruct the transmission as to your gear of choice without hesitation. These shifters fit all 5 and 6-bolt aftermarket steering wheels and come complete with server spacers of varying widths, allowing you to adjust the steering wheel location for your personal preference. Power for the TCI paddle shifter systems comes from the horn button relay rather than from batteries that must be replaced frequently. Additional features include: * Fit all 5 and 6-bolt aftermarket steering wheels and provide consistent, repeatable shifting for g-machines and touring cars * Work with any automatic 4 or 5-speed transmission controlled by the revolutionary TCI transmission control unit * Utilize CAN signal for gear selection without interference or hesitation; includes easy-to-read digital gear display powered by car horn connections * Easy-to-install, slim line, 1/2 in. thick paddles with stylish black anodized finish
( 2 )
$972.95
On Sale
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$1,133.95
$1,020.56
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$1,049.95
$808.95
—
$943.95
On Sale
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$899.95
$808.95
On Sale
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$908.99
—
$1,097.99
$772.64
—
$933.29
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$974.95
—
$1,049.95
On Sale
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$1,106.00
—
$1,175.00
$955.50
—
$1,015.70
Manufacturer Rebate
These Powertrax no-slip traction systems are the latest design in traction-adding differential technology. They combine the smooth operation of a limited-slip differential with the traction performance of a locking differential. A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Special gear and spring designs reduce the backlash and, therefore, the driveline windup. Only ultra-strength material that is 67 percent stronger than titanium is used. Installation is simple because no ring and pinion setup is required. In addition, no special tools or oils are needed. Step-by-step, model-specific instructions are provided with every kit.
( 81 )
$789.99
Manufacturer Rebate
Powertrax Grip LS traction systems are the latest design in differential tech upgrades. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined case. These systems use carbon fiber and steel friction plate technology, delivering streetable and consistent traction. They arrive completely assembled--and because there are friction plates on machined internal gears, they are fully rebuildable. The carriers are the ideal solution for just about any light truck, sport utility, and muscle car on the road today.
( 5 )
$782.34
—
$924.99
On Sale
ACT Sport clutch kits optimize the road to high performance by meshing solid products, outstanding quality, and exceptional value. They're crafted from CNC-machined parts and computer-balanced with no loose pieces to wear out or rattle for quiet, trouble-free operation. These Sport clutch kits with street discs are based on solid engineering principles, affording a clamp load increase of 20 to 40 percent with moderate pedal feel, and many of these new, not rebuilt units are SFI-certified to ensure safety. Get the power of your engine in motion with the smooth, precise feel and longer life of the ACT Sport clutch kits.
( 8 )
$1,083.00
—
$1,153.00
$935.90
—
$996.10
Clearance
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 320 )
$773.99
—
$1,003.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
