Availability
Showing In Stock Items. Show All 33 Items.
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$241.99
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 7 )
$134.99
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$45.99
—
$113.99
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 10 )
$149.99
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$15.99
—
$22.99
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$598.99
—
$769.99
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 85 )
$160.95
ATI Performance Products crankshaft pin drill fixture kits are designed to pin the crankshaft for high-rpm, supercharged, turbocharged, or high-horsepower nitrous oxide engines. They include a billet aluminum black-anodized drill fixture, a hardened 11/64 in. drill bit, an alignment tool, and pins for the crankshaft.
( 28 )
$131.02
Lisle fuel injector remover and installer kits come with three application specific attachments. Remove the shoulder bolt to switch between the attachments. The injector puller can handle a variety of injectors that are commonly found in Cummins and Duramax engines. The two-jaw design firmly grips the injector while it is being removed by the slide hammer. These kits save time and reduces the likelihood of damaging the injector or head.
Not Yet Reviewed
$151.99
South Bend Clutch alignment tools are designed to align the flywheel and clutch disc for trouble-free insertion of the input shaft. The clutch alignment tools are designed to help make the installation of your new clutch much faster and easier and are available for a wide variety of makes, models, and transmissions. Select the tool designed for your specific application needs.
( 1 )
$5.81
BOLT padlocks are the only padlocks that will open with your ignition key. Now, that's really a breakthrough: one-key technology! They feature a hardened zinc-nickel plated shackle, a solid zinc core, and an automotive-grade cylinder with a patented 6-plate tumbler sidebar to prevent picking and bumping. These padlocks have a rugged, weather-resistant jacket to protect your gear and achieve the ASTM's top corrosion resistance rating. Order the model recommended for your vehicle make.
( 20 )
$29.69
Holley crankshaft seal installation tools keep the seal straight and square during installation, eliminating seal damage. Featuring diecast aluminum construction, the seal installation tool is to be used along with a standard harmonic balancer installation tool to properly install the crankshaft seal in the timing cover. These special tools from Holley are available for your Gen III Hemi or 7.3L Godzilla engine. Choose the one for your engine. Holley installation tools are available to: * Work with Holley Gen III Hemi mid-mount accessory drive systems and stock factory timing covers * Work with 7.3L Godzilla engine and Holley and stock factory timing cover
( 1 )
$24.99
OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.
( 2 )
$806.99
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 195 )
$115.95
Proform Oil Pump Primer Sockets make a time-consuming job quick and easy. Made of hard anodized aluminum, the socket tools slip over the crankshaft and snug into the splines of the oil pump. To use, the oil pump drive gear must be removed from the crankshaft. When assembling an engine, these sockets can be used with the timing cover on or off. Order the model recommended for your vehicle year/make and engine application. (NOTE: This is for aftermarket setups only, because the OEM oil pump drive gear will not come off separately. Use a 3/8 in. adapter and a power drill to prime away happily.)
( 1 )
$69.99
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
If your spare tire tool kit is missing, replace it ASAP with one of Dorman's spare tire tool kits. The last thing you want is to be stuck on the side of the road unable to service your vehicle's tire. These kits are a cost-efficient and time-saving alternative to purchasing each tool separately. They come with the necessary equipment to remove/install wheels, lug nuts, and a jack tool to raise/lower the spare tire (where applicable). Components are constructed of steel and powdercoated for lasting durability. A carry case is included to safely organize the kit within your vehicle's factory storage compartment. Order the kit designed for your vehicle application.
( 6 )
$48.99
Dorman multipurpose funnels are available for any number of automotive maintenance applications. They're constructed of quality materials for longevity and are available in a range of sizes. Direct your fluids precisely into their reservoirs without spilling onto other engine parts—economical Dorman funnels make it possible!
( 9 )
$6.99
BOLT offers replacement lock cylinders for their toolbox latch retro-fit kits. They will match your factory ignition key when you select a cylinder model recommended for your vehicle/make. The lock cylinders feature an automotive-grade tumbler with a corrosion-resistant zinc core, plus a rugged, weather-resistant exterior. They're made with a stainless steel lock shutter to keep dirt out.
( 7 )
$16.99
BOLT cable locks feature a solid zinc core and an automotive-grade cylinder with a patented 6-plate tumbler sidebar to deter theft. That means the only way to open BOLT cable locks is with your ignition key. Now, that's breakthrough one-key technology! These cable locks feature a stainless steel lock shutter design to keep out moisture and dirt, and a rugged Santoprene jacket, which helps to protect your gear. BOLT steel cables are 6 ft. long, GAC-coated in black vinyl to 5/16 in. O.D., and coil-sprung for compact storage. Versatile cable locks have countless uses to protect your valuables—from powersports vehicles, tires, toolboxes, and more. Order the model recommended for your vehicle/make to ensure one-key compatibility.
( 1 )
$44.99
Moroso exhaust block-off storage plates are a convenient way to keep engines sealed up from foreign objects during storage or when painting an engine. They are constructed from durable aluminum, making them lightweight and corrosion-resistant.
( 2 )
$22.99
SPC Performance flat hex wrenches are designed to make the installation of Dodge pin joints quicker and easier. They allow you to hold your adjustment with a socket and then tighten the jam nut with their small crafted design. If you're working on a Dodge and need to change your pin joints, SPC Performance flat hex wrenches are must-haves.
Not Yet Reviewed
$39.99
On some vehicles, installation of the grille guard may interfere with the function of parking sensors. Westin Sportsman X sensor relocation kits are the solution. They allow you to easily reposition the parking sensors on the grille guard and continue proper parking sensor operation--without having to cut or modify your Sportsman X grille guard. These vehicle-specific kits include two relocation housings for mounting and the wiring components.
Not Yet Reviewed
$120.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
