Shop Equipment Tools & Shop Equipment

Summit Racing™ Hydraulic Wheel Dollies

Summit Racing™ hydraulic wheel dollies feature a rugged steel chassis with a durable powdercoat finish and nylon casters made to easily roll over uneven surfaces. The units' sturdy composite rollers cradle vehicle tires up to 12 in. wide. These hands-free, pedal-operated systems enable you to effortlessly lift up to 1,500 lbs. (per dolly) while keeping your hands available for other tasks. If you're tired of wasting time moving vehicles with a jack and dolly, or you need to move a vehicle that is locked, blocked or stalled—these economical hydraulic wheel dollies by Summit Racing™ are the ideal solution.

4.2 out of 5 stars ( 44 )

$677.95

Summit Racing™ 1-Ton Adjustable Height Gantry Cranes

Pull an engine, lift a cab, move heavy shop equipment, load your truck—the possibilities are endless with this 2,200 lb. capacity Summit Racing™ gantry crane! The all-steel unit adjusts from 94 1/4 in. to 141 1/2 in. in height to adapt to different jobs, and spans 94 in. to accommodate the widest vehicles. It rolls smoothly on four rubber-coated 5 in. locking swivel casters, and disassembles quickly (without tools) for storage and transport. The I-beam measures 3 in. wide by 4 3/4 in. tall, and the crane base is 47 1/4 in. wide.

4.6 out of 5 stars ( 25 )

$729.99

Summit Racing™ Engine Run Stands

Building or refurbishing an engine is one of the most exciting endeavors a hobbyist can undertake. What's the next step after the engine build is complete? Take it for a test run on one of our Summit Racing™ engine run stands! These heavy-duty engine stands allow for a place to bolt a motor, then fire it up and run it for break-in, tuning, and to find and fix any problems, like leaks, before doing the final motor installation. The engine run stands are made from sturdy steel with a powdercoat finish for lasting service. They include threaded mounting posts to adjust engine mounts for proper height, and feature four sturdy, easy-roll casters with wheel lock to keep the unit from moving about. Take a test run you can trust with a Summit Racing™ engine run stand!

4.62 out of 5 stars ( 63 )

$739.99

Mittler Brothers Rear-End Narrowing Tool Kits

Mittler Brothers rear-end narrowing tool kits are designed to narrow your vehicle's rear-end for racing or street rod applications using precision-made tools. They include a 1 1/2 in. diameter turned, ground, and polished shaft that is passed through the trimmed rear-end housing (not included) and the inner bearing blocks. This ensures the accurate, square, and true, reinstallation of the housing ends. The kits feature a pinion centering plate and a variety of alignment blocks for specific housing ends, including Ford 9 in., Ford 8.8 in., 10-bolt GM, 12-bolt GM, Dana 44, Dana 60, and 8 3/4 in. Chrysler.

5.0 out of 5 stars ( 13 )

$662.99

AutoTwirler Mustang Body Carts

AutoTwirler Mustang body carts put your restoration project on a roll! These sturdy steel carts offer you the do-it-yourself mobility and underbody clearance that make your work easier, more comfortable, and more efficient. Fully welded for stability, AutoTwirler Mustang body carts mount on the front leaf spring brackets and the lower A-frame. Plus, their adjustable width in the front allows for use with small or big block engines. These body carts include heavy-duty, large-diameter casters to effortlessly lead your pony to any corner of your workshop. Get your projects rollin' with AutoTwirler Mustang body carts.

4.71 out of 5 stars ( 24 )

$539.99

Earl's Performance Electric Oil Circulation Pumps

Earl's Performance electric oil circulation pumps are ideal for circulating gear oil through an external oil cooler for cooling differentials or manual transmissions. These heavy-duty pumps feature a brass housing with a nickel plated finish and a 4-bolt mount with rubber vibration isolators. The compact design is durable enough to mount anywhere on the chassis or underhood. Earl's Performance electric oil circulation pumps feature: * Self-priming design with a flow rate of up to 2.1 gpm * Maximum oil weight of up to 90W * Lightweight 5.5 lbs. * 12 V with 10 amp draw * Maximum pressure of up to 72.5 psi * Compact dimensions: 6 1/2 in. tall x 4 5/8 in. wide x 3 3/4 in. deep

5.0 out of 5 stars ( 1 )

$579.95

BendPak Rolling Jack Replacement Power Units

BendPak rolling jack replacement power units deliver high-pressure hydraulic power to keep your lift performing at its highest level. These genuine BendPak power units are built to fit and function just like the originals they are replacing.

