Availability
Showing In Stock Items. Show All 40 Items.
They may look like sci-fi laser guns, but Zendex Tool Speed Blasters are all business. Just connect one 1/4 in. NPT airline and fill the gravity-feed reservoir, and you're ready to sandblast. A fully adjustable material control valve meters sand flow precisely. Gravity forces the particles into a hardened steel mixing chamber and then through a ceramic nozzle. The Speed Blasters operate at 60-125 psi and use silica media only.
( 7 )
$56.99
Lincoln Electric Century FC90 flux-cored wire feed welders are perfect for hobbyists, maintenance, and mobile welders. These compact welders provide strong, consistent welds on 18-gauge to 1/4 in. thick steel in a single pass. The FC90 includes a shoulder strap for easy portability, as well as a 6 ft. cable with ground clamp, a 6 ft. gun and cable assembly, and 6 ft. input cable with 120 V/15-amp plug.
( 7 )
$248.99
Milwaukee SWITCHBLADE self-feed bit plumber's kits offers a convenient assortment of the Milwaukee SWITCHBLADE self-feed bits commonly used on the jobsite. These self-feed bits drill up to 12 percent faster and deliver up to two times longer life. Designed for any trade that demands repetitive cutting of large holes in wood, SWITCHBLADE bits allow you to remove and replace blades, rather than resharpen. You get a new bit with every quick, convenient change of the hardened steel blade, and less downtime on the job. An aggressive feed-screw design enables the bit to pull-through quickly for faster drilling. Milwaukee Tools' SWITCHBLADE self-feed bits are built to last and designed to perform. Additional kit features and contents: * Bits and blades are engraved for quick and easy size identification * Common bit diameter sizes in kit: 1 3/8, 1 1/2, 2 1/8, and 2 9/16 in. * Includes replacement blades, feed screws, and set screws * Includes a 5 1/2 in. Quik-Lok extension and a hex key * An impact-resistant carrying case is included to house all tools
( 1 )
$192.99
Performance Tool abrasive spot blaster guns are ideal for quickly removing rust spots and chipped paint from metal surfaces. Features include: * Top-mounted gravity feed ABS hopper holds up to 510 ml (17.2 fl. oz.) of blast media * 5mm zinc plated nozzle and reinforced plastic gun body offers light weight and durability * Includes two 1Kg bottles of silicone carbide (carborundum) blast media * Nozzle size: 5mm * Average air consumption: 6 cfm at 90 psi * Air inlet: 1/4 in. NPT * Hose size: 1/4 in. I.D.
( 3 )
$21.99
Performance Tool portable blasters are designed to remove rust, paint, graffiti, corrosion, and scale. They feature a heavy-duty 50 lb. capacity hopper, an aluminum blast gun, and include the material hose. The blasters are compatible with any abrasive, including silica, sand, glass beads, and pecan shells. These Performance Tool portable blasters will make quick work of any task you'll encounter.
( 4 )
$73.99
John Dow portable fuel stations are mobile tanks UN/DOT-approved for the transport of gasoline by motor vehicle—and to gravity-dispense fuel into gas-powered portable equipment, vehicle fuel tanks, or other approved containers. Built with safety as the number one priority, these steel portable fuel stations have been vigorously tested for leakage, rupture, stability, abuse, and endurance. Specifically designed to be bolted into a trailer for those needing to transport fuel, they are also perfect for farming, landscaping, golf course maintenance, recreational, and outdoor use with small engines, as well as reducing your trips to the gas station! Features and specs include: * Durable, welded steel tank * Gravity-feed style tank * 10 ft. dispensing hose * Built-in shut-off valve * Ground wire for safety * Squeeze handle dispenser * Nominal capacity: 15 gallons * Gross weight filled: 116 lbs. * Dimensions: 39 in. L x 14.5 in. H x 12 in. W
( 5 )
$256.99
Lincoln Electric Magnum® 100SG spool guns deliver reliable, precise wire feeding performance for less. Whether you're an experienced or novice welder, Magnum® 100SG spool guns will exceed your expectations for performance and ease of setup. They will convert your Lincoln Electric compact wire feeders/welders from steel machines to aluminum! These lightweight guns--only 3.5 lbs.--offer an ergonomic grip and a balanced design with a full travel trigger that can be easily felt through your welding gloves. Each set includes a 10 ft. gun cable, a control harness, and a gun connector for fast connections to your welding machine, plus a spool of aluminum alloy wire, contact tips, and a cushioned carrying case to keep everything together. All aluminum alloys and recommended wire diameters can be fed with the same drive roll and liner assembly. Make your Lincoln MIG wire feeder welders more useful and versatile for light fabrication, repairs, and quick projects--add Magnum® 100SG spool guns to your arsenal.
