Availability
Showing In Stock Items. Show All 44 Items.
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 176 )
$12.99
—
$134.99
Ease engine swaps with Allstar Performance carbureted engine lift plates. They simply bolt to the intake manifold in place of the carburetor for a simple no-fuss operation. These Allstar Performance carbureted engine lift plates fit standard Holley 4150/4160 and 4500 Dominator, Rochester Quadrajet, Carter, Motorcraft, Edelbrock, Edelbrock Q-Jet and Carter AFB carburetors.
( 38 )
$14.99
Proform's new steel lift plates fit most Holley 2-barrels and 4-barrels as well as the Dominator.
( 13 )
$22.99
On Sale
Easily lift your engine with one of these Summit Racing™ engine slings. The nylon strap design prevents damage to valve covers, intakes, or any other engine accessory when lifting. The 24 in. straps allow the sling to clear most intake setups. Simply attach the four strap mounting tabs to the engine block and use a traditional engine hoist to safely support your engine during removal and installation.
( 39 )
$112.99
$101.69
—
$109.99
On Sale
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$3,707.88
—
$7,204.82
$3,522.49
—
$6,844.58
On Sale
Mr. Gasket battery operated fuel transfer pumps are sure to quickly become the most popular tool in your shop or garage. With adaptability to most fuel jugs and cans, plus the compatibility with several type fluids, you will love using it for cars, boats, dirt-bikes, ATVs, Side x Sides, lawn mowers, and tractors. Simple, safe, and easy-to-use, these handy Mr. Gasket battery operated fuel transfer pumps make all your fill-ups fun! Product highlights: * Includes adapters to allow fitment to most fuel and gas cans * Flexible intake hose allows operation in 5 gallon jugs and smaller * Compatible with gasoline, diesel, and kerosene * 3 gallons per minute flow rate * Operating temperatures of 25 degrees to 110 degrees * 4.25 ft. flexible discharge hose * Auto stop feature shuts pump off when tank is full * Uses four AA batteries (not included) Safety Note: This product is not intended for use for drinking water.
( 18 )
$99.95
$89.95
Proform offers engine lift plates for the GM LS-style engines that allow for straightforward work of GM LS Generation IV (2006-2016) engine swaps. Simply remove your intake manifold, followed by the valley tray cover, then mount a plate in their place with the existing valley tray bolts. The three hoist points allow optimal balance and tilting. These heavy-duty 3/16 in. steel workhorses can also provide valley cover during storage. Stop rattling your chains and use Proform engine lift plates for your GM LS engine instead.
( 24 )
$60.99
Moroso engine lift plates will allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as a manifold cover when you store your engine. These lift plates fit most 4-barrel intake manifolds.
( 4 )
$51.99
—
$67.99
Tera Pump electric transfer pumps feature a 15 to 20 in. telescopic intake tube to fit gas cans, racing/utility jugs, and small drums. They also include an XL extended 10 ft. discharge hose. These fluid transfer pumps are ideal for these liquids: gasoline, diesel, DEF, agricultural chemicals, kerosene, antifreeze, windshield washer fluid, and mild detergents. Powered by two "D" batteries (not included) the electric pumps also have a quick-stop manual safety nozzle.
Not Yet Reviewed
$85.99
Hoist away with Spectre Performance engine lift plates! Bolt these heavy-duty steel plates on in place of your carburetor to create a convenient lifting point for your engine. They feature a corrosion-resistant gold iridited finish and bolt onto 2-barrel or 4-barrel manifolds. Construct a stable lift and a safe seal over your intake for storage, all at the same time, with Spectre Performance engine lift plates.
( 8 )
$15.99
Where an ARB CKM series compressor is mounted on a vehicle, and may be submersed during water crossings, these air compressor filter relocation kits allow relocation of the air filter to above the waterline. These kits can also be used where the compressor is mounted in hot or dusty environments to relocate the air filter to a position that allows intake of cool, clean air. The A/C compressor filter relocation kits by ARB include nickel plated brass fittings, a 1.2m rubber hose, a filter mounting bracket, and all the necessary mounting screws to facilitate relocation of the filter. Note: This kit relocates one filter, therefore, you will need two kits for the ARB Dual Compressor.