5.0 out of 5 stars ( 1 )

$599.99

—

$628.99

Evolution S15CPS Metal Cutting Chop Saws

Evolution S15CPS metal cutting chop saws empower you and professional fabricators to achieve the most efficient cutting results with extended blade life, unmatched cut quality, and absolute precision. Evolution's awesome EVOMAX cutting-edge enhancements, plus many other great features, makes these cold-cut saws the ideal choice for your best ever metal cutting experience. The S15CPS metal cutting chop saw is renowned for its rigidity and strength, works with 14 or 15 in. blades, and features a cast aluminum base and steel wear plate. Its durable design resists bending or warping, ensuring precise and consistent cuts, day after day. Features: * EVOMAX ultra long life cermet carbide blade has been independently tested to deliver over 3,500 cuts * EVOMAX Intelligent Motor Technology, with active blade speed optimization, increases cuts per blade by up to 30 percent * Shadow line cutting guide shows the exact cutting path for supreme cutting accuracy, reliability, and peace of mind * E-brake prevents injuries by stopping the blade within 2 to 3 seconds once the trigger is released * Soft start motor minimizes mechanical stress on the motor during startup, extending cutting life and reducing the risk of tripping some U.S. breakers. By smoothing the initial peak current, the soft start helps prevent excessive current surges as the blade reaches full speed * Cast iron fence is exceptionally durable and resistant to warping or bending, ensuring consistent precision over long-term use * Powerful 15-amp motor to tackle the toughest cuts * ACME vice thread, engineered for enhanced strength and durability, surpasses standard vice threads in robustness and performance * Ergonomic, ambidextrous trigger with comfortable textured grip * Quick-release vice with robust square-threaded rod for fast and secure clamping * Compact design with a head lock-down pin and carry handle for easy transportation * V-block workpiece clamp insert for secure fixation of square tube * Easy blade change with integrated tool storage

Not Yet Reviewed

$600.00

OEM Automotive Tools Telescopic Transmission Jacks

OEM Automotive Tools telescopic transmission jacks and a good hydraulic lift take the hassle out of pulling your vehicle's transmission. These heavy-duty steel jacks feature strong safety chains, tilt-adjustable saddles, and four heavy-duty castors on a wide base. The jacks come in handy for many uses around the shop, and their manual hydraulic systems make lifting and lowering items smooth and seamless. Whether they're being used for pulling, test fits, or installing, OEM telescopic transmission jacks make the job easier. They're available in models with different height ranges.

4.79 out of 5 stars ( 14 )

$599.99

Summit Racing™ Multi-Process TIG Welders

Summit Racing™ multi-process TIG welders can work with aluminum, stainless steel, carbon steel, and more. They feature an IGBT inverter for maximum duty cycles, four mode adjustments for AC balance, TIG welding current, current down slope, and gas time. Additional features: * 4.5 ft. ground clamp cable * TIG torch with 9 ft. lead * Electrode holder for stick welding with 6.6 ft. lead * Wire slag brush * Hand-held welding mask * 220 V power cord with 120 V adapter * Gas regulator * 3 ft. gas line * Foot pedal

Not Yet Reviewed

$699.99

Allstar Performance Heated Tire Groovers

Allstar Performance heated tire groovers include various sizes of tapered, razor-sharp blades to quickly add traction to your rubber! Allstar groovers are available in various models, including the popular 1,000 watt unit with four settings; the "all-in-one" version with built-in temperature controls; and the 220 V groover intended for international use. If your tires need a little more bite, turn up the heat and get your groove on!

4.0 out of 5 stars ( 1 )

$629.99

—

$679.99

Mr. Heater Big Maxx Garage/Shop Unit Heaters

Mr. Heater Big Maxx garage heaters will give you some much-needed heat in your garage or shop. Highly efficient and cost effective, these unit heaters are available for both propane and natural gas fuel sources with easy installation and quiet operation for your workshop or warehouse. Mr. Heater Big Maxx heaters are CSA certified and can be mounted up out of the way leaving you valuable floor space. Work in warmth all winter long; install a Mr. Heater Big Maxx heater.

