Tools & Shop Equipment
Availability
Every automotive enthusiast and professional mechanic knows that it’s nearly impossible to get the job done without the right tools. That’s why Summit Racing is your...
Every automotive enthusiast and professional mechanic knows that it’s nearly impossible to get the job done without the right tools. That’s why Summit Racing is your place to go for garage equipment, specialty tools, and everyday problem solvers. We have everything a well-stocked shop needs: a huge selection of hand tools, powerful air tools and compressors, welding equipment and plasma cutters, engine stands, jacks, dollies, and much more. Looking for a place to put all of your new toys? We have the tool cabinets and storage solutions you need to keep it all organized!
Every automotive enthusiast and professional mechanic knows that it’s nearly impossible to get the job done without the right tools. That’s why Summit Racing is your place to go for garage equipment, specialty tools, and everyday problem solvers. We have everything a well-stocked shop needs: a huge selection of hand tools, powerful air tools and compressors, welding equipment and plasma cutters, engine stands, jacks, dollies, and much more. Looking for a place to put all of your new toys? We have the tool cabinets and storage solutions you need to keep it all organized!
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 10 )
$99.99
The NOCO GENIUS2D smart battery charger is one of the most powerful, highest performing, energy-efficient and compact chargers yet. GENIUS2D is a 2-amp direct-mount battery charger and battery maintainer engineered to be securely mounted nearby the battery. This all-new, next-generation battery charger from NOCO is the next step in battery charging and maintenance technology. Features include: * Designed for 12 V lead-acid batteries, including most flooded, gel, AGM, and maintenance-free; as well as automotive, marine, RV, and deep-cycle batteries * The perfect battery maintainer for daily battery maintenance or long-term storage of cars, boats, trucks, RVs, and equipment—plus, suitable for charging ATVs, wave runners, lawn mowers, and more * Engineered to be securely mounted nearby the battery with its rugged snap-fit mounting bracket; effortlessly installs into most materials with truss-head self-tapping screws * Integrated thermal sensor to maximize battery life; automatically compensates charging for both cold and hot environments * Includes a 2-amp direct-mount battery charger and battery maintainer with a 24 in. Type-A A/C cable and 24 in. D/C cable with eyelets; plus a mounting bracket, self-tapping truss-head screws, and user guide—all covered with a 3-year hassle-free warranty.
( 5 )
$39.95
The right weight distribution enhances performance on the track. With a large, easy-to-read display of weights and percentages, Intercomp SW500 E-Z Weigh scale systems provide you with the data to become a front runner. They allow you to view any combination of scale pad weight and percentages, calculate center of gravity, check baseline setup, store 100 chassis setups, and display setups to .01 of a percent for an almost perfect chassis setup. Intercomp Racing SW500 E-Z Weigh scale systems include strong T-6061 aluminum scale pads, cabled indicator with large backlighted display characters, case, and a standard 9-volt battery. Go racing with Intercomp.
