Availability
Showing In Stock Items. Show All 37 Items.
King Shocks T-handle coil nut adjuster wrenches make quick work of coil nut adjustments. These textured T-handle tools fit 2.0 and 2.5 in. shocks. If you plan on doing the servicing and tuning on your King shocks, you'll need the right tool; you'll need their T-handle coil nut adjuster wrench.
( 7 )
$35.15
B-G Racing string line reels make the stringing process simple and also offer a neat storage solution to keep the string clean and tidy when not in use. These plastic reels are the easiest and most accurate way to achieve 4-wheel alignment on almost any car. They're fully adjustable to allow fitment to a wide range of vehicles. B-G string line reels attach to the vehicle using the rubber coated hooking arms—which are interchangeable to all of the tubes in the String Line kits (sold separately).
Not Yet Reviewed
$36.00
Allstar shock travel indicator kits check the compression and rebound of coilover shocks with just a glance. Clamp the aluminum bracket to the body of the shock and bolt the opposite end to the existing shock eyebolt. These kits can work with both standard and coilover shocks. Choose the Allstar model that best suits your size and type of spring.
Not Yet Reviewed
$43.99
—
$47.99
JOES Racing Products transponder mounting pouches are made from canvas and allow remote mounting of the transponder. Each pouch has steel reinforced eyelets to ensure the transponder stays in place, even during racing contact.
Not Yet Reviewed
$23.95
It is important to know what shims to run when rebuilding your front knuckles--Trail-Gear's knuckle pull scales are the authentic way to get the job done right! The knuckle pull scales are helpful service tools in properly setting up the shims on a knuckle. The shims control the alignment of the knuckle with your 4x4's axle housing. If not shimmed properly, your inner axle seals, spindle bushings, and locking hubs will be out of alignment, and that in turn can lead to excessive wear, and they may even bind. Don't let this happen to your investment! Take out all of the guesswork and save time and money with these genuine Trail-Gear service tools.
Not Yet Reviewed
$29.99
If you're missing a specific size adapter or receiving tube, OTC offers these replacements. They are available for the different service kits, and are made from hardened steel to stand up to daily use without failure. Replace your damaged or missing pieces with OTC ball joint service tool replacement components.
( 2 )
$22.99
—
$53.99
Longacre caster camber gauge adapters will help you to set up the front-end of your race car. They allow you to mount the Longacre caster camber gauge. Make sure that your front-end is set up correctly before you hit the track with one of these Longacre caster camber gauge magnetic adapters.
( 10 )
$51.99
—
$54.99
Milwaukee wide blade tape measures have the longest reach and straightest standout in the industry! These tape measures are wear- and impact-resistant, with nylon-bond blade protection—and an additional anti-tear coating on the first 6 ft. of the blade, reducing tape tear. Built to withstand the jobsite, these measuring tapes are constructed with a 5-point reinforced frame for impact resistance. They're available in a variety of lengths.
( 1 )
$25.99
These SPC Performance camber/caster wrenches have been designed to make front-end alignments easier and faster. They feature an offset-L design to permit easy access to the mounting bolts. These SPC Performance camber/caster wrenches are available in your choice of SAE or metric sizes.
( 1 )
$32.99
—
$47.99
These SPC Performance tie rod adjusting tools are designed to adjust vehicles with split tie rod sleeves. They are available in different configurations to fit most standard size passenger cars and light trucks. Save yourself time and money with one of these SPC Performance tie rod adjusting tools.
( 3 )
$24.99
—
$36.99
Motion Pro HD rear wheel alignment tools are for use on Harley-Davidson® Softail, Sportster, and Dyna models. Features include: * Designed to help set rear wheel alignment * Fast, accurate, and easy to use * Eliminates the need to use a tape measure * Proper wheel alignment extends chain, sprocket, and belt life
( 2 )
$21.99
Renew your Fox Racing Shox with their wide selection of rebuild kits. Servicing your shocks with genuine Fox components will provide you with the confidence of knowing that the fit and function will be just as expected. Whether you're doing a partial or full rebuild on one of your Float models, or your Podiums, Zeros, or OE-style shocks, they offer kits with all of the necessary items to get the job done. They even have kits with FIST seals to help you battle the ice and snow. Maintain your machine's suspension performance levels with the only parts made specifically for your shocks--Fox Racing Shox rebuild kits.
