Shop Equipment Tools & Shop Equipment - Customizable - Free Shipping on Orders Over $109 at Summit Racing

BendPak HD-9XW Standard Width Extra-Tall Lifts

The space saving design of the 9,000 lb. capacity BendPak HD-9XW is ideal for vehicle storage in residential garages or commercial buildings. It also happens to make a great service lift for smaller shops who still want to do a big business. These lifts are about the size of a typical parking space, helping to maximize floor space. The BendPak HD-9XW is great for storing ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be off the ground. You can finally make use of that wasted vertical space above your car. Additional features include the following: * 9,000 lbs. maximum lifting capacity * Freestanding design * Runways accommodate narrow and standard vehicles * Electric / hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Removable approach ramps for additional drive-under clearance

4.86 out of 5 stars ( 14 )

$6,495.00

EMAX Industrial Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load

4.5 out of 5 stars ( 2 )

$8,394.60

QuickJack 6000ELX Car Lifts

There's a lot you can do with an extra 3 in.--QuickJack 6000ELX car lifts are designed to raise 3 in. taller than previous models and of course, they provide the same portability, safety, and convenience in your garage that QuickJack is known for. They also provide an extended lift point spread (53 to 76 in.) and longer frame length (86.75 in.). Features: * 6,000 lb. capacity * Lifts higher without sacrificing QuickJack's patented super-low profile when fully lowered * Built with 14-gauge steel * Open center design * Automatic safety locks * Integrated ultra-durable urethane rubber wheels that allow you to roll them into position * Easy to store

5.0 out of 5 stars ( 1 )

$2,324.99

iDEAL Equipment Electric/Hydraulic Motorcycle Lift Benches

iDEAL Equipment electric/hydraulic motorcycle lift benches feature a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises. Keeping the safety of the technician in mind, a spring-loaded drop-down panel in the table provides easier access to the rear wheel for service, while a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 31.5 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$3,770.00

iDEAL Equipment Electric/Hydraulic UTV Frame Lift Benches

Premium products at an affordable price. iDEAL Equipment electric/hydraulic UTV frame lift benches are frame engaging utility and all-terrain vehicle lifts allowing for easy wheel and suspension service. Featuring a 2,500 lbs. lift capacity, along with a 24 in. wide x 88.9 in. long platform, with flip-up extension platforms, and a small lift footprint providing a safe, unobstructed work area. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV frame lift benches come with a portable or fixed pedestal control stand and fully operational control panel, with electro-magnetic lock release, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,500 lbs. * Three locking positions * Platform is 88.9 in. Long x 24 in. wide * 4.75 in. minimum height * 43 in. maximum lift height * Load bearing hinged platform extensions * Four 4.75 in. x 6.5 in. rubber contact lift pads included * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,070.00

iDEAL Equipment Electric/Hydraulic UTV Lift Benches

Designed to fit the largest UTVs, iDEAL Equipment electric/hydraulic UTV lift benches feature a 2,200 lbs. capacity, along with a 65 in. x 88.6 in. platform. Featuring newly designed drive on pivot ramps that fold down and out of the way to become wheel stops. While an innovative retractable center ramp slides out of the way making for a safe, unobstructed workspace. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV lift benches UTV side extensions incorporate innovative center drop panels providing unmatched service access, including motorcycle service, without removing the extensions. A single point hand-held pendant controls raising or lowering the bench, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 65 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,920.00

On Sale

iDEAL Equipment 2-Post Clear Floor Lifts

iDEAL Equipment 2-post clear floor lifts are premium vehicle lifts featuring low profile swing arms, adjustable height swivel pads, and single point cable lock release. The rigid construction and arm configuration provides for stable lifting, making them perfect for super-duty and light-duty trucks along with most passenger cars. Available in two styles; bi-symmetric, 3-stage, 180-degree rotatable lift arms, with direct 'pull' drive cylinders, and a lift capacity of 10,000 lbs. or symmetric lift arms, with direct "push" drive cylinders, and a lift capacity of 12,000 lbs. iDEAL Equipment 2-post clear floor lifts are ALI certified, equipped with automatic arm restraints, hose guards, door guards, and finished with a durable powdercoat finish for a high-quality lift at a terrific value! Features and benefits: * Adjustable height swivel pads * Stackable height adapters * Certified Duro power unit * Limited warranty, 5-year structural and 1-year parts

