Availability
These Race Ramps Trak-Jax ramps were inspired by an autocross racer who didn't want to buy new, high-priced, low-profile jack equipment just to change tires. They are manufactured from composite foam and are low enough to get even the lowest cars up high enough to use a standard floor jack. At less than 5 lbs. each and only 30 in. long, Race Ramps Trak-Jax ramps can even fit nicely in your trunk.
( 25 )
$141.65
Reduce the stress and effort of hauling your low-riding car with Race Ramps Trailer-Mates! Race Ramps Trailer-Mates raise your low ground clearance vehicle for easy tie-down on a transport trailer. These ramps provide an additional 3 in. of clearance, making it much easier to reach your vehicle's tie-down points and to open the door over trailer wheelwells. Concave depressions in these Trailer-Mates' front sections secure your car to prevent rolling during transport. These extremely durable and lightweight ramp systems won't scratch or slide on your trailer's surface. They're ideal for vehicles with tires up to 12 in. wide.
( 7 )
$238.40
—
$264.34
Race Ramps Sport Ramps are ideal for use with small sports cars that don't have low front-ends. These ramps accommodate cars with tires up to 8 in. wide and raise your car up 7 in. For increased safety, the use of wheel chocks is recommended with all Race Ramps products.
( 8 )
$198.50
Superwinch offers their synthetic ropes in a variety of lengths and widths to best suit your application. These ropes are made from genuine AmSteel-Blue with Samthane, a special coating that helps to resist abrasion. The raw material in AmSteel-Blue is Dyneema SK-75 HMPE fiber, which is the world's strongest fiber! Superwinch synthetic ropes are designed to outlast wire 3:1, with extremely low stretch and superior flex, fatigue, and wear resistance. Superwinch synthetic ropes allow you to winch with confidence!
( 1 )
$114.99
—
$141.99
ARB Hawse fairlead spacer kits will stabilize the cables during tough or angled pulls. The spacers reposition the fairlead to prevent rubbing of the cables and are made to fit recessed/offset holes. They feature a PU coating and a reflective tape trip for durability and visibility in low light.
Not Yet Reviewed
$139.95
KFI Products winch cable extensions are made of synthetic fiber rope which has a higher breaking strength than that of steel cable and it is lighter. These extensions are for your pre-existing winch cable. Features: * 7,700 lbs. minimum break strength * 15/64 in. x 50 ft. long * High-strength SK75 dyneema * Heavy-duty nylon eye guard for hook or shackle * Durable metal thimble for attaching a hook or looping the rope * Very low stretch * No kinks, curls, rust, or splinters * Safe and easy to handle * Floats in water * Lightweight * Includes sliding 5 ft. protective sheath to protect against rough or sharp surfaces * Perfect for all your winching needs
Not Yet Reviewed
$115.50
For added safety and stability, Ultra-Fab Products Ultra Sidewind swivel marine tongue jacks are a perfect solution when looking to add or replace a worn jack on your boat or cargo trailer. Made with all steel gears, the Ultra Sidewind marine jacks use heavy-duty steel, and a no-slip worm gear jacking mechanism. The jack has a 1,000 lb. lift capacity, E-Z grip rotating handle for raising and lowing the attached wheel, along with a universal mounting flange, and all the hardware needed to make for an easy installation.
Not Yet Reviewed
$104.66
BulletProof Hitches Heavy-Duty 1 in. x 30 ft. kinetic recovery rope is the ultimate choice for all your serious recovery needs—and has been designed for strength, durability, and reliability. It's a 100 percent double-braided nylon rope that is UV- and water-resistant. Each rope is rated to a breaking strength of 33,900 lbs. and comes in BulletProof's signature black color with red loops for higher visibility, especially in low light conditions. With a stretch factor of up to 30 percent of their original length, the ropes are designed to assist in the recovery of one-ton trucks, large SUVs, small tractors and RVs that are stuck and may require being pulled out. They're stronger than wire ropes and will not snap during towing. Heavy-Duty kinetic recovery ropes are designed to withstand the toughest situations and terrains—and can hold up in the harshest of conditions.