Not Yet Reviewed
$45.95
On Sale
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial Silent Air piston compressors are quiet. One of the most common complaints about compressors is noise. EMAX Silent Air units not only quiet the noise, they also do it with big cfm output and lower rpm. Featuring their Whisper silent air system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and prefilter media within the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer; plus, it provides secondary filtration for cleaner air. Industrial Silent Air compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Silent Air compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. Their 15 Service Factor means the motors can be pulled 15 percent over full load. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 1 )
$2,647.88
—
$4,131.88
$2,515.49
—
$3,925.29
With the FE Series product line, ICEngineworks tried-and-true design and fabrication method is available for the development of precise full exhaust/cat-back systems, intercooler and turbo downpipe tubing assemblies, plus cold air intakes. ICEngineworks 2500 FE Series Pro kits include 208-pieces for a 2 1/2 in. O.D. design. Contents for 2500 FE Series Pro kits include: * (24) 5.00 in. long straight blocks * (36) 1.00 in. long straight blocks * (36) 3.00 in. CLR 15-degree blocks * (36) 3.50 in. CLR 15-degree blocks * (36) 4.00 in. CLR 15-degree blocks * (36) 5.00 in. CLR 15-degree blocks * Four block adapters * User manual * FE Series design control sheet pads * Plastic case
Not Yet Reviewed
$899.99
On Sale
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load
( 2 )
$3,283.88
—
$9,792.28
$3,119.69
—
$9,302.67
Empty your barrels with Keyser Manufacturing fluid transfer pumps. These sturdy hand pumps are designed to easily siphon fluid from large or too heavy containers to be tipped for pouring--in order to reduce the risk of spills. The intake hose or tube of a drum pump fits through the opening of a container to dip into the fluid within. The pumping mechanism then draws fluid through the intake and discharges it from the pump's outlet. The parts of the pump in contact with fluids being pumped should be compatible to avoid damaging the pump or contaminating pumped fluids.
Not Yet Reviewed
$24.99
OTC decarbonizing adapters, when used along with OTC fuel injector cleaning kits, will remove carbon from intake and combustion systems. They are included in the cleaning kits and are also available individually as a replacement or an extra.
Not Yet Reviewed
$38.99
Milwaukee M12 handheld sprayer components make your sprayer versatile and easy to use. The 1- or 2-gallon tanks can be use as replacements or extras to keep on hand to ensure you have the right size for the application. The tanks have translucent walls for visibility to liquid levels, feature imperial and metric measurement marks, and include an onboard measuring cup, strainer, and intake hose. The comfortable, adjustable shoulder straps are padded and transfer the sprayer's weight to your body, reducing fatigue during extended use.
Not Yet Reviewed
$21.97
On Sale
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$1,057.75
—
$1,059.95
$951.98
—
$953.96
On Sale
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$4,554.82
—
$7,416.82
$4,327.08
—
$7,045.98
Baileigh Industrial's BF-035 bead former is a vise-mounted manual bead roller that can make hose beads in thin-wall tubing for fuel, radiator, and intake lines. It's recommended for anyone working with thin-wall tubing (especially copper) for plumbing, radiators, condensers, AC units, and refrigerators. Product details: * Designed for 3/8 in. O.D. tubing with a maximum wall thickness of .035 in. * Comes with a round bead profile and works right out of the box * Removable handle lets you adapt a 1/4 in. square socket * Sheet metal beading tool mounts to your bench or vise with the included blocks * Replaceable friction points run on bronze bushings for long life * Hardened, precision-machined internal gears ensure high-quality beads for many years * Machined and anodized solid aluminum external housing keeps this small bead former working accurately
Not Yet Reviewed
$684.99
Tera Pump utility jug fuel transfer pumps deliver a flow rate of 2.4 gpm, with an auto-stop overfill system. They include water-resistant power buttons and battery cover in case of accidental spills. Now you can easily refuel boats, ATVs, motorcycles, cars, generators, lawn mowers, and more. Each pump includes a 4-pack of adapters, compatible with utility jugs, racing jugs, VP Racing, Mr. Gasket, Midwest Can, No-Spill Can, Scepter, Briggs & Stratton, and Garage Boss (does not include gas can and does not fit FMD gas cans). Pumps work with any non-corrosive liquids such as gasoline, diesel, non-potable water, kerosene, or light oils. NOT compatible with thinners, solvents, hot liquids, acetone, benzene, cresol, etc.
( 2 )
$87.99
Tera Pump offers electric telescopic drum pumps for a variety of drum sizes and fluid applications. They also have different telescoping suction tubes in different lengths. Compare the options and order the model best suited for your pump needs.
Not Yet Reviewed
$309.99
Mac's engine Pivot Plate adapters are designed for use with Mac's Pivot Plate articulated engine lift plate. Many engines won't work with the standard carburetor mount. These adapters allow you to use the Mac's Pivot Plate with specific applications.
( 11 )
$283.46
Transfer fluids with this compact and convenient hand-held Tera Pump battery-powered liquid transfer pumps. They transfer up to 2.4 gpm, and have a quick-stop manual safety nozzle, a 17 1/2 in. long suction tube, and a 40 in. long flexible discharging hose. Each pump requires two D batteries (not included).
Not Yet Reviewed
$64.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