( 16 )
$1,695.00
—
$1,895.00
Completely modular, the ARB Outback Solutions range of roller drawer systems can be individually tailored to your needs and vehicle. Exclusive to ARB and suitable for many vehicles—including SUVs, pickups, and trailers—these systems can also be used in non-vehicle applications such as sheds and warehouses. Three types of modules are available: roller drawer, roller floor, and roller drawer with roller floor. They're offered in a range of sizes, resulting in more than 200 possible configurations. Customize your vehicle or storage area! Additional product details: * Engineered for both on and off-road driving with anti-rattle design * Key lockable, push-pull slam shut latches for ease of use and maximum security * Long-lasting, UV-stable commercial carpet designed to complement modern vehicle interiors * Cross-folded floor ensures maximum support for items placed within each unit. Up to a maximum of 330 lbs. per drawer, 600 lbs. combined * Fully sealed, dust- and water-resistant bearings for superior longevity working in harsh environments * Integrated fridge slides on roller floor models provide a true flat mounting surface * Vehicle-specific side floor kit with easy latches completes installation and provides additional storage areas within the cabin or tray * Water-resistant bonded marine plywood with steel reinforced guards for superior strength sourced from sustainable forests * Folded stainless steel bearing runners for ultra-smooth drawer and slide operation * Self-locking anti-rollback system locks into place at full extension; this holds the drawer from rolling closed even on inclines * Modular units allow greater flexibility if needs change in the future * Class-leading deep drawers with internal heights up to 9.8 in. for greater packing potential
( 1 )
$791.00
—
$1,563.00
Armadillo Tough 2-door cabinets offer organizational flexibility with three interior shelves. With a visual lock-unlock indicator, the locking doors open to a spacious storage cabinet with two adjustable and one fixed shelf. The two adjustable shelves can be removed if additional space is needed for larger items. Designed to make organization simple for garages and workshops, these cabinets are made with heavy-duty 21-gauge steel for strength. The scratch- and stain-resistant powdercoat paint finish protects the cabinets from everyday heavy use. Cabinets include a runner tool mat top, leveling feet, a rear cable grommet for power sources, and easy-grip inset handles on each cabinet side. Additional notes: * Total weight capacity 600 lbs. * Shelf weight capacity 150 lbs. * One removable shelf, adjustable in 1 in. increments * One cable management access hole in back * Heavy-duty rubber tool mat
( 1 )
$329.99
Armadillo Tough multi-function cabinets offer organizational flexibility with one self-closing drawer and two lockable doors. The drawer can hold up to 50 lbs. while riding on soft-closing, jam-free, and full-extension runners. The locking doors open to a spacious interior cabinet with one fixed and one adjustable shelf that can be removed if additional space is needed for more oversized items. Designed to simplify organization in garages and workshops, each cabinet is constructed from heavy-duty 21-gauge steel for maximum strength and durability. Scratch- and stain-resistant powdercoat paint finish protects the cabinets from everyday heavy use. The adjustable steel shelf allows you to store items of all sizes, while the soft-close drawer and drawer liner prevent things from shifting when closing. Fully lockable doors with visual lock-unlock indicators ensure that your gear stays safe. Multi-function cabinets have a runner tool mat top, leveling feet, a rear cable grommet for power sources, and easy-grip inset handles on each cabinet side. Upgrade your unit with a solid wood top or add mobility with multi-direction steel wheels (not included). Product details: * Total weight capacity 600 lbs. * Drawer weight capacity 50 lbs. * Shelf weight capacity 150 lbs. * Visual lock-unlock indicator * Soft/self-closing drawers * EVA drawer liners * One removable shelf, adjustable in 1 in. increments * One rear cable management access hole * Inset side handles on both cabinet sides * Heavy-duty rubber tool mat * Leveling feet * Available in black, gray, or red
Not Yet Reviewed
$369.99