Not Yet Reviewed

$5,270.00

$4,970.00

Ranger RWB-2S Workbenches

Ranger RWB-2S workbenches offer dedicated work areas designed to handle the physical rigors of any busy shop or garage. These full-size models feature two long high-quality shelves for storage and 14 sq. ft. of bench top to work efficiently. Their durable electrostatic oven-baked powdercoat, ensures a chip-free, weather and chemical-resistant surface area that will last for many years of productive ownership. RWB-2S workbenches provide the best in quality, size, and time-tested Ranger durability. Additional features: * Glossy, red finish * Rolled edges for added strength and rigidity * 5/32 in. heavy-duty rolled edge steel tabletop * 3/32 in. heavy-duty rolled edge steel shelves

Not Yet Reviewed

$950.00

On Sale

Ranger RS-500DS Parts Washers

The Ranger RS-500DS parts washers are designed with professional-grade features, including dual water heaters, adjustable thermostat, automatic low-water shut-off, stainless steel oil skimmer, and more to demonstrate Ranger's commitment to enhanced performance and productivity. These stainless-steel spray wash cabinets rapidly degrease all of the dirty parts in your garage or shop. From larger truck and SUV engine components, to even your smallest nuts and bolts, the Ranger RS-500DS spray wash cabinets will make your car parts shine like new! Features and specifications: * 50-gallon tank with heavy-duty stainless steel construction * Powdercoat finish specifically designed to resist rust * Neoprene-sealed wash cabinet is sealed with a leak-proof neoprene door that creates an edge-to-edge seal and prevents water and steam from escaping—keeping steam inside creates a better water retention which improves cleaning efficiency * Centrifugal commercial-grade pump/motor combination—made of high-quality parts like the rust-resistant stainless steel impellers and screw nuts (pump and motor is over-designed to last) * Contamination-proof interior welds cover the full perimeter of the inside of the spray wash cabinet, perfectly sealing the wash are from the detergent tank, and preventing any potential cross contamination that could potentially cause clogging is redirected and filtered out, eliminating downtime, and helping to make maintenance a breeze * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 180 degrees F * Hot cleaning—a nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * Automatic low water shutoff—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable parts tree and components basket is ideal for smaller cleaning components—instantly expands cabinet space and makes cleaning nuts, bolts, and screws as easy as placing them in the basket * Removable tank screen makes monthly maintenance easy, keeping your parts washer clean and ready to go * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm * Heavy-duty non-marring casters are impervious to harsh conditions and roll smoothly without leaving any marks behind—the casters provide easy movement, giving you the freedom to reposition your parts washer anywhere with ease and have an easy lock and release system that allows you to place your parts washer anywhere in the garage or shop * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * Friction-drive turntable system provides the power behind the parts washer which helps to eliminate potential motor damage by reducing the risk of jamming components

Not Yet Reviewed

$14,895.00

$14,295.00

On Sale

Ranger 1 1/2 Ton Transmission Jacks

When it comes to your behemoth of a transmission, let Ranger do the heavy lifting! Ranger super-duty 1 1/2 ton transmission jacks have an incredible 3,000 lb. lifting capacity--so they're designed for those jobs when a normal transmission jack just doesn't cut it! Features: * Foot operated pump * Alloy-plated ram * Two-stage design * Extra-wide base * Safety overload system * Adjustable saddle tilts two ways * Saddle slides the other two ways * Heavy-duty steel swivel casters * Two push/pull handles * Heavy steel construction for maximum durability * Sealed hydraulic unit prevents contamination * Double-sealed hydraulics for longer service life * Heavy-duty chain anchors keep loads secure * Two-stage design provides an extended lifting height of over 79 in. * Steel roller bearings are included underneath the table and on the ends of the adjustment screw to minimize friction * Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch * System overload system prevents the jacks from being used beyond their rated capacity * Extra-wide base * Four heavy-duty swivel ball bearing casters provide a low center of gravity and maneuverability

3.0 out of 5 stars ( 2 )

