Availability
Sonnax output shaft supports are high-strength replacements for the stock Powerglide output shaft support. They are made from high-strength 6061-T6 billet aluminum to ensure rigidity where it is needed most. The supports are purposely built for racing, eliminating the provisions for the governor. A high-quality pre-installed roller bearing keeps friction losses to a minimum, while the billet aluminum construction lowers the weight dramatically. The Sonnax output shaft supports can be used with both long and short OEM and aftermarket tailshaft housings to allow for use in almost any drag racing application. They feature a true bolt-on installation for the popular Powerglide transmission and can benefit both bracket ET and professional drag racers.
( 2 )
$92.47
Sonnax thrust bearings are replacements for your worn automatic transmission bearings to aid in smooth operation and noise reduction. The bearings act as a guide to help limit any axial movement which can hinder performance. Manufactured to exceed OE specifications for superior quality even under extreme conditions, order the Sonnax thrust bearings best suited for your application.
( 4 )
$11.20
—
$67.51
GM 6L45, 6L50, 6L80 and 6L90 automatic transmission units may exhibit multiple line pressure and cooler/converter/lube flow problems due to excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts, and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing a Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs and provide a modest 5 psi increase across the pressure curve. Additional details: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Drop-in Zip Valve parts install quickly and easily Kit contents: * Valve * Spring * Drill bit .040 in. * 2 checkballs (1 extra)
( 2 )
$14.67
—
$62.55
Sonnax ring gear stabilizer kits reduce high-speed vibration and drag, while also preventing damage to short pinion gear teeth. Powerglide transmissions with poorly supported planetary ring gears will experience vibration at high speeds and broken reverse friction plates as it moves off the transmission center line, oscillating out of control. These Sonnax kits install easily on Sonnax bolt-together, 1.80 and 1.69 ratio planetary carriers, and with proper support, the ring gear stays on-center.
Not Yet Reviewed
$208.76
—
$214.05
Sonnax TCC regulator and isolator valve kits assist in recovering hydraulic control and renew TCC performance. Severe wear of the TCC (torque convertor clutch) regulator valve bore, caused by oscillation of the OE valve, allows the regulated converter to apply pressure to your exhaust. This is a primary cause for TCC-related slip code and overheated converters. Exhaust pressure also diminishes line pressure, which can result in burnt clutches. Excess wear at the isolator valve bore reduces TCC apply pressure. Reconditioning the bore and installing a Sonnax TCC regulator and isolator valve kit will restore normal TCC operation by reestablishing the hydraulic integrity of this circuit. Order the kit recommended for your transmission application. Features include: * Sleeve manufactured from highly wear-resistant aluminum * Hard-coat anodized aluminum regulator valve combats premature wear * Isolator valve lengthened to operate in unworn portions of the bore * Annular grooves help center valves in bore to reduce future side-load wear
( 4 )
$18.83
—
$107.85
Solenoid switch valves and plugs in various Chrysler transmissions cause bore wear as they oscillate and stroke during operation. This wear allows pressure loss and cross-leakage, and often permits the plugs to cock and hang up in the bore. This can result in failsafe mode, various codes, bind-ups, and burnt overdrive or 4th clutches. In 41 and 42 series units, TCC concerns can result, including engine stalling due to improper lockup. Reconditioning the bore and installing a patented Sonnax oversized solenoid switch valve and plug kit restores vital clearances for renewed operation and control. Additional details: * Patented Sonnax plugs redesigned to prevent cocking * O-ringed end plug positively seals bore * Annular grooves help center valve and plugs in bore to prevent future side-load wear * Hardcoat anodized aluminum valve and plug combat premature wear * Fits bores containing OE switch valve with .453 in. diameter large spool only Kit contents: -- Valve -- Inner plug -- Outer plug -- End plug -- O-ring
Not Yet Reviewed
$50.57
Ford E4OD and 4R100 transmissions often display shifting irregularities which can be traced to problems with accumulator control valves. Wear ridges form as the valve moves in and out of the bore. Under high-pressure shifts, the valve is allowed to stroke too far, causing it to hang up on these ridges and block oil flow to the associated clutch. This results in soft shifts, loss of gear, and burnt clutches. Sonnax 1-2 and 2-3 accumulator control valve kits resolve these issues and provide a firmer-than-OE shift quality. (The kit fits either of those two locations.) Additional details: * The step machined into valve spool acts as an orifice to allow full oil flow to clutches when appropriate, preventing premature clutch failure * Reinforcement retaining clip attaches to OE clip to prevent over-stroking * Spring shims allow for selective increase of apply pressure to manipulate shift quality * Annular groove helps center valve in bore to prevent future side-load wear * Drop-in Zip Valve parts install quickly and easily
Not Yet Reviewed
$11.09
Worn babbit pump bushings in your GM Powerglide, 350, 400, or Allison AT540 transmission can allow the converter hub and inner pump gear to move off-center, thus causing damage to pump gears and the pump housing crescent. You can replace the worn originals with automatic transmission oil pump bushings from Sonnax. These direct replacements have tighter tolerances for improved fit over OE units, and they're lined with highly wear-resistant PTFE to help maximize the life of the older style and increasingly rare pumps. Order the bushings recommended for your application.
( 2 )
$3.84
—
$7.95
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 9 )
$178.59
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
