Availability
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "C" kits are the most complete packages for those of you running a dual T-case setup. These kits contain all new parts and are machined to accept 4.7 input gears. Trail-Gear Top Shift "C" conversions include everything you need—even a twin stick—to accomplish your conversion properly. These kits include: * Shift rails * Shift fork * Shift fork tube * Roll pins * Twin stick shift kit * T-case block off plate * Gaskets
Not Yet Reviewed
$379.99
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "A" kits contain the parts you need to accomplish your conversion properly. The parts are all new and machined to accept 4.7 input gears. Trail-Gear Top Shift "A" conversions include shift rails, fork, fork tube, and roll pins.
( 2 )
$199.99
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "B" kits are for those of you running a dual T-case setup. You need to block off the unused hole and you'll need a new top shifting shifter. These "B" kits contain what you need to accomplish your conversion properly. The parts are all new and machined to accept 4.7 input gears. Trail-Gear Top Shift "B" conversions include shift rails, fork, fork tube, and roll pins—plus, T-case shifter kit, block-off plate, and gaskets.
Not Yet Reviewed
$279.99
Trail-Gear offers Trail-Creeper 2.28 crawl boxes—ready to bolt onto the front of a top shift-style, gear driven Toyota transfer case. Transfer cases are made from two basic sections, the reduction section and the 4WD section. To build a dual transfer case, two reductions boxes are bolted back-to-back with a dual case adapter. These two are then bolted to a 4WD section. Available with 21 or 23 spline input and output gears, each unit is completely rebuilt and inspected, and has a low range gear ratio of 2.28. Whether you're looking to maintain, optimize, or upgrade, choose Trail-Gear for the quality parts and kit components that you need to give you confidence while driving through even the most difficult obstacles. Important Note: Floorboard and drive shaft modifications are required for dual transfer case installation.
( 3 )
$1,299.99
It's always a plus when we get something that exceeds our normal expectations. Many off-road enthusiasts buy Trail-Gear Creepy Twin transfer case shifters in order to drive in 2WD low—not realizing how much easier the twin sticks make it to shift in and out of 4-low. Access to 2WD low comes in extremely handy in tight switchbacks and other places on the trail where gear reduction is necessary, but 4WD isn't. These shifters are built to impress, with polished cast aluminum bases, black wavy heat-treated 1020 steel shifters, chromoly internal crosspin, and two shift knobs—one for 4.70 and the other for 2WD/4WD. Creepy Twin shifters also feature a splash-resistant oil breather, O-ring seal around each lever, and shifter gasket. To allow independent operation of the shift rails, you'll need to remove the interlock pin from the transfer case. Make 4-wheeling easier with Trail-Gear Creepy Twin transfer case shifters.
( 4 )
$299.99
Trail-Gear Trail-Creeper 4.70 single transfer cases can be installed as replacements for your stock gear-driven case or combined with crawl boxes to create dual transfer cases. TG Trail-Creepers feature a 4.70 low-range gear set in fully rebuilt and inspected cases. They have triple-drilled flanges installed on both front and rear outputs and are available with 21 or 23-spline input gear, plus a choice of shifter options. All models include Trial-Gear Trail-Safe T-case output seals installed.
( 2 )
$1,999.99
Trail-Gear axle gussets help prevent the bending of your axle housing. These housing braces weld on top of your Toyota front solid axle to provide additional strength. Beef up your front-end with Trail-Gear upper axle gussets.
( 3 )
$39.99
Trail-Gear axle trusses weld onto the top of your OEM or Rock Assault axle housing for extra protection against bending during competition or other extreme applications. The flat top design of Trail Gear's axle truss allows for installation of any link brackets that you wish to install. This will not only give you the peace of mind that your rear axle housing will last a lifetime, but also add a sharp, durable look to the axle housing.
( 2 )
$79.99
—
$139.99
Trail-Gear transfer case shifters are stock replacement shifter handles and base. Get back in gear faster with these shifters. They bolt in using your stock bolts and fit the top shift gear drive transfer cases on the vehicles noted in applications.
