Availability
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 55 )
$2,085.95
—
$4,932.95
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 151 )
$1,772.95
—
$4,996.95
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$2,700.95
—
$5,119.95
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$1,873.95
—
$3,830.95
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 29 )
$1,596.99
—
$4,976.95
Perfect for a mild daily driver or street rod, these TCI Street Rodder transmission packages give you all of the components necessary to install a new transmission. Using the highest quality TCI manufactured components, each Street Rodder package is equipped with an automatic valve body and valve body performance improvement kit that allows you to achieve firmer, yet not too harsh shifts in the vehicle while remaining fully automatic and retaining the stock shift pattern. Each Street Rodder transmission and torque converter undergo the industry-recognized triple testing to verify that internal fluid pressures and shift characteristics match the strict TCI quality control standards. Torque converters are tested to maintain that the impeller body and pump drive hub remain true and are then pressurized and lead tested to confirm the integrity of the weld seams. Finally, each unit is computer balanced to reduce drivetrain vibrations that can cause serious damage to your converter. For street cruisers who want excellent street performance and lasting durability, the TCI Street Rodder transmission packages provide the prefect solution.
( 1 )
$4,612.95
For serious performance, TCI machined SFI-approved flexplates are a "must have". These .140 in. thick flexplates are constructed of A514 Blanchard ground steel and are SFI 29.1 approved. TCI offers a complete line of Chrysler and Ford flexplates with GM and Ford bolt patterns for use with their adapter plate kits as well as neutral balanced flexplates with 168-tooth and 166-tooth starter rings for Chevy and Pontiac applications. Now you can speed down the track with the confidence of TCI machined SFI-approved flexplates.
( 58 )
$231.95
—
$519.95
Whether you need stock, stamped, or heavy-duty, TCI forged flexplates are your performance solution. TCI offers popular Chrysler, Ford, and Chevy applications. Their forged selection for Chrysler includes special counterbalanced flexplates for neutral balance torque converters in cast crank applications that came with a counterbalanced torque converter. For Ford applications, TCI offers OEM-style small block plates built to precise standards with extra-thick welds to retain starter ring gear, and they are precision-balanced. Their Chevy stamped flexplates are built thicker than stock from high-tensile strength materials with extra welding to help retain the starter ring gear, and to withstand the stress of high-rpm engines and high-stall converters. For high performance, buzzing around at high rpm requires the confidence of TCI forged flexplates.
( 268 )
$67.95
—
$586.95
TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. Simply install them with the included instructions and then start the systems by answering the simple setup wizard questions on the included hand-held unit. They're capable of real-time switchable calibrations, which allows for multiple setups. The multi-shift settings include a full manual mode for using bump or paddle shifters. The TCI EZ-TCU automatic transmission controllers allow for maximum electronic control over shift points, shift firmness, and shift speed. Self-diagnostics enable users of every skill level to fully utilize their capabilities. Be sure to match your particular transmission with the correct EZ-TCU controller, as some models are designed for pre-2009 applications ... and other models are for 2009 and later.
( 37 )
$1,025.95
For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.
( 3 )
$2,349.95
—
$4,127.95
These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures them to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities that they gave their street/strip converter.
( 106 )
$487.95
—
$1,351.95
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 186 )
$40.95
—
$167.95
Installation of these TCI 2004R/700R4 lockup wiring kits makes retrofits into non-ECM 700R4 or 2004R vehicles a snap. They allow automatic operation of the TCC in 4th gear under stable engine operation, and disengage the clutch when accelerating or downshifting. A manual override option is also provided. These TCI torque converter lockup wiring kits are constructed from OEM connectors and oil-resistant wire.
( 60 )
$159.95
These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
( 59 )
$624.95
—
$1,591.95
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 46 )
$371.95
—
$746.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$164.95
—
$570.95
These TCI Performance heavy-duty trans-brake solenoids are engineered with features like a precision-ground steel shaft with a bronze bushing, a shaft-pinned nut for secure placement, and a unique lip seal to prevent fluid leakage while minimizing mechanical drag. Their high-efficiency, precision-wound coil maximizes the amount of copper in the allowable space for maximum force, and their 2-wire setup ensures that a good, quality ground can be established. When you want consistency, TCI has you covered.
( 27 )
$167.95
—
$182.95
TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times. They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.
( 21 )
$559.95
—
$1,127.95
Whether you drive a sand dragger, hill climber, or tractor puller, TCI has the transmission for you. The competition line of full manual 4x4 transmissions is built following the same specifications TCI uses in building thousands of drag race units. Applications are also available with trans-brake valve bodies.
( 1 )
$2,297.95
TCI Outlaw shifters not only ensure that you will find the right gear when you need it, but also deliver great looks. Constructed of billet aluminum with a pistol grip shifter, they are rugged enough to handle both street and race duty, while complementing the interior of any vehicle. They feature rugged construction and are perfectly suited for competition use, being compliant with NHRA/IHRA-legal reverse lockout regulations. In addition, Outlaw shifters feature a park/neutral safety switch, along with provisions for a reverse light system. A shifter cable and installation hardware are included.
( 88 )
$412.95
—
$511.95
Get maximum performance and quicker ETs with these TCI full manual valve bodies. They're engineered to allow full manual control of the valve body, for quicker shift timing and higher line pressures. You get less clutch slippage under high load, so that more power gets to the ground. They're a great choice for bracket cars, monster trucks, and virtually any off-road competition vehicle where a transbrake is either illegal or undesirable.
( 58 )
$221.95
—
$499.95
These TCI Fast-Lap torque converters provide the best of all benefits, including great acceleration when you need it. Utilizing an extremely low stall speed, these torque converters also provide more engine braking going into the corners and faster acceleration coming out of the turns. The Fast-Lap torque converters are the ideal solution for racers looking for better performance at a reasonable price. Combining 35 plus years of torque converter technology and on-track testing, the engineers at TCI selected the optimum stall speed for dirt and pavement Circle Track competition. These reduced stall speed torque converters incorporate heavy-duty oversized bearings for increased load capacity and less drag to deliver a product that is far superior to stock and other aftermarket converters currently available. Like every TCI torque converter, these units feature the exclusive HDT Coating for improved temperature transfer and are triple tested to ensure durability and on-track performance.
( 14 )
$364.95
—
$475.95
Maximize your transmission's power potential! TCI sprag and drum assemblies are designed to reduce rotating mass without compromising drum integrity. They will hold up to five clutches and are hard coated for improved wear characteristics.
( 6 )
$299.95
—
$548.95
These TCI automatic transmission bellhousings are designed to replace your OEM bellhousing. Automatic transmission bellhousings are not SFI-approved for any type of racing.
( 10 )
$424.95
—
$669.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
