Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Tools & Shop Equipment
Availability
Automotive Tools, Garage Tools & Shop Equipment
Every automotive enthusiast and professional mechanic knows that it’s nearly impossible to get the job done without the right tools. That’s why Summit Racing is your...
Every automotive enthusiast and professional mechanic knows that it’s nearly impossible to get the job done without the right tools. That’s why Summit Racing is your place to go for garage equipment, specialty tools, and everyday problem solvers. We have everything a well-stocked shop needs: a huge selection of hand tools, powerful air tools and compressors, welding equipment and plasma cutters, engine stands, jacks, dollies, and much more. Looking for a place to put all of your new toys? We have the tool cabinets and storage solutions you need to keep it all organized!
Every automotive enthusiast and professional mechanic knows that it’s nearly impossible to get the job done without the right tools. That’s why Summit Racing is your place to go for garage equipment, specialty tools, and everyday problem solvers. We have everything a well-stocked shop needs: a huge selection of hand tools, powerful air tools and compressors, welding equipment and plasma cutters, engine stands, jacks, dollies, and much more. Looking for a place to put all of your new toys? We have the tool cabinets and storage solutions you need to keep it all organized!
Showing In Stock Items. Show All 76 Items.
ICT Billet Engine Block Torque Plates
Torque plates are bolted to the block deck while honing to simulate the stress applied to the bores when the heads are installed. If a cylinder is bored without a plate, once the head is installed, the bore will no longer be round at the top. Almost all factories routinely do this, as well as most engine shops. But torque plates allow an engine to break in faster, use less oil, and produce a little more power due to better ring sealing. ICT Billet engine block torque plates are specific to engine families and use factory length head bolts and studs. They are made from aerospace-grade billet aluminum.
( 17 )
$369.99
Sunex Tools Crankshaft Turning Sockets
Sunex Tools crankshaft turning sockets are a necessity for engine building. These non-marring aluminum metal sockets are available for several applications to assist you in turning the crank while adjusting valve lash and piston-to-valve clearance. Give your engine build a good turn with help from Sunex Tools crankshaft turning sockets.
( 56 )
$21.99
Moroso Crankshaft Socket Tools
Moroso crankshaft socket tools are designed to simplify the task of crankshaft rotation during short block assembly with the balancer removed. They're manufactured of tool quality steel with a durable gold iridite finish.
( 2 )
$55.99
ICT Billet Engine Stand Bolt Kits
ICT Billet engine stand bolt kits keep your engine secured during your rebuild. These steel bolts are zinc plated and are offered in SAE and metric for small block and big block Chevys and LS engines.
( 3 )
$25.99
—
$29.99
Moroso Universal Harmonic Balancer Installation Tools
Moroso universal harmonic balancer tools use a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline, for a bind-free installation. Using a thrust bearing and protective washer, the drive nut can rotate freely, allowing the balancer to be pressed on easily.
( 46 )
$71.99
COMP Cams Compound Angle Piston Vises
Make piston work easier with COMP Cams compound angle piston vises. These vises possess a unique compound angle feature; they rotate the piston not only from front to back, but also from side to side—a definite must for Ford and big block Chevy pistons! Made from aluminum and blue anodized, COMP Cams piston vises locate and hold the pistons by two wrist pins. And they're repeatable, which means that once you set up the vises, you're ready to drop in the other pistons and go—even upside-down—for balancing or lightening operations. Let COMP Cams compound angle piston vises help you with your automotive rebuilds.
Not Yet Reviewed
$1,305.95
Engine Works Oil Pump Primers
The right tool for that special job--Engine Works oil pump primers include bushing for proper pressurization of the oiling system. They work with a 3/8 in. chuck drill to properly lubricate your engine's oil pump and passages before start-up.
Not Yet Reviewed
$26.21
Summit Racing™ Crankshaft Sockets
If you're building an engine or doing a cam swap, you'll want one of our Summit Racing™ crankshaft sockets in your toolbox. They're available for a variety of engine applications. Not only do these accept 1/2 in. drive ratchets or breaker bars for turning your engine over, but we've built in the provision to mount a cam degree wheel. Each crank socket features a durable black oxide finish and is precision machined from carbon steel for a tight fit over the crank snout. We've knurled the degree wheel retaining nut for a tool-free grip and quick adjustment when turning the degree wheel on the socket for finding top dead center.