( 19 )
$299.99
Strong enough for oil, grease, and solvents, and yet versatile enough to be everyday spill picker-uppers, ShopMax towels perform like no other paper towels. With their thick, cloth-like construction and low linting properties, these multipurpose disposable towels are excellent replacements for cloth rags. From doing detail work in professional shops and garages ... to cleaning tools in DIY workshops and garages, the durable, high performance SCA Tork ShopMax towels are a perfect choice for countless uses. Summit Racing™ Bulk SCA Tork ShopMax Advanced 450 center feed towels offer an excellent value for the shop or home.
Not Yet Reviewed
$133.16
Lincoln Electric spindle adapters can handle up to 12 1/2 lb. spools of wire and are compatible with Lincoln Electric wire feed welders. Made of PVC and plastic for lightweight durability, their solid construction provides strength and resilience for long-lasting performance. Lincoln Electric spindle adapters are designed for 8 in. spools.
( 9 )
$9.99
Mittler Brothers power drive bead rollers help strengthen sheet metal panels while adding a great look to your project. MB rollers add a hem to the edges of the metal eliminating sharp edges that can potentially cut your hands plus, the bead rollers are power-driven. So, unlike the old-fashioned crank models that required one guy to feed the metal and another to turn the crank, you can operate them yourself. Mittler Brothers power drive bead rollers are available in a choice of throat depths, materials, and variable and constant speed models, so there's sure to be a perfect model for your shop. Mittler Brothers power drive bead rollers offer: * Either billet aluminum or jig-welded steel frames * 100+ bead roll profiles * 1 1/8 in. throat height * Adjustable depth of bead * Oilite bushings for long service life * Variable speed foot pedal operation * Forward/reverse switch * Both shafts driven
Not Yet Reviewed
$1,725.00
If you are looking to take the next step from a mill-drill or step pulley mill, these Baileigh Industrial VM-949E-VS vertical milling machines are just what you are after. This knee mill has a familiar old-school feel, while having many creature comforts that are not typically found in this market range. Outfitted with a 3 hp continuous duty motor requiring only 220 V single phase power, the Baileigh Industrial VM-949E-VS vertical mill machines are perfect for hobbyists, small shops, and professionals alike. Baileigh Industrial VM-949E-VS vertical milling machines feature: * Variable spindle speed by adjustable sheaves/pulleys control spindle rpm with the turn of a handle * Infinitely adjustable variable speed from 60 to 4,200 rpm allows tooling to run at its intended speed, resulted in longer tool life and better finishes * R8 spindle and drawbar accepts the most common tooling * Meehanite casting is rigid and dependable for decades of use * Spindle brake offers easier tool changes and quick spindle stops * 3-speed power quill feed with manual wheel is perfect for boring and accurate, consistent work * DRO for X and Y axes * Power feed X axis with rapid consistent travel speed without tiresome cranking * Dovetail ways with adjustable gibs keep tolerances tight year after year * Taiwan lead screws with backlash adjustable nuts remove backlash instead of compensating for it * Way covers and wipers keep chips off ways and bed * Integrated coolant system w/ splash guard (large 6-gallon reservoir in the base houses the pump; plumbed return line from the table eliminates overflow and messes) * LED work light * One-shot lubricator keeps up on lubrication maintenance by simply pulling a lever
Not Yet Reviewed
$16,502.99