Not Yet Reviewed
$224.95
The Weigh Safe Aero trailer hitch ball mounts feature a streamlined, sleek design all while incorporating Weigh Safe's signature built-in gauge that measures tongue weight, so you never have to worry about an unbalanced and unsafe load again. The Weigh Safe Aero trailer hitch ball mounts are competitively priced and built-to-last. They are constructed of high-strength steel with a stainless steel tow ball and offer easy height adjustability for any trailer size. Support your towing setup with these Weigh Safe high-quality towing accessories and experience the ultimate in "Towing Peace of Mind" you can trust for many years to come. Key features: * Hitch is constructed of high-grade steel with a stainless steel tow ball and offers easy height adjustability * Available in options with various drop lengths (4 in., 6 in. 8 in. and 10 in.) and a 2 in. receiver size to accommodate different towing needs and vehicle configurations—please specify application when placing your order * The adjustable design allows you to fine-tune the hitch height to match the trailer's hitching point, ensuring a level tow and preventing the trailer from being too high or low * Adjusts in 1 inch increments so you get the perfect position for trailer height * Incorporates a built-in scale that accurately measures tongue weight, which is the weight of the trailer that presses down on the tow vehicle's hitch, this helps to ensure proper weight distribution and prevents excessive sway * Provides an effective way to ensure safety while towing * Many models feature a black powdercoat finish with a zinc undercoating for added protection against rust and corrosion, especially important in wet or snowy conditions Note: While a weight distribution hitch improves towing, it doesn't increase the hitch's towing capacity; it allows you to use your hitch to its full potential.
Not Yet Reviewed
$149.00
—
$239.00
The CURT Spectrum trailer brake controller gives you powerful, precise braking operation in an extremely simple and subtle design inside your vehicle. It features an LED-equipped, rotary knob interface and a separate main module with an advanced accelerometer. This allows for an OE look and feel to be maintained inside the cab of your vehicle. The separated design of the Spectrum brake control allows the main module to be mounted behind the dash of the vehicle, completely out of sight. Meanwhile, the compact, unobtrusive interface can be fully integrated into the dash with just a single hole. The interface of the Spectrum trailer brake controller is simple but powerful. It is a single rotary knob with a push-button in the center that allows the driver to adjust brake power output. It is equipped with ten tri-color LEDs (red, blue, and green) to show the automated power output of the control. There is no need for a separate display or additional controls, keeping the dash of your vehicle clean, professional, and uncluttered. Behind the Spectrum brake controller is a powerful main module with a triple-axis motion-sensing accelerometer. This advanced circuit can detect the inertia of the vehicle and trailer on all axes of three-dimensional space. Whatever your speed and whatever grade you are travelling on—up hill or down--the Spectrum brake control produces the exact amount of power needed for a smooth, safe stop every time. The main module can be mounted with the included mounting brackets or adhesive patch. The Spectrum electric brake controller is a fully compatible unit, able to operate up to eight trailer brakes at a time. It can be used on vehicles with ABS brakes and cruise control, and it works with low-voltage and PWM systems. It installs in ten minutes or less, using a quick-plug harness that is vehicle-specific and plugs into any CURT brake control for a custom-fit installation in the vehicle. The Spectrum also has automatic leveling and calibration features to simplify the setup process.
( 12 )
$259.95
Introducing the CURT Discovery NEXT, a powerful, compact, and intuitive brake controller designed to provide reliable operation of your electric trailer brakes from the comfort of your vehicle's cabin. With its sleek and modern design and a low-profile bracket for enhanced clearance, this controller offers exceptional control. Manage 2-8 trailer brakes at a time (1-4 axles) with fully adjustable settings that effortlessly adapt to your unique vehicle-trailer configuration. The Discovery NEXT is an upgraded and enhanced version of CURT's renowned Discovery brake controller. It boasts compatibility with low-volt, PWM, ABS, cruise control, and electric over hydraulic brakes. The slim profile combines functionality with a modern aesthetic, ensuring powerful brake control at your fingertips without overpowering your vehicle's dashboard. Easily monitor your brake settings at-a-glance, thanks to the LED display that showcases power adjustments in 0.5 increments. The display also offers full-text diagnostics, simplifying troubleshooting, while the adjustable brightness ensures optimal visibility during day or night towing. Additionally, the included unique mounting bracket further enhances clearance, maintaining an unobtrusive installation. Equipped with a time-delay feature, the Discovery NEXT brake controller allows for fully adjustable power and ramp time. With a selection of 10 gain settings and nine load settings, you can fine-tune the controller to match your specific towing needs precisely. The ramp-up progress is clearly indicated through LED indicators, and the brightness can be adjusted to suit daytime or nighttime towing conditions. Setting up this time-based brake controller is fast and straightforward, as it has no internal moving parts and requires no leveling. It offers versatile mounting options, allowing installation anywhere within your vehicle and at any desired angle. For easy plug-and-play installation, CURT recommends using one of its brake controller wiring harnesses (sold separately). This bulk package includes six Venturer NEXT brake controller units.
