Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
RAM Hydraulic Throwout Bearing Travel Adjustment Systems
RAM hydraulic throwout bearing travel adjustment systems are designed for late model vehicles equipped with internal slave cylinder and bearings. Factory hydraulic systems do not allow for adjustment of the pedal position, often resulting in a high engagement point when using aftermarket clutches. The Ram system allows you to adjust your pedal position lower to the floor for better driver comfort, while allowing you to minimize the release of your clutch system for racing applications. Some vehicles experience shifting problems at higher RPM due to over centering, or over travel of the clutch fingers. By limiting this travel and setting the clutch pedal for minimum release this over travel situation can be eliminated, restoring clean shifts at high RPM.
( 12 )
$145.00
—
$219.00
$130.50
—
$197.10
On Sale
RAM Stock Rule Clutch Systems
RAM clutches for 'stock clutch rule' classes give you unmatched performance and durability. The 10.5 in. diameter assembly utilizes a billet aluminum pressure ring with a riveted steel heat shield that provides a durable mating surface for the clutch disc. A 3,000 lb. pressure spring provides increased static pressure over stock clutches. Used in conjunction with a RAM 6-paddle solid hub disc, this combination weighs in at just over 15 lbs. If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 lbs. to the total weight of the set. RAM offers a lightweight 17 lb. billet steel flywheel for Chevrolet that matches the above components. If you are required to use all-steel components, RAM offers a similar 10.5 in. pressure plate with a nodular iron pressure ring. This unit uses the same heavier pressure spring for increased holding power. All RAM street stock clutches are completely rebuildable.
Not Yet Reviewed
$129.00
—
$855.00
$116.10
—
$769.50
On Sale
RAM Assault Weapon 90 Series Clutch Discs
RAM Assault Weapon 90 Series clutch discs are designed for use in oval track applications. They are manufactured from the patented Rametallic friction material and work only with the 6.25 in. Assault Weapon clutch systems. Floater plates are sold separately and are required for installation.
Not Yet Reviewed
$189.00
—
$569.00
$170.10
—
$512.10
On Sale
RAM Assault Weapon Clutch Kits
Bust out the big guns for your racer--RAM Assault Weapon clutch kits--and silence the competition. These multi-disc clutches offer affordable, lightweight high performance to keep you shooting smoothly in and out of the corners. Quality-built with RAMetallic friction discs, these clutch kits are available in 2-disc and 3-disc versions. Assemble your racer with pure racing Circle Track clutches backed by 25 years of track-proven, bulletproof performance, lap after lap. Choose the clutch kits preferred by champions--RAM Assault Weapon clutch kits.
( 1 )
$569.00
$512.10
On Sale
RAM Concept 10.5 Dual-Disc Organic Clutch Kits
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 7 )
$939.00
—
$1,149.00
$845.10
—
$1,034.10
On Sale
RAM Hydraulic Release Bearings
RAM hydraulic release bearings offer maximum flexibility when setting up the clutch release system in your early or late model car or truck. RAM heavy-duty hydraulic bearings use larger, more robust O-rings, providing the ultimate in durability and long life when compared to factory and other aftermarket hydraulic systems. RAM hydraulic bearings are fully adjustable and are easy to set up with most aftermarket clutches, single or dual disc. RAM hydraulic bearings are also a great choice for use in your Tremec transmission conversion. Application specific bearing kits include every fitting, line, shim and adapter needed to connect directly to the factory master cylinder. RAM also offers other bearing styles with a wider 3.150 in. bearing face needed for 3 and 6 lever clutch applications. When only the best will do, choose RAM!
( 76 )
$85.00
—
$459.00
$76.50
—
$413.10
On Sale
RAM Concept 9.5 Dual Disc Clutch Kits with Billet Flywheel
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
—
$1,700.00
$1,035.00
—
$1,530.00
On Sale
RAM Concept 10.5 Dual-Disc Metallic Clutch Kits
RAM Concept 10.5 dual-disc metallic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 1,050. RAM Concept 10.5 dual-disc metallic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 1 )
$1,279.00
—
$1,449.00
$1,151.10
—
$1,304.10
On Sale
RAM Single Disc Push-Type Conversion Camaro Firebird Clutch Kits
If you have 1993-1997 Camaro or Firebird and are tired of using the factory pull-style clutch system, RAM Clutches has the solution for you with their single disc push-type conversion Camaro/Firebird clutch kits. Each kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. The kits come in a choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations, depending on your application. Clutch kit sold separately.
( 1 )
$1,099.00
—
$1,427.00
$989.10
—
$1,284.30
On Sale
RAM 5135 Sintered Iron Drag Racing Clutch Discs
RAM 5135 sintered iron drag racing clutch discs allow the clutch to work, or "slip" as needed, in order to get the vehicle to launch smoothly without overpowering the tires. These hard compound clutch discs are designed to work in conjunction with your RAM professional drag racing clutch system to provide optimum performance.
( 6 )
$215.00
—
$279.00
$193.50
—
$251.10
On Sale
RAM Concept 9.5 Dual-Disc Organic Clutch Kits
If you have limited space or height restrictions and need the holding capacity of a dual disc clutch, the RAM Concept 9.5 is built just for you! The RAM Concept 9.5 dual-disc organic clutch kits meet the need for a smaller diameter or more compact, shorter design to fit in applications with limited bellhousing space. Building on the highly successful Concept 10.5 and Force 9.5 complete dual-disc systems, Concept 9.5 kits incorporate a billet stand design that allows the use of any RAM or other flat flywheel to facilitate installation. RAM Concept 9.5 dual-disc clutch kits feature: * 300 Series organic friction material for applications up to about 700 hp * A higher clamp load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Concept 9.5 units are ideal for applications, such as road race or autocross vehicles
Not Yet Reviewed
$939.00
$845.10
On Sale
RAM Replacement Push-On Hydraulic Throwout Bearings
RAM replacement push-on hydraulic throwout bearings are for use with single-disc stock type clutch systems. Flat-faced bearings have a maximum travel of .800 in. and (per RAM) should be used in a 3/4 in. bore master cylinder with DOT 3 non-synthetic fluid.