Made of rigid steel, the Baileigh Industrial BR-16E power bead rollers combine all the best features in one package—including a quick-release top die, adjustable shaft, variable-speed pedal, depth stops, and more! Features of BR-16E-36 power bead rollers: * 16-gauge mild steel maximum capacity * 36 in. throat depth enables you to work on the middle of large panels * Industrial .5 hp motor runs on 110 V power and plugs into any household outlet * Both rolls are driven (chain drive on the top roll prevents slippage) * Variable-speed foot pedal lets you slow down your feed rate for more delicate work * You can change the rpm of the rolls in real time by turning the dial on the side or lock the rolls at a constant speed * Rollers can run forward or in reverse, so you can go over a pattern as needed * Left- and right-hand controls are the same on both sides of the machine * Adjust the forming depth by turning a hand wheel just above the working area * Quick-release top die can open and close without altering the depth pressure * You can begin or end a design in the middle of the panel and not worry if the depth is set correctly * Depth stop allows you to easily make straight, repeatable beads * Comes standard with a 1/4 in. round bead tooling set and a .05 in. step roll set * Shaft is compatible with standard tooling to allow user to reuse rolls from another brand * Bottom die can slide in or out, so you can create custom profiles by varying the offset * All friction points turn on bronze bushings that last for decades and grease fittings allow for convenient maintenance * Heavy steel frame ensures accurate beads over many years of use and helps prevent flex * Covered by Baileigh Industrial's 1-year parts warranty and includes lifetime technical support by phone from a team of expert metalworkers
Not Yet Reviewed
$7,018.99
The Baileigh Industrial BW-200MP is a dual-voltage inverter-powered multi-process welder. It features an LCD control screen that quickly and easily walks the user through setup. This 200A welder will excel in almost any environment—and it comes with the features that you demand. Product details: * The BW 200 IGBT inverter technology requires 25 percent less input power and delivers consistent power output * Dual voltage can run on 120 V or 230 V single-phase power * LCD control screen provides quick and easy setup with "save for future setup" mode * Performs MIG and flux core welding 40–140 amps (120 V) and 40–200 amps (230 V); TIG-welding up to 180 amps; stick welding up to 180 amps * Built-in, adjustable spot timer adds versatility * Synergic wire diameter and material thickness settings makes for easy work * Infinite wire feed speed control allows user to adjust the voltage and current accurately * ARC force (MMA) * Hot start (MMA) * 2T/4T (trigger lock off/ trigger lock on) * Generator-safe * Easily sourced consumables * 200A inverter welder includes: 10 ft. spool gun, electrode holder, TIG torch, foot pedal, MIG torch, ground clamp, gas regulator with hoses, 6-50P 250 V plug, and adapter to 120 V plug
Not Yet Reviewed
$1,315.99
Safety should always be one of the main concerns when woodworking and a power feeder is one of the easiest ways to ensure that you keep your hands away from cutting edges. Baileigh Industrial PF-3750 power feeders are designed to keep your workpiece as stable as possible using a roller spring suspension that generates friction and pressure on the workpiece. Also, workpieces with minor variations in thickness of up to 15/16 in. are easily compensated via the roller spring mechanism. Baileigh PF-3750 cabinet feeders may be mounted for use with various fences and wood machinery, such as shapers. When mounted with the included universal mount, these powerful feeders use a continuous duty 1/2 hp motor to provide the feed, ensuring that your feed rate is consistent and reliable. The PF-3750 stock feeders have eight speed settings that can easily be changed depending on your requirements with the included gear sets.