$1,100.00

$1,025.00

On Sale

Ranger RS-750DS Parts Washers

The Ranger RS-750DS parts washers have a 53-gallon tank and come with the latest features for rapidly degreasing the biggest car parts around—making it the ultimate answer to degreasing car parts of any shape or size. Built to last, these stainless steel spray wash cabinets allow for more space to fit more parts in at a time. With the extra room, you can clean and degrease automotive parts faster than ever before! Features and specs: * 53-gallon tank with heavy-duty stainless steel construction and powdercoat finish to resist rust * Commercial-grade pump/motor combination provides washing power—made of high-quality parts like the rust-resistant stainless steel impellers—while the centrifugal pump does all the heavy lifting (a protective covering comprised of 100 percent ductile cast iron and silicon carbide seals keep the machinery inside safe and dry) * Wash cabinet is sealed with a leak-proof neoprene door—creates an edge-to-edge seal and prevents water and steam from escaping to create better water retention which improves cleaning efficiency * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 175 degrees F * Safety switch and timer dial for a functional machine that is both safe and efficient * A nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * Contamination-proof interior welds prevents even microscopic debris from getting into the recirculating tank to help ensure nozzles and pumps remain unclogged, redirecting unwanted debris to the trap and filter * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Automatic low water shutoff feature cuts the power when the water level gets too low, saving your dual heaters from any potential damage—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable tree rack and components basket is essential for small parts and for maximizing parts washing space, the tree rack installs and removes easily instantly extending tank space and provides space for smaller parts like bolts, nuts, and screws * Convenient tank drain pipes help you maintain your spray wash cabinet by preventing debris from accumulating on the bottom * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm and can be easily removed to gain access to the cleansing tank for maintenance * Non-marring casters make maneuvering even this bulky piece of equipment a breeze and the urethane casters ensure that your floor remains safe * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * A friction-drive turntable is the system behind the parts washer, and it cuts out the risk of motor damage by preventing jams that might otherwise occur within the cabinet and tank

Not Yet Reviewed

$15,895.00

$15,295.00

Ranger 10-Ton Long Frame Floor Jacks

Ranger 10-ton long frame floor jacks are designed for extreme lifting. These hydraulic jacks will safely lift vehicles up to 23 in. in the air, with a weight capacity of up to 20,000 lbs. They're perfect for servicing truck fleets, buses, farming or heavy construction equipment, and other vehicles that require access to very low areas. Additional features include an alloy-plated ram, a safety overload system (to prevent sudden collapse), and heavy-duty swivel casters for easy maneuvering in tight spaces. The pump handle can also be locked in 3 different towing positions, and the foot pedal control makes setup and lifting a breeze. Built to last from durable heavy steel, Ranger 10-ton long frame floor jacks offer a long lifting life that won't let you down.

Not Yet Reviewed

$1,725.00

Ranger DST2420 Wheel Balancers

Ranger DST2420 wheel balancers are highly accurate and dependable, featuring proprietary digital sensor technology for critical reliability and repeatability. They're built with a gritty toughness that guarantees perfectly balanced wheels day after day, around the clock. Like all of the DST Series wheel balancers, these units feature a proven direct-axis drive system--accurate to within hundredths of an ounce, ensuring that your wheels are balanced and vibration-free. The Ranger DST2420 balancers automatically calculate the exact weight needed to achieve optimal balance for almost every tire and wheel configuration on the planet; and brightly displayed LEDs mark the exact amount and location in just six seconds. A full menu of time-saving features--including dynamic, static, and performance alloy settings--allows you to balance OEM wheel configurations and performance wheels with minimal effort and speed.

5.0 out of 5 stars ( 1 )

$3,295.00

Ranger Folding Engine Hoists

Ranger folding engine hoists are useful lifting equipment for general shop use. Even if you only use one from time to time, the ability to remove the legs and store the unit in a more compact form is convenient. They have a lifting range from 1 to 93 in., a wide base for maximum stability, and heavy steel construction for maximum strength. Features include: * 4-hole position boom—reinforced to increase strength and eliminate flex * Heavy-duty 8-ton long ram * 6 wheels for added mobility * Heavy-duty steel casters for easy positioning * Front casters include a safety brake to prevent movement * Telescopic boom provides 4 positions * Includes heavy steel hook with safety latch

4.67 out of 5 stars ( 6 )

