Availability
Showing In Stock Items. Show All 19 Items.
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 197 )
$83.99
Summit Racing™ Pro LS main cap pullers are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. The tool's design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, a Summit Racing™ Pro LS main cap puller is a must-have.
( 8 )
$205.99
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 10 )
$99.99
—
$229.99
Make between-rounds valve spring changes quickly and easily with these Summit Racing™ valve spring compressors. With multiple styles to choose from we're sure to have a spring compressor to suit your needs.
( 309 )
$99.99
Lisle injector seal installer kits are used for replacing PTFE seals on most Hitachi, Bosch, Continental, and Delphi single and double sealed fuel injectors found on many Ford, GM, and Subaru engines. These kits also work on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the cylinder head. Lisle injector seal installer kits include eight pieces—five different seal stretchers, two resizers (one for Ford), and a seal pusher. Everything is contained within a sturdy case. Add a kit to your tool arsenal. Kit contents: * Seal pusher * Injector seal resizer for Ford .312 * Injector seal resizer .310 * Seal stretcher .160 * Seal stretcher .250 * Seal stretcher .330 * Seal stretcher .408 * Seal stretcher .430
( 2 )
$47.99
COMP Cams' 7.3L Godzilla cam phaser socket tool (5475) is required to remove the camshaft phaser bolt on Godzilla engines. For those DIYers looking to upgrade the camshafts on the 7.3L Godzilla, this socket has proven difficult to find. The sturdy 16-point, 22mm socket is made to fit a 1/2 in. drive ratchet.
( 1 )
$32.95
Our Summit Racing™ camshaft installation handles for GM LS and Chevy V8 and 90 degree V6 engines feature a hex design that provides a solid grip for camshaft installation and removal. Choose from the economy handle for the early Chevy V8 or the deluxe handle that works on Gen III/IV LS engines and also Chevy V8's.Installation bolts are not included on deluxe model.
( 42 )
$42.99
Holley crankshaft seal installation tools keep the seal straight and square during installation, eliminating seal damage. Featuring diecast aluminum construction, the seal installation tool is to be used along with a standard harmonic balancer installation tool to properly install the crankshaft seal in the timing cover. These special tools from Holley are available for your Gen III Hemi or 7.3L Godzilla engine. Choose the one for your engine. Holley installation tools are available to: * Work with Holley Gen III Hemi mid-mount accessory drive systems and stock factory timing covers * Work with 7.3L Godzilla engine and Holley and stock factory timing cover
( 1 )
$25.33
—
$25.61
ATI Performance Products crankshaft pin drill fixture kits are designed to pin the crankshaft for high-rpm, supercharged, turbocharged, or high-horsepower nitrous oxide engines. They include a billet aluminum black-anodized drill fixture, a hardened 11/64 in. drill bit, an alignment tool, and pins for the crankshaft.
( 28 )
$131.02
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 85 )
$160.95
Lisle serpentine belt stretch tools are designed for removal and installation of most stretch belt applications found on many accessory drive systems. They feature unique magnetic faces which hold the belts in place on the pulley. These tools help prevent damage to both the belt and the pulley during removal or installation, and they can be used on the front or back side of the pulley. Select the one designed for your application.
( 5 )
$19.99
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 195 )
$115.95
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$40.79
Summit Racing™ cam phaser tools pressurize the phaser with air, allowing it to float for piston-to-valve clearance checks through the phaser's range. Available in several styles, select the appropriate to your application.
Not Yet Reviewed
$99.99
Moroso exhaust block-off storage plates are a convenient way to keep engines sealed up from foreign objects during storage or when painting an engine. They are constructed from durable aluminum, making them lightweight and corrosion-resistant.
( 2 )
$22.99
—
$25.99
CTA offers a wide range of professional automotive specialty tools including Ford camshaft alignment tools that are a must when servicing the camshaft. Accurate camshaft alignment is crucial for proper engine timing, which directly affects engine performance, fuel efficiency, and overall engine health. Incorrect timing can lead to misfires, stalling, and even engine damage. These Ford camshaft alignment holding tools from CTA are engineered to hold the camshafts in the correct position, while the variable cam timing units, timing chains, or camshafts are removed or installed.
Not Yet Reviewed
$115.45
BikeMaster magneto flywheel pullers are made of high-quality steel construction that has an anodized black finish for long-lasting durability and performance. BikeMaster has the high-quality pullers you could need to finish any type of flywheel project while working on your bike.
( 4 )
$22.26
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