4.38 out of 5 stars ( 16 )

$516.99

—

$639.99

OTC Robinair RG3 Portable Refrigerant Recovery Machines

OTC Robinair RG3 portable refrigerant recovery machines are the new standard in refrigerant recovery. OTC knows all jobs are different—from a rooftop to a marine HVAC system—and the RG3 units are easy to use and ideal for any residential and appliance sized recovery job! Capable of recovering both liquid and vapor refrigerant, they are engineered to withstand the punishment of daily use, even under extreme conditions. RG3 portable refrigerant recovery machine features include: * Easy to operate, rugged case with easy-to-read gauges, comfortable handle and simple two valve controls * Compact and lightweight (40 percent smaller footprint, easy to carry, weighs approximately 18 lbs.) * Oil-less compressor is capable of recovering both liquid and vapor * Handles almost all refrigerants (works with all common CFC, HFC, HCFC refrigerants including R-410A) * High-efficiency cross-flow design; layout of fan and condenser is maximized for shorter cycle times * High-pressure safety shut-off switch automatically shuts-off machine if pressure rises above 550 psi * IEC connector and power cord

5.0 out of 5 stars ( 3 )

$574.99

DeVilbiss CT Series Desiccant Dryers

When the time comes to paint your vehicle, the last things you want in your air lines are water, oil, and dirt. DeVilbiss CT Series desiccant dryers remove water vapors from compressed air to a dew point of -40 degrees F. The special fiber media in their 10 lb. quick-change cartridge bags removes oil aerosols and solid particles down to .01 microns. Oil, water, and dirt particles can ruin a paint job. When you want a nice spray paint finish the first time, include one of these DeVilbiss CT Series desiccant dryers in the process. .

5.0 out of 5 stars ( 2 )

$741.99

OTC Hydraulic Rams

OTC high performance hydraulic rams are made for strength, safety, and performance. These OTC hydraulic rams feature threaded ram collars and internal base threads to simplify mounting, as well as threaded piston rod ends. These hydraulic rams are a great replacement for worn-out leaky rams on body and frame equipment.

5.0 out of 5 stars ( 2 )

$694.99

Lenco Uni-Spot III Welder Attachments

There is no need to disconnect the dual-spot cable assembly when using Lenco Uni-Spot III welder attachment with your LENCO spot welder. You just need to connect the trigger switch plug on the attachment you wish to use. With the Uni-Spot III attachment, there are no consumables to buy or shop air needed for cooling. Spot weld difficult to reach areas quickly and easily making factory type spot welds. Uni-Spot III can: * Eliminate warpage * Eliminate distortion * Reduce weld clean-up * Welds two combined pieces of 18-gauge auto body stock * Pinch type welds from both sides are ideal for drip rails, door openings, trunk lips, and roof skin

5.0 out of 5 stars ( 1 )

$586.99

Mr. Heater Garage/Shop Radiant Heaters

Wishing you could work all winter in your unattached garage/shop without bundling up? Or, maybe you've been thinking how nice it would be to get into a warm car when the snows piling up outside? Well, wish and think no more! Mr. Heater garage/shop radiant heaters provide high efficient, cost effective warmth for your workshops, garages, green houses, farm buildings and more. These radiant heaters emit instant, clean, odor-free infrared heat to keep you comfortable and since several models require no electricity you'll remain cozy even during a power outage. Mr. Heater garage/shop radiant heaters are all metal construction; CSA certified and includes all necessary hardware and brackets for an easy installation. Available in propane and natural gas options, these quiet-operating garage/shop radiant heaters from Mr. Heater are soon to become one of your favorite tools.

4.54 out of 5 stars ( 28 )

$520.99

—

$559.99

BendPak Hydraulic Cylinder Assemblies

To maintain your BendPak lifts, they offer serviceable parts and components. BendPak's hydraulic cylinder assemblies are the correct replacements for several of their lifts, and the cylinders will provide the same fit and zero-leak performance as the originals they are replacing. Keep your lift moving up and down smoothly with the proper BendPak cylinder assembly designed for your lift.

4.57 out of 5 stars ( 7 )

$749.99

Motor Guard Magna-Spot 1550 Deluxe Kits

Motor Guard Magna-Spot 1550 deluxe kits are loaded for professional collision repair. These ultimate dent-removing tools include the basics you need, plus the extras you want, to do the best job possible. Magna-Spot 1550 guns utilize a new low-heat transformer to handle the high-strength steel uni-body vehicles of today. Plus, they virtually eliminate "burn-through." These stud welders are designed for the instant welding of draw pins, molding rivets, and for the "shrinking" of stressed material. They're lightweight and have an ergonomic design to work comfortably all day. Motor Guard also adds their exclusive MPS--Magna Pin System--that secures the pin in the electrode, plus provides convenient on-the-case storage of pins. Motor Guard Magna-Spot 1550 deluxe kits provide a lot of pluses to offer you unequaled quality. Your deluxe kit will be delivered with: * Magna-Spot 1550 gun * Heavy-duty slide hammer * Molded case * 3 electrodes * 250 2.0mm and 250 2.5mm draw pins * 150 rivets * Magna clamp * Magna T-puller * Magna Wire electrode kit * Magna pin system