Armadillo Tough 3-drawer 2-door cabinets offer organizational flexibility with three cushioned and soft-close tool drawers. Each of the three tool drawers slides on soft-close, quiet, and jam-free full-extension runners. Two locking doors open to a spacious interior with two adjustable and one fixed shelf. The locking doors come with a visual lock-unlock indicator. The two adjustable steel shelves can be removed if additional space is needed for more oversized items. Designed to make organization simple for garages and workshops, these cabinets are made with heavy-duty 21-gauge steel for strength. The scratch- and stain-resistant powdercoat paint finish protects the cabinets from everyday heavy use. Cabinets also include a runner tool mat top, leveling feet, a rear cable grommet for power sources, and easy-grip inset handles on each cabinet side. Additional notes: * Tool storage and levelers * Total weight capacity 600 lbs. * Drawer weight capacity 50 lbs. * Shelf weight capacity 150 lbs. * Visual lock-unlock indicator * Soft/self-closing drawers * EVA drawer liners * One removable shelf, adjustable in 1 in. increments * One rear cable management access hole * Inset side handles on both cabinet sides * Heavy-duty rubber tool mat * Available in black, gray, or red
Not Yet Reviewed
$429.99
Armadillo Tough 6-drawer tool cabinets are ideal for storing all your hand-held tools. All six lockable drawers slide on soft-close, quiet, and jam-free full-extension runners. Steel walls offer added strength and durability. The no-slip rubber tool mat top provides the perfect surface to place tools or work on big or small projects. Designed to simplify organization in garages and workshops, 6-drawer cabinets are constructed with heavy-duty 21-gauge steel for strength. The scratch- and stain-resistant powdercoat paint finish protects the cabinets from everyday heavy use. Units have six fully lockable doors, each with a visual lock-unlock indicator that further covers your tools. They also include leveling feet and easy-grip inset handles on each cabinet side. Additional details: * Total weight capacity 600 lbs. * Top drawers weight capacity 50 lbs. * Bottom drawer weight capacity 100 lbs. * Visual lock-unlock indicator * Soft/self-closing drawers * EVA drawer liners * Heavy-duty rubber tool mat
Not Yet Reviewed
$499.99
The right weight distribution enhances performance on the track. With a large, easy-to-read display of weights and percentages, Intercomp SW500 E-Z Weigh Kart scale systems provide you with the data to become a front runner. They allow you to view any combination of scale pad weight and percentages, calculate center of gravity, check baseline setup, store 100 chassis setups, and displays setups to .01 of a percent for an almost perfect chassis setup. Intercomp Racing SW500 E-Z Weigh Kart scale systems include strong T-6061 aluminum scale pads, cabled indicator with large backlighted display characters, case, and a standard 9-volt battery. Go kart racing with Intercomp.
( 4 )
$1,395.00
When you're using the innovative ICEngineworks system to design and fabricate exhaust headers, these 1875 Series Collector Dummies are valuable accessories to position your exhaust collector in the engine bay. Just clamp, spot weld, or bolt the Dummy in the space reserved for the exhaust collector, and then construct each "plastic pattern" 1 7/8 in. header runner with a precisely defined end point. The 1875 Series Collector Dummies are available as 3-into-1 (three 1 7/8 in. OD pipes into one collector) or 4-into-1 models, sold individually or in pairs. Together with the ICEngineworks design block, cutting, and welding tools, these groundbreaking systems allow you to build complete exhaust headers in a fraction of the time!
Not Yet Reviewed
$99.00
When you're using the innovative ICEngineworks system to design and fabricate exhaust headers, these 1750 Series Collector Dummies are valuable accessories to position your exhaust collector in the engine bay. Just clamp, spot weld, or bolt the Dummy in the space reserved for the exhaust collector, and then construct each "plastic pattern" 1 3/4 in. header runner with a precisely defined end point. The 1750 Series Collector Dummies are available as 3-into-1 (three 1 3/4 in. OD pipes into one collector) or 4-into-1 models, sold individually or in pairs. Together with the ICEngineworks design block, cutting, and welding tools, these groundbreaking systems allow you to build complete exhaust headers in a fraction of the time!
Not Yet Reviewed
$99.00
When you're using the innovative ICEngineworks system to design and fabricate exhaust headers, these 2000 Series Collector Dummies are valuable accessories to position your exhaust collector in the engine bay. Just clamp, spot weld, or bolt the Dummy in the space reserved for the exhaust collector, and then construct each "plastic pattern" 2 in. header runner with a precisely defined end point. The 2000 Series Collector Dummies are available as 3-into-1 (three 2 in. OD pipes into one collector) or 4-into-1 models, sold individually or in pairs. Together with the ICEngineworks design block, cutting, and welding tools, these groundbreaking systems allow you to build complete exhaust headers in a fraction of the time!