( 3 )
$108.95
Rage Powersport carrier swing-away arms create easy access to the rear hatch and trunk. Engineered for use with Silver Spring scooter and wheelchair carriers, the arms simply swing the entire unit away, to the side with the carrier unloaded. They are designed for low-to-ground vehicle hitch tubes, so the hitch adapter configuration allows up to a 7 in. rise (4 in. with the hitch adapter and 3 in. with the carrier adapter). The swing-away kits also provide clearance for a spare tire with an 8 5/8 in. distance from the hitch pin hole to carrier with the carrier folded upright and 17 1/8 in. when the carrier is unfolded. Features: * Manufactured from durable, powdercoated steel * Swings scooter carrier to the side of vehicle * Allows rear vehicle access for hatches and spare tires * Hitch adapter configuration enables up to a 7 in. rise * Carrier must be unloaded for proper swing-away operation * Includes a 1-year warranty
( 3 )
$190.00
Finally, there's a solution to avoid front-end damage to your low-riding car when getting it onto a service platform or lift! These Race Ramps Rack Ramps are available in two styles. Rack-4 Ramps weigh only 10 lbs. each and are for a lift that has the ramps permanently attached. They have a notch in them to accommodate the existing ramp and decrease the angle of approach by making the slope longer. Rack-5 Ramps weigh only 10 lbs. each and are made for the 4-post lift with removable ramps. These ramps have a lip that bridges over the operating rods or cables that run in front of the steel beam. For increased safety, use wheel chocks with all Race Ramps products.
( 6 )
$224.44
Superwinch LT3000 ATV winches offer you power, performance, and price. These ATV winches are compact, quiet, and durable. These LT3000 ATV winches are constructed with a low-amp, permanent magnet motor protected by a circuit breaker. They provide great pulling power with reliable performance, making them an excellent value for budget-conscious individuals. Whether you use them on your ATV or UTV, Superwinch LT3000 ATV winches offer the biggest performance bang for your dollar.
( 8 )
$224.99
Looking for a safe and reliable way to recover your vehicle when off-roading? OVS has several solutions that will help you get back on the trail quickly and safely. Overland Vehicle Systems soft shackle/recovery ring combo kits are the ultimate must-haves for your Overland or off-road rig. Available in 5/8 in. or 7/16 in. diameters, the soft shackles are made of Dyneema, a low-friction braided synthetic which has a much higher strength-to-weight ratio than steel. They are offered with a steel collar or a diamond knot with a UV-stable protective sleeve. OVS recovery rings are precision machined from 6061 T-6 aircraft-grade aluminum that will not rust of corrode, and when paired with an OVS soft shackle they are the safest and the most convenient recovery tools on the trail. Choose the combo you prefer to add to your recovery arsenal.
Not Yet Reviewed
$104.98
Great Day LoadLite Max Arch ramps make it possible to load your lawnmowers and low-clearance ATVs with ease. Low-deck clearance is a problem when trying to load and unload your machines. The innovative arched design of these Great Day LoadLite ramps solves that problem, plus Max Arch ramps feature aircraft aluminum construction fitted with safety tie-downs and plastic covered holding fingers that resolve your dependability and safety concerns. The two panels together provide an unbelievable 1,500 lbs. of holding power. When your ATV, UTV, or lawnmower calls for low-deck clearance, Great Day answers that call with the American craftsmanship of their LoadLite Max Arch ramps.
Not Yet Reviewed
$310.00
Making your RVing experiences more enjoyable, Ultra-Fab Products Eliminator II front-to-back stabilizing systems are a universal fit automatic stabilizer for RV travel trailer scissor jacks. The Eliminator II stabilizing systems innovative design is a permanent installation, automatically moving into place when lowering the jacks, and requires no additional adjustments under normal use. Features and benefits: * Includes all brackets and hardware * Attaches one scissor jack to frame on any trailer corner * No additional locking devices needed * Greatly reduces side-to-side movement * Attaches to all scissor jacks, except BAL low-profile style * 1-year warranty
Not Yet Reviewed
$194.94
Making your RVing experiences more enjoyable, Ultra-Fab Products Eliminator II side-to-side stabilizing systems are a universal fit automatic stabilizer for RV travel trailer scissor jacks. The Eliminator II stabilizing systems innovative design is a permanent installation, automatically moving into place when lowering the jacks, and requires no additional adjustments under normal use. Features and benefits: * Includes one cross bar and hardware * No additional locking devices needed * Greatly reduces side-to-side movement * Attaches to all scissor jacks, except BAL low-profile style * 1-year warranty
Not Yet Reviewed
$194.94
Thule JawGrip watercraft paddle racks are multipurpose holders for carrying paddles, oars, masts, or any other long adventure gear. They work by track mounting into the top channel of racks that use a Euro channel. Features: * Securely holds up to two full-size paddles, oars, or masts * T-track mounting system quickly attaches to Thule WingBars, AeroBlades, Xsporter, and TracRac load bars (adapter required for Thule square bars) * Sleek design and low-profile reduces noise and drag * Individual straps allow for a snug fit on each side of the holder * Durable, rubber padding protects paddles, oars, and masts during transit * Easily carry a surfboard alongside using the Thule Surf Pads (sold separately)
Not Yet Reviewed
$109.95
Mile Marker electric winches deliver the value and pulling power that you need, when you need it most! They rely on powerful 3-stage planetary gear sets with ratios running from 159:1 all the way up to 265:1 to produce the serious oomph that you're after. That results in line-pull ratings as low as 3,000 lbs. and as high as 12,000 lbs., depending on the winch model. With faster line speeds, lower amp draw, and features like integrated kill switches and "no chrome construction," these electric recovery winches can handle any job imaginable. Mile Marker electric winches give you industry-best performance at a price that won't leave you stuck.