4.8 out of 5 stars ( 5 )

$539.99

Evolution S14CPS Metal Cutting Chop Saws

Evolution S14CPS metal cutting chop saws empower you and professional fabricators to achieve the most efficient cutting results with extended blade life, unmatched cut quality, and absolute precision. Evolution's awesome EVOMAX cutting-edge enhancements, plus many other great features, make these cold-cut saws the ideal choice for your best ever metal cutting experience. The S14CPS metal cutting chop saws are lightweight, economical, have a 14 in. blade capacity, and are built with a pressed steel base offering excellent strength and durability. Its solid construction resists bending, providing consistent and reliable cuts day after day. Features: * EVOMAX ultra long life cermet carbide blade has been independently tested to deliver over 3,500 cuts * EVOMAX Intelligent Motor Technology, with active blade speed optimization, increases cuts per blade by up to 30 percent * Shadow line cutting guide shows the exact cutting path for supreme cutting accuracy, reliability, and peace of mind * E-brake prevents injuries by stopping the blade within 2 to 3 seconds once the trigger is released * Soft start motor minimizes mechanical stress on the motor during startup, extending cutting life and reducing the risk of tripping some U.S. breakers. By smoothing the initial peak current, the soft start helps prevent excessive current surges as the blade reaches full speed * Cast iron fence is exceptionally durable and resistant to warping or bending, ensuring consistent precision over long-term use * Powerful 15-amp motor to tackle the toughest cuts * ACME vice thread, engineered for enhanced strength and durability, surpasses standard vice threads in robustness and performance * Ergonomic, ambidextrous trigger with comfortable textured grip * Quick-release vice with robust square-threaded rod for fast and secure clamping * Compact design with a head lock-down pin and carry handle for easy transportation * V-block workpiece clamp insert for secure fixation of square tube * Easy blade change with integrated tool storage

Not Yet Reviewed

$500.99

OTC Stinger Air/Hydraulic Pumps

Do you need a replacement switch for your hydraulic-controlled equipment? OTC manufactured switches are made from durable materials that can withstand the demands of today's work environments. These OTC switches include a 10 ft. cord and can be ordered for on-the-floor operation or a fixed mount.

Not Yet Reviewed

$538.99

Mittler Brothers Shrinker/Stretcher with Foot Operation Stand

Mittler Brothers' shrinker/stretcher with foot operation stand leaves your hands free to move the metal. These quality-built sheetmetal tools allow you to work the metal to the perfect angle. Shrink metal for inside angles, and stretch it for outside angles easily, using your hands and feet with Mittler Brothers foot-operated shrinker/stretcher shop machines. Maximum capacities: * 16 gauge (.059 in.) Mild Steel * 14 gauge (.064 in.) Aluminum * 19 gauge (.043 in.) Stainless

4.0 out of 5 stars ( 5 )

$731.99

Allstar Performance Aluminum Pit Jacks

Allstar Performance aluminum pit jacks feature a low profile to roll under the lowest slung race chassis. Constructed from high-quality aluminum, they incorporate a patented hydraulic system, along with a 2-piece handle with a spring detent to stop it at the 12 o'clock position. Allstar Performance aluminum pit jacks roll easily on heavy-duty rear caster wheels.

5.0 out of 5 stars ( 1 )

$639.99

—

$699.99

John Dow Self-Evacuating Oil Drains

John Dow self-evacuating oil drains make fluid removal easier. These drains introduce Auto-Check technology that eliminates the need for manual ball valves to seal the drain before air evacuation. The pressure valve located at the bottom of the down tube automatically closes with air pressure. So, emptying the drain has never been cleaner or more automatic. Plus, these heavy-duty self-evacuating oil drains will catch every bit of oil and leave debris behind through their screened 16 in. funnels. Everyone knows that fast, effective performance in the "pit area" requires a great crew chief. John Dow self-evacuating oil drains will help to make your used oil handling flow efficiently and effortlessly. Order the size and options preferred for your application. John Dow Industries self-evacuating drains feature: * Sight glass gives a quick indication of fluid level * Molded poly tool tray * 4-caster design provides superior stability and mobility * Casters are oil- and chemical-resistant for longer life * 6 ft. discharge hose * Pressure relief safety valve * Models available with lightweight Roto-molded polyethylene or heavy-duty steel tanks

2.0 out of 5 stars ( 1 )

$662.99