( 1 )
$99.99
—
$139.99
Trail-Gear Rock Assault rear axle trusses will weld onto the top of your Rock Assault 9 rear axle housing for extra protection against bending during competition or other extreme applications. These trusses are designed to allow for easy installation. The flat top design of Trail-Gear axle trusses allows for installation of any link brackets that you wish to add. Rock Assault 9 rear axle trusses will not only give you the peace of mind that your rear axle housing will last a lifetime, but they add a sharp, durable look to the axle housing. The steel braces are available with a 3 in. or 3.5 in. O.D.
Not Yet Reviewed
$139.99
Don't be stranded with busted knuckles when you're riding the trails. Keep your steering knuckles in top condition with Trail-Gear knuckle sandwich kits. These kits are an assembly of five separate TGI kits for regular drivetrain maintenance. You can save time and money by staying in top operating condition with regular servicing of your system--wheel bearings, seals, backing plate eliminators, etc.
( 2 )
$199.99
Trail-Gear offers transfer case rebuild kits for a variety of applications, including many Toyota and Suzuki trucks from the 1970s, '80s, and '90s. Kits contain all minor gaskets, seals, and bearings for Toyota gear-driven transfer cases from 1979-95. Only top-quality Toyota OEM gaskets are used. Bearings include SKF, NSK, NACHI, and KOYO. Does not include flange nuts, or needle bearings.
Not Yet Reviewed
$139.99
—
$499.99
Trail-Gear assembled third members are off-road strong! These units are built with all-new housings and internal parts and are delivered ready for you to drop into your axle. TG assembled third members feature top-quality ring and pinion gears, lockers, solid pinion spacers for long gear life, and they include triple-drilled flanges to cover common driveshaft patterns. The V6 units feature larger OEM-style V6 gear sets with longer pinion gear. Choose your locker style, case style, and gear ratio for off-road performance from Trail-Gear's selection of assembled third members.
( 2 )
$1,375.10
—
$2,722.67
Trail-Gear offers top-quality clutch kits. Their selection of organic stock and ceramic performance units are sure to meet your needs and expectations. Kits may include clutch disk, pressure plate, release bearing, pilot bearing, and alignment tool.
( 2 )
$199.99
—
$528.89
Trail-Gear assembled Super Finish third members are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. They include all new parts and are ready to drop into your axle with top-quality Super Finish 29-spline ring and pinion gears, and your choice of locker. The ring and pinion gears are treated with the REM Isotropic Super Finishing (ISF) process, which removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra. This means that there is less friction between the gears, reducing wear by 95 percent, and allowing the gears and bearings to run cooler and last longer. Select the ideal kit for your application. Additional features and benefits: * Fully built Super Finish 3rd members--all new parts--no used housings or internal components * 29-spline pinion spline is 7 percent larger in diameter than the 27-spline for increased strength * Available in 4.88 and 5.29 ratios for 4-cylinder, V6, and high-pinion applications * Gear teeth are cut using Gleason CNC hobbing machines and cutters * No break-in period * Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements * Dust shield pre-installed onto flange * High-pinion sets also include a high-pinion oil slinger * V6 units feature larger OEM-style V6 gear sets with a longer pinion gear * Trail-Safe pinon seal and nut included * Flange is quadruple drilled with popular Pickup/4Runner and Tacoma patterns: -- 66mm x 66mm x 11mm (Tacoma) -- 60mm x 60mm x 10mm (Pickup/4Runner and TG heavy-duty driveline) -- 60mm x 68.3mm x 10mm -- 61.5mm x 70mm x 10mm Notes: * Requires ring and pinion setup kit to complete the installation into your existing differential housing * For Toyota 8 in. solid axles only. Will not fit 7.5 in. IFS front axles.
Not Yet Reviewed
$1,491.02
—
$2,987.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