$625.00

Ranger R76LT Tire Changers

If your general repair shop is looking for a swift tire changer that is fast, safe, and easy to use, the Ranger R80EX is the equipment your shop needs. The Ranger R76LT eliminates some of the add-ons that are specifically made to assist operators with tricky run-flats, low-profile tires, and particularly stubborn beads. Most passenger vehicle and pick-up tires don't have those problems, so this machine's tilt-back design simply offers what you want, and nothing more. The professional-grade R76LT features a large turntable that provides an internal clamping capacity of 30 in. and an external clamping capacity of 26 inches. A sturdy body, rigid 45mm hexagonal vertical shaft and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the likelihood of expensive wheels getting damaged. Bead seating and tire inflation is simple and effortless with Ranger's exclusive TurboBlast portable bead seating system. For ease of use, ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending. Key features and specs: * 3 hp (220 VAC 50-60 Hz) motor * Advanced drive belt system—spreads wear evenly throughout the machine, so belt functionality is not weakened over time, and the entire system is protected by the tire changer chassis * (4) clamps (internal/external) * Dual pneumatic cylinders prevent the equipment from vibrating too much, less movement means less friction— cushions are installed to soften the end of each stroke, preserving the seals, wear bands and piston rods so the whole design is self-lubricating and easy to maintain * Adjustable pneumatic blade * Tilt-Back Tower design * Vertical shaft/Tool head positioning * Inflation system/Inflation gauge and integrated air dump valve * Inflation pressure regulator/limiter * Water Filter * Oiler/Lubricator * Air regulator * Bead tool/Tire iron * Multi-functional alloy-steel mount-demount head—makes it easy to switch between functions without making adjustments. The tool head is gentle on tire beads when removing and replacing tires * Durable nylon mount-demount head is exceptionally good at protecting alloy rims and custom wheels * Large Soap Bucket/Soap brush * Powerful, TurboBlast bead seating system * Tool tray/Bin storage * Motorcycle turntable clamps (optional)

Not Yet Reviewed

$3,586.99

BendPak MDS-6EXT Mid-Rise Open-Center Car Lifts

The BendPak MDS-6EXT mid-rise open-center car lifts are the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak MDS-6EXT mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions. The next generation of electric vehicles has arrived, and it didn't go unnoticed by BendPak that the lifting points of these vehicles are very different. Using long-wheelbase vehicles, which includes some very popular electric cars, as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can't do better than this BendPak model. Specifications for the BendPak MDS-6EXT mid-rise open-center car lifts: * Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Powdercoat finish provides a long-lasting durable finish * Comes standard with four durable cushioned and rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity * Solid steel safety lock bars engage automatically during ascent * Convenient stainless steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button (requires min. 50 psi, 10 cfm air source at time of installation) * A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas

Not Yet Reviewed

$8,295.00

On Sale

BendPak LR-1000 Low-Rise Lifts

BendPak LR-1000 low-rise lifts are your solution for quick maintenance and increased productivity when servicing today's passenger cars and light trucks. From tire and brake service … to vehicle detailing and body repair, these lifts will facilitate your work on a wide variety of vehicles. Additional facts and specs: * Low-profile height that accommodates most vehicles, including sports cars, race cars, and larger trucks and SUVs * Single-point safety release make this lift easy to operate and very safe to use * Dropped crossbar in the center provides added vehicle drive-over clearance. Suspension work, oil changes, wheel and brake service, and detailing are easier than ever * Industrial-grade hydraulic cylinder * Solid rubber lift blocks

Not Yet Reviewed

$5,495.00

$5,095.00

BendPak MLS-18 High Jack Stands

The BendPak MLS-18 high jack stands are designed to support raised heavy-duty vehicles and facilitate maintenance and inspection procedures. These support stands are designed to be used in sets of four, six, or eight, and must be placed under a level, raised vehicle at the support points designated by the vehicle manufacturer. For extra support exactly where you need it most, count on the BendPak MLS-18 mobile high-lift jack stands. They're capable of holding up to 18,000 lbs. each. The high jack stands are sold individually, order the quantity needed. Features and specs: * Tripod design evenly distributes weight under load * Each leg is equipped with an 11 sq. in. floor pad * Can be easily moved and placed under a vehicle by means of two 3 in. diameter wheels * Equipped with a foldaway transport handle * Center tube is spring-assisted to facilitate adjustment of the stand * Adjustable from 48.7 in. up to 74.5 in. * 9-pin positions * 1-inch diameter self-locking ACME screw for fine adjustment of the stand height