Not Yet Reviewed
$1,419.99
H&S Autoshot HSM 250 Double-Pulse Synergic MIG welders are multi-purpose MIG, TIG, and stick welding units. These compact machines offer three MIG wire feed and torch drives with 28 synergic, synergic single-pulse, or synergic double-pulse programs for steel, aluminum, and silicone bronze welding. They accommodate wire sizes from 0.023-0.045 in.—and are lift-arc DC TIG and electrode welding capable. With 250 amps of power, they're capable of welding all steel and aluminum alloys from 20-gauge to 1/2 in., and they offer twin cylinder racks and dual gas inputs for mixed and 100 percent gases. Operating features include: a digital control panel, infinitely variable output power from 10-250 amps, operator selectable pre and post gas, slow feed, burn back, spot, ramp, slope, frequency, duty, arc length, spool gun, hot start, and arc force. Each kit includes: * Double-pulse synergic inverter power supply * Three dedicated MIG guns * Compact TIG torch with thumb-wheel control and 12 1/2 ft. quick-connect welding cable * 250 amp work clamp with a 10 ft. quick-connect welding cable * 250 amp electrode holder with a 10 ft. quick-connect welding cable * Dual gas regulators * AK-2 torch kit * Spool of steel, aluminum, and silicone bronze wire * V & U drive rolls * Operators manual
( 2 )
$5,141.99
OEM Tools flux core welders offer a convenient and economical way to weld up to 1/8 in. thick mild steel. This compact welder makes it easy to get started on basic welding jobs. It comes with everything you need and does not require gas. It works with flux core welding wire from .03 in. to .035 in. and has adjustable wire feed speed.
Not Yet Reviewed
$360.99
Baileigh BS-20SA-DM band saws are semi-automatic dual miter machines with a cast iron bow and steel frame to offer decades of reliable quality. Their hydraulic systems will speed up production and save you effort. Features include: * Maximum capacity of 13 in. O.D. round at 90 degrees * Accepts a 1.25 in. blade (included) for faster and more accurate cuts * Dual-mitering can move 45 degrees left and 60 degrees right * Inverter drive allows for infinite blade speed adjustments from 69 to 306 fpm * You can fine-tune the speed for materials like mild steel, bronze, or aluminum * Digital readout (DRO) allows you to reproduce settings with ease * Cast iron bow resists vibrations and helps to ensure a high-quality cut * Hydraulic vise, down feed, and bow return make production runs more efficient * Adjust the hydraulic descent pressure (depending on the material) to achieve faster cut times and longer blade life * Cutting head return position can be altered for faster cycle times between cuts on smaller pieces * Comes with heavy-duty infeed and outfeed tables for easier material handling * Patented blade tension device lets you easily set the right tension * Electro-welded steel frame provides structural strength to maintain accuracy * Compact floor plan conserves space in your shop * High-pressure flood coolant system washes away metal chips and helps blades last longer
Not Yet Reviewed
$26,399.00
Shops and job sites alike benefit of power and precision when the JET 7 in. x 12 in. Horizontal/Vertical band saw is put into action. These metal working band saws feature a UL-listed, 3-step gear and are powered by a 1 hp motor, producing unbeatable torque while consuming less energy with the ability to produce speeds from 88 to 270 SFPM. A multi-position blade guide increases throat capacity from 4 in. to 8 in. while in vertical position. With a long list of great features, these JET 7 in. x 12 in. Horizontal/Vertical band saws are a must-have for your work operation. Tools feature: * Heavy-duty 9 in. x 12 in. worktable * Four 8 in. rubber wheels for easy movement * Heavy casted iron bow and bed * Hydraulic down feed for ease of cut * Improved wider stand with built-in storage cabinet and chip tray * Sealed hardened and ground gear drive * Side-eccentric shaft and ball bearing
Not Yet Reviewed
$2,749.00
SCA Tork M-Box centerfeed towel dispensers offer high storage capacity and are ideal for high-traffic environments. Tork towel dispensers are a great hygienic solution to eliminating cross-contamination--you only touch the towel you use. Their one-hand dispensing is ideal for many environments like workshops, race trailers, or even kitchens. These Tork dispensers are durable and slim, and offer perfect wall-mounted convenience.
( 4 )
$21.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