Not Yet Reviewed
$144.99
The Steel 180 Pro Turnover hitches is Weigh Safe's most versatile ball mount yet! With its double-sided tow ball slider, switching between tow ball sizes has never been easier. The hitch features receiver capabilities directly on the front of the ball mount for endless accessory possibilities (not to be used with recovery products, ball mounts, tow balls, or hitches of any kind). Available in 6 in. and 8 in. drop lengths and 2 in. and 2.5 in. receiver sizes, the Steel 180 Pro can also be used in both the rise and drop positions, offering the ultimate range of height adjustability. Select the Weigh Safe Steel Pro turnover hitches for your application needs. Key features: * Constructed of high-strength steel with a black powdercoated finish * The Steel 180 Pro is rated up to 25,000 lbs. max gross trailer weight and 2,500 lbs. max tongue weight * The adjustable design allows you to fine-tune the hitch height to match the trailer's hitching point, ensuring a level tow and preventing the trailer from being too high or low * Adjusts in 1 inch increments to get the perfect position for trailer height * Dual pin key lock assembly included * Rise—all hitches may be used in rise position—gain 1 inch (e.g., 4 in. drops are 5 in. rises) * Total height—add 3 inches (e.g., 4 in. drops measure 7 in. from the top of the receiver to the hitch base) * 5/8 in. diameter hitch pin hole
Not Yet Reviewed
$274.00
Weight Safe hitch balls feature an easy-to-use, built-in scale that measures your trailer's tongue weight every time you tow. So, if the scale indicates that your tongue weight is too low or too high, you can adjust it before you head out on the road, giving you peace of mind to complete your journey in a safer manner. The hitch balls provide a connection point for your trailer's coupler (works with 2 in. and 2 5/16 in. couplers) and the magnetic ball adapter piece clamps on for quick use. The units' stainless steel construction offers far greater protection against rust and corrosion and stainless steel shank is heat-treated for superior strength and durability. Weigh Safe hitch balls meets VESC V-5 regulations and are SAE J684 certified.
Not Yet Reviewed
$269.00
MAXTRAX recovery kit bags are designed and engineered for sand, dirt, and snow. Featuring heavy-duty, triple-layer, weather-resistant, PVC coated 600D polyester construction, these bags are functional, stylish, and able to hold all your recovery gear. Lined inside with durable polyester material, the large internal cavity is ideal for all your MAXTRAX ropes, while the five external pockets are great to store and maximize access to components of your system, including shackles and a winch ring. MAXTRAX recovery kit bags come with removable shoulder strap, handles, and two external cylindrical pouches for the MAXTRAX hitch or hydration storage. These all-purpose bags, with a low center of gravity and rectangular footprint, are modular and stackable, and can be used in many other ways, like a gym bag, overnight bag, or food storage. Dimensions when filled are approximately 23.62 in. (600mm) L x 15.74 in. (400mm) W x 9.45 in. (240mm) H.
Not Yet Reviewed
$159.99
Mac's VersaTie Series 4 track pre-drilled kits offer their patented VersaTie cut, drilled, countersunk, and complete with hardware. Ready for installation and use, the Series 4 kits feature flexible tie-down points with the low profile of a recessed track, and the added protection of a surface flange to cover the cut edges for a clean finish. They work particularly well on coated trailer surfaces to protect the free edges from delamination. Siers 4 kits are available in several track lengths. Mac's VersaTie Series 4 kits include: * Two pre-drilled VersaTie tracks * Single-stud tie-down rings * Stainless steel mounting hardware
Not Yet Reviewed
$107.95
—
$143.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