Not Yet Reviewed
$33.00
$29.70
On Sale
RAM Dual Disc Push-Type Conversion C4 Corvette Clutch Kits
RAM has developed these dual disc push-type conversion C4 Corvette clutch kits to replace the factory pull-style unit with a conventional single or dual disc push-style package. Each conversion kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. You have the choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations. So, if you are tired of using the factory pull-style clutch system in your C4 Corvette, these dual disc push-type conversion clutch kits from RAM can provide a viable solution. Order the RAM conversion clutch kit for your application needs.
( 1 )
$1,375.00
—
$1,700.00
$1,237.50
—
$1,530.00
On Sale
RAM Concept 9.5 Dual-Disc Metallic Clutch Kits
If you have limited space or height restrictions and need the holding capacity of a dual disc clutch, the RAM Concept 9.5 is built just for you! The RAM Concept 9.5 dual-disc metallic clutch kits meet the need for a smaller diameter or more compact, shorter design to fit in applications with limited bellhousing space. Building on the highly successful Concept 10.5 and Force 9.5 complete dual-disc systems, Concept 9.5 kits incorporate a billet stand design that allows the use of any RAM or other flat flywheel to facilitate installation. RAM Concept 9.5 dual-disc clutch kits feature: * 900 Series metallic friction material for applications up to about 850 hp * A higher clamp load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Concept 9.5 units are ideal for applications, such as road race or autocross vehicles
Not Yet Reviewed
$1,279.00
$1,151.10
On Sale
RAM Segmented Aluminum Flywheels
For single disc sintered iron clutch systems, RAM segmented aluminum flywheels are CNC machined from certified materials and exceed SFI standards. Featuring segmented steel heat shields, RAM offers several designs to cover many popular applications. Choose the one designed for your vehicle.
Not Yet Reviewed
$525.00
$472.50
On Sale
RAM Assault Weapon 70 Series Clutch Discs
RAM Assault Weapon 70 Series clutch discs are designed for use in oval track applications. They are manufactured from patented Rametallic friction material and work only with 6.25 in. Assault Weapon clutch systems. Floater plates are sold separately and are required for installation. The RAM Assault Weapon 70 Series clutch discs use riveted-on disc pads for optimum holding power.
Not Yet Reviewed
$101.00
$90.90
On Sale
RAM Force 9.5 900S Dual Disc Clutch Kits
RAM Force 9.5 900S dual disc clutch kits can handle higher torque capacities and up to 850 hp with RAM 900 Series metallic facings. The floater plate is driven from three sets of straps that eliminate any floater plate rattle at idle, and the top clutch disc features a sprung hub assembly that absorbs the initial engagement of the clutch and reduces the chance of chatter on takeoff. Depending on the application, Force 9.5 900S kits are compatible with factory hydraulic release mechanisms and all factory master cylinder systems when used in conjunction with a RAM hydraulic release bearing. What's the best entry-level dual-disc setup for the street? It's the added torque capacity of RAM Force 9.5 900S dual disc clutch kits.
Not Yet Reviewed
$1,480.00
$1,332.00
On Sale
RAM Single Disc Push-Type Conversion C4 Corvette Clutch Kits
These RAM single disc push-type conversion C4 Corvette clutch kits are designed to replace the pull-style clutch and dual mass flywheel in your factory 1989-96 C4 Chevrolet Corvette. They consist of an aluminum flywheel, a high-clamp Borg and Beck-style pressure plate with a 2,800 lb. clamp load, and a RAM 300 Series organic clutch disc. The RAM single disc push-type conversion C4 Corvette clutch kits use an internal hydraulic throwout bearing, replacing the factory release mechanism, to complete the install. Best of all, these clutch kits are capable of handling up to a 700 hp holding capacity.
( 3 )
$1,099.00
—
$1,427.00
$989.10
—
$1,284.30
On Sale
RAM Powergrip HD Clutch Kits
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 24 )
$1,427.00
$1,284.30
On Sale
RAM 300 Series Clutch Discs
Ram 300 Series clutch discs feature a polyurethane-encapsulated sprung hub to handle higher shock loading than standard discs. They also have premium, non-asbestos, organic facings bonded to a steel backing for better heat dissipation and greater strength. Available with a flat carrier (300 Series race) or a marcel carrier (300M Series) for reduced chatter and smooth engagement, they work great for race or Hot Street applications.
( 5 )
$159.00
—
$209.00
$143.10
—
$188.10
On Sale
RAM 200 Series Clutch Discs
RAM 200 Series clutch discs deliver drivability with performance. They're designed for mild horsepower increases in vehicles that are street-driven, where drivability is an important factor. The 200 Series features organic woven friction material that provides smooth engagement and a high level of driver comfort in operation. Order the model recommended for your vehicle and engine application.
( 7 )
$139.00
$125.10
On Sale
RAM 900 Series Clutch Discs
RAM 900 series clutch discs are high-tech alternatives for both early and late model performance vehicles. They have an 8-spring hub with "poly-coil" springs for extreme damping capabilities and they use sintered-iron friction material borrowed from RAM's Pro Stock and Pro Mod units. These clutch discs deliver an extremely high coefficient of friction, but allow a limited amount of slip on engagement so that you don't overpower the tires. They're recommended for severe street duty and strip use, where street drivability isn't a high priority. Do not use them with an OE flywheel.
( 2 )
$300.00
$270.00