( 1 )
$36.49
—
$40.49
Even though your cycle's suspension can seem complex, the maintenance shouldn't be. Progressive Suspension has developed tools to make the process easier, like their zinc coated steel preload wrenches. They come available in adjustable and non-adjustable styles to fit most adjusters found on single factory or aftermarket shocks, or in a compact size for use with 3/8 in. drive ratchets. Don't make the job harder than it is--ride more with the help of Progressive suspension tools.
( 9 )
$31.95
S&G Tool Aid air strut alignment levels are designed to restore your vehicle's camber setting after strut repair or the installation of CV joints, ball joints, or tie rod ends. Simply attach these tools' super-strong magnetic base to the brake rotor, spindle, or steering knuckle before the job and calibrate their bubble level to record proper camber. Later, when the drop is done, reattach the tools and adjust the struts to level them out again.
( 6 )
$41.99
If you've lost or bent one or more of the swivel feet on your scale pad levelers, no problem--replacement swivel feet from Longacre will make your leveling trays like new. These 1/2 in.-13 replacement screw-in feet are available in either 4 in. or 8 in. lengths. Longacre has the replacement pieces that you need to keep you racing.
Not Yet Reviewed
$46.99
These SPC Performance adjustable sleeve wrenches are designed for presetting truck sleeves, making it easier to properly set the alignment. They are available in your choice of 1 1/2 in. or 1 1/4 in. sizes. Made of heavy-duty steel, the SPC Performance adjustable sleeve wrenches will not bend or flex under pressure.
Not Yet Reviewed
$30.99
—
$33.99
Klein Tools tape measures offer inventive first-rate features derived from jobsite professionals—to make jobs easier and more efficient. A sealed tape brake panel is large enough to allow 2-3 fingers to operate at once for safe retraction, and will keep water and dirt out to prevent tape blade rust and degradation. The high-impact rugged, rubberized industrial design offers a good grip and stands up to basic demands of the job site. These vital tools are available in a variety of lengths and styles. Choose the model that best fits your needs.
Not Yet Reviewed
$24.98
—
$34.99
JOES Racing caster camber gauge adapters mate with your precision gauge for accurate alignment and chassis setup. They are precision-machined for true results and attach to your front wheels and to the gauge, allowing you to process both the caster and camber tilt readings. JOES Racing caster camber gauge adapters are available in magnetic and threaded styles for various applications--kart, standard, metric, Wide 5, and more. Whether for your daily driver or your race car, correct alignment is important and necessary. Let JOES Racing caster camber adapters assist you for the best performance.
( 1 )
$40.95
These SPC Performance toe tools make adjustments quickly and accurately. They are available in a variety of styles and configurations to fit your specific vehicle. Easily used with normal hand tools, these SPC Performance toe tools are sure to get your vehicle aligned in no time.
Not Yet Reviewed
$53.99
—
$67.99
Motion Pro nitrogen needle kits will fill shocks with self-sealing rubber valves. The kits can be used in conjunction with Motion Pro's nitrogen shock gauge. Instructions are included.
Not Yet Reviewed
$20.99
Get your alignment set correctly with these SPC Performance alignment sockets. They are specially designed to fit over the stock bolt head and allow for the adjustment of camber angles. Keep your tire wear even--get one of these SPC Performance alignment sockets and keep your wheels in line.
Not Yet Reviewed
$23.99
—
$42.99
Empire brass plumb bobs are available in a variety of weights. They're machined from solid brass with a lacquered finish to resist corrosion. Each bob ties easily to any string or line. An extra hardened steel tip is included with each bob (except the 32 oz. model). These accessories are used to achieve precise accuracy in all layout work, construction and surveying. The bobs determine the vertical (or plumb) line from the point of suspension to a point on the ground.
Not Yet Reviewed
$29.97
If you're having trouble with threads on your ball joint press, then you may need one of these SPC Performance replacement ball joint press C frame forcing screws. They feature a hex end for your socket attachment and a special end that fits into the ball joint that you're installing or removing.
Not Yet Reviewed
$52.99
Motion Pro damper rod fork tools aid in the assembly and disassembly of most inverted forks. They feature hardened steel construction and a durable black finish. Motion Pro damper rod fork tools offer a perfect fit and are an absolute must for complete fork disassemblies.
Not Yet Reviewed
$48.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