Not Yet Reviewed
$99.00
When you're using the innovative ICEngineworks system to design and fabricate exhaust headers, these 1625 Series Collector Dummies are valuable accessories to position your exhaust collector in the engine bay. Just clamp, spot weld, or bolt the Dummy in the space reserved for the exhaust collector, and then construct each "plastic pattern" 1 5/8 in. header runner with a precisely defined end point. The 1625 Series Collector Dummies are available as 3-into-1 (three 1 5/8 in. OD pipes into one collector) or 4-into-1 models, sold individually or in pairs. Together with the ICEngineworks design block, cutting, and welding tools, these groundbreaking systems allow you to build complete exhaust headers in a fraction of the time!
Not Yet Reviewed
$99.00
Knipex offers Big Twin-Move tool cases in two sizes and styles. Order the model best suited for your needs. Product features for model 00-21-41-LE: * Integrated rollers and telescopic handle * Heavy-duty ABS material; black * All-round aluminum frame and firmly mounted sturdy center board; each side offers multi-purpose push-in facilities by elastic loops and 12 small pockets * Pull-out handle embedded in the base and two external smoothly running skate wheels * 66 lb. maximum load * Can be opened on one or both sides (V form); base tray and cover can be partially or fully opened independently of each other; stands securely in all opening positions; the special runners are easy on the floor and ensure stability * Lockable * Removable document compartment and removable tool panel with 13 tool pouches Product features for model 00-21-40-LE: * Heavy-duty ABS material; black * Sturdy aluminum frame with D-shape rings for belt and fix; sturdy center board with multi-purpose push-in facilities by elastic loops and 12 small pockets * Metal hinges * 66 lb. maximum load * Can be opened on one or both sides; bottom tray and cover can be opened independently * Stands stable in any opening position due to lid-holders and hinge mechanisms on both sides that register in a position of 45 and 90 degrees * 3-digit lock and two flip-locks for fixation of the cover * Removable document compartment and removable tool board, with 13 push-in compartments on one side * Two flip-locks to fix the bottom * Base tray (height 58mm) can be subdivided by flexible inserts; cover plate with six large push-in compartments can be fixed by popper
Not Yet Reviewed
$556.99
Spanner wrenches are a must-have tool for adjusting your coilover shock absorbers. RideTech's wrenches grip the retainer under the spring to spin it and adjust the coil spring up or down. By loosening the small bolt holding the collar, you can turn it with the wrench; no need to unbolt the top of the shock. Correct adjustment of the coil spring preload is a critical step toward improved suspension and handling. RideTech machined spanner wrenches can be used manually or as an attachment on your 3/8 in. ratchet.
( 16 )
$20.00
On Sale
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
$541.44
—
$654.49
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
Proforged Dodge A/B/E-body ball joint removal tools are must-haves for any Dodge enthusiast to make the installation and removal of replacement ball joints a breeze. They're machined from high-strength steel for durability and will accept a standard 1/2 in. drive. This fits the needs of the home shop better than many other ball joint sockets, which have a 3/4 in. drive. If you own a Dodge, then you definitely need one of these tools!
( 35 )
$44.95
Manufactured by Excel from Richmond, these axle seal installation tools are designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal. The different inner and outer diameters of the puck part of the tool press can be used on many different seals. This superior quality tool provides more efficiency to save you time and is available in several models to work on a broad range of applications, including Dana 30, 44, 50, 60 and Dana 44 ICA. Choose the axle seal installation tool in the model designed for your application needs.
( 1 )
$79.99
RideTech AirPod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon RideTech AirPod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$165.00
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 76 )
$7.95
On Sale
Yukon Gear & Axle inner axle side seal installation tools ease the frustration of getting your axle seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your Dana axles with the right tools--Yukon Gear & Axle inner axle side seal installation tools.
( 9 )
$221.99
$188.69
On Sale
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
$148.74
On Sale
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$121.99
—
$164.99
$103.69
—
$140.24
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