( 7 )
$67.99
LSM Racing Valve Spring Removal Tools
LSM Racing has developed the standard for changing valve springs with their innovative design. These LSM Racing valve spring removal tools are simply the best quality and easiest to use tools available. They make changing valve springs a fast and simple one-person job.
( 111 )
$249.99
—
$473.51
COMP Cams Crankshaft Sockets
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 199 )
$59.95
Summit Racing™ Crank-Turning Sockets
Our Summit Racing™ crank-turning sockets will make turning your crank a snap. Made from non-marring aluminum, these sockets allow you to turn your engine over by hand to check clearance, degree your cam, or whatever else you may need to do. They accept a 1/2 in. drive ratchet or breaker bar.
( 80 )
$22.99
Summit Racing Equipment® EZ Pushrod Length Checkers
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 11 )
$149.99
P-Ayr Products Replica Short Block Engines
P-Ayr replica short blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting.
( 9 )
$597.99
—
$666.99
Proform Crankshaft-Turning Sockets
Make it easy to turn your engine's rotating assembly with one of Proform's crankshaft-turning sockets. They're made of non-marring aluminum and accept a 1/2 in. drive breaker bar or drive ratchet. The sockets enable you to rotate the crankshaft in the proper direction when the balancer is off, making your engine assembly much quicker and easier.
( 64 )
$22.99
—
$33.99
Proform Oil Pump Pickup Driver Tools
Proform offers specialty driver tools designed to easily install the oil pump pickup tube into Chevrolet big block engines. They're manufactured from durable steel and have a black oxide coated finish. No need to struggle and possibly damage your oil pump pickup tubes. Get the right tool for the job and easy installation! The tools are available for either big block or small block applications.
( 52 )
$20.99
Moroso Exhaust Block-Off Storage Plates
Moroso exhaust block-off storage plates are a convenient way to keep engines sealed up from foreign objects during storage or when painting an engine. They are constructed from durable aluminum, making them lightweight and corrosion-resistant.
( 2 )
$29.99
MotoRad Cooling System Pressure Tester Adapters
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$44.99
—
$93.99
Dorman Rear Crankshaft Oil Seal Installers
Dorman rear crankshaft oil seal installers are convenient and valuable tools for use for when replacing the rear main seal cover on specified vehicle applications. These must-have tools ensure the cover is properly aligned on the crankshaft to prevent damage and leaks. The tools machined from low-carbon steel, zinc-plated and then are clear-chromate-coated for durability.
( 1 )
$72.99
Moroso Degree Wheel Crankshaft Sockets
Moroso degree wheel crankshaft sockets easily turn over your engine and degree-in the camshaft. These sockets have a 1/2 in. drive and make it easier to locate TDC and BDC. They feature a knurled jam nut that is used to position a degree wheel, and can be loosened and turned separately from the socket. A broached keyway allows the socket to slide over the crankshaft snout for positive engagement.
( 8 )
$101.94
Jaz Products Engine Block-Off Kits
Made of strong and durable plastic, these Jaz Products engine block-off kits protect your engine by blocking off open ports during storage or as a work in progress. These kits keep dirt and debris from entering various inlets and outlets on your engine.
( 18 )
$23.79
—
$23.99
Manley Pushrod Length Checkers
Manley pushrod length checkers help you ensure that you have the length you need, which will keep the rocker arms centered on the valve tip and reduce stem and guide wear.
( 11 )
$20.41
COMP Cams Shaft Mount Valve Spring Compressors
You know what a chore it can be to remove high-pressure valve springs with shaft mounted rocker arms. Remove and install valve springs the safe and correct way with COMP Cams shaft mount valve spring compressors. They are designed to facilitate valve spring removal on heads with shaft mounted rockers while the cylinder heads are still on the engine.
( 24 )
$159.95
Proform Pushrod Length Checkers
Proform pushrod length checkers help to prevent problems that may occur with incorrect-length pushrods installed. They're available in different styles for use on a variety of vehicles from the 1950s and up. Order the model best suited for your application.
( 69 )
$18.99
Milodon Crankshaft Sockets
Make it easy to turn your engine's rotating assembly with one of Milodon's crankshaft sockets. They're made of high-quality steel, accept a 1/2 in. drive breaker bar or drive ratchet, and feature a gold iridited finish for durability. These sockets enable you to rotate the crankshaft in the proper direction when the balancer is off, making your engine assembly much quicker and easier.
( 34 )
$32.95