Not Yet Reviewed

$1,325.00

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$4,578.90

—

$5,725.00

iDEAL Equipment Open Front Paint Spray Booths

iDEAL 'A-Frame' Open Front Paint Spray Booths are economic, commercial-grade open front units designed to provide optimal 'airflow' with superior lighting for high-quality spray painting and finishing applications. They're a great solution for industrial batch-type and automated production-type finishing systems. Air flows through the open front section of the booth, then passes through the work area toward the rear of booth into the filtered exhaust chamber. Filtered exhaust air is then drawn through the exhaust plenum and discharged upward through the exhaust fan and ducting. The booths are easily installed with heavy-duty, precision-punched 18-gauge panels, allowing for quick nut and bolt assembly. Each booth is standard with a bright white powdercoat finish, deluxe control panel, premium exhaust filters, hinged glass light fixtures, and high-quality tube-axial exhaust fan. Features and specs: * Commercial-grade design for optimal airflow and lighting coverage * Deluxe control panel included * White powdercoat panel finish (inside and outside) * Heavy-duty, precision-punched 18-gauge panel construction * Convenient 5/16 in. bolt and serrated lock nut assembly * UL Listed Dayton 24 in. tube-axial exhaust fan with spark-resistant fan blades * NEMA rated 2 hp, 3 phase, 230/460 V AC 60hz motor standard * Premium AFC exhaust filters * LDPI industrial light fixtures with inside access hinged glass door * (2) LPDI industrial (CLS1 / Div. 2) light fixtures – UL and ETL (Groups A, B, C, and D) * True 'daylight color' with GE T8 48 in. fluorescent lamps 32 watts, 2900 lumens, 5000K * Optimal airflow with CFM 7,983 at .5 static pressure * Inside dimensions: 13 ft. wide x 8 ft. 6 in. high x 7 ft. 6 in. deep * All assembly hardware, manometer, and sealant included * Meets or exceeds all applicable OSHA and HFPA 33 regulations * Easy to install, operate, and maintain

Not Yet Reviewed

$9,050.00

iDEAL Equipment Electric/Hydraulic ATV Lift Benches

iDEAL Equipment electric/hydraulic ATV lift benches are up to the challenge of lifting all ATVs on the market today. Featuring a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises and become wheels stops. Keeping the safety of the technician in mind, a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. Long x 50 in. wide * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,410.00

BendPak Turf Maintenance Lift Accessory Kits

BendPak turf maintenance lift accessory kits are the most versatile utility vehicle and lawn maintenance two-post lift turf kits in existence. They fit the GP-7 Series, XPR-9S, XPR-10S, and XPR-10XLS two-post lifts and won't crowd your floor while you work beneath a turf maintenance vehicle. From utility carts to mowers, the fully adjustable wheel pan and fork assemblies fit a wide variety of wheel arrangements including dual or single wheeled turf vehicles. Easily switch back to your standard swing arm assembly when you need to convert back to a 2-post lift for vehicles.

Not Yet Reviewed

$4,995.00

On Sale

BendPak Steel Approach Ramps

BendPak steel approach ramps make it easier to get your low-profile car on to the lift without risk of damage. Their ramps offer heavy-duty construction, extended lengths, a low-rise design, a textured surface for better tire grip, and extra width to support big wheels and vehicles. BendPak ramps include brackets and necessary hardware to set them up. Choose a pair of ramps designed for your BendPak lift.

2.0 out of 5 stars ( 1 )

$4,295.00

$1,550.00

—

$3,895.00

BendPak PCL-18B Cross Beams

BendPak's PCL-18B cross beams for their portable column lifting systems connect two mobile column lifts, allowing you to lift most heavy-duty commercial vehicles safely and securely. Featuring single-piece construction, these chassis support beams have rugged stainless steel frames with a rust-, chemical-, and abrasion-resistant finish. Each BendPak cross beam has an 18,000 lb. capacity and lifts vehicle from the chassis frame, giving you complete wheels-free access to perform a variety of wheel maintenance.

Not Yet Reviewed

$5,595.00