Power Tools Tools & Shop Equipment

Summit Racing™ 20V Multi-Purpose Inflators

Summit Racing™ 20V cordless multi-purpose inflators are ideal for jobsite or on-the-go use. These units can operate on multiple power sources—120V AC, 12V DC, or 20V battery, allowing you to inflate many items whether in your home, on the road, or in the backyard. Our rugged multi-purpose inflators are equipped with easy-to-use buttons and an ergonomic handle for comfortable carrying. Additional features and benefits: * Digital pressure readout with automatic shut-off * High-volume/high-pressure settings * Bright LED light illuminates your work area * Built-in storage compartment for accessories * Automatic shut-off stops the unit once the desired pressure is reached * View the current and desired air pressure, day or night, with digital backlit display * Available as a bare tool, tool with battery, or tool with battery and charger

4.0 out of 5 stars ( 4 )

$100.98

—

$120.87

Milwaukee M12 FUEL Cordless Lithium-Ion Straight Die Grinders

Milwaukee M12 FUEL cordless lithium-ion straight die grinders deliver 20 percent more power than pneumatic competition and feature POWERSTATE Brushless Motor Technology. They provide you with up to 0.3 hp performance, with best-in-class size to help fit in tight work spaces—and offer you greater mobility and access. Built for endurance, these heavy-duty cordless tools are both versatile and tough, and feature a 3-mode speed control and responsive variable-speed trigger, giving you unmatched control! (This M12 FUEL 1/4 in. cordless straight die grinder is also sold in a kit with batter, charger, and carrying case, if you prefer.) M12 FUEL lithium-ion straight die grinder features and specs: * 0.3 hp motor output * Max rpm: 20,000 * 1/4 in. collet, 1/8 in. compatible * Runs on REDLITHIUM CP2.0 battery (not included) * 12 V power source * Rated for 2 in. size accessories * Optimized rpm setting for most common accessories * Dial-in the right max rpm for safer operation * Mode 1 = 10,000, Mode 2 = 15,000, and Mode 3 =20,000 rpm * Replaces compressors and air hoses (no air hoses, compressors or daily maintenance required)

4.75 out of 5 stars ( 4 )

$229.00

Dorman CV Joint Boot Installation Tools

If you've had grease leaking from one of the outer CV joint boots, it's time to swap them out. You can replace them without dismantling the driveshaft with Dorman CV joint installation tools and really shorten the work time. Simply cut off your old boot and clean away the grease, then install the new boot with this single-button operation tool hooked up to an air compressor. These tools safely expand neoprene CV boots up to the proper size in seconds. Dorman kits include CV boots, grease, clamps, 1/4 in. NPT air hose nipple, and instruction sheet. Use the proper tools to remove and install CV boots—or take all day doing it the old-fashioned way.

4.38 out of 5 stars ( 8 )

$217.16

—

$266.99

Milwaukee M12 FUEL 1/4 in. Right Angle Die Grinders

Milwaukee Tools M12 FUEL 1/4 in. right angle die grinders delivers the performance and size professional service mechanics demand. Delivering 20 percent more power than pneumatic models, the M12 FUEL versions feature 4-mode speed control to dial in the correct maximum rpm for your job and safer operation. Their compact size, along with no air hoses or compressors necessary, offers greater mobility and access to tight spaces. They are designed and engineered with Milwaukee POWERSTATE Brushless Motor Technology, REDLINK PLUS Intelligence hardware and software, and REDLITHIUM batteries to deliver more work over the course of the day. Milwaukee Tools M12 FUEL right angle die grinders are sold individually with wrench or in kits that also include batteries, charger, and carrying case. Features may include: * Cordless die grinder with 0.3 hp motor output * Variable-speed trigger * M12 REDLITHIUM CP2.0 batteries (kit only) * M12 Lithium-ion battery charger (kit only)

5.0 out of 5 stars ( 3 )

$318.99

Milwaukee M18 FUEL 1 in. High-Torque Impact Wrenches with ONE-KEY

Milwaukee M18 FUEL 1 in. high-torque impact wrenches with ONE-KEY feature a POWERSTATE brushless motor that delivers up to 1,800 lb.-ft. of nut-busting torque and 1,500 lb.-ft. of fastening torque, making them powerful cordless tools to complete the most demanding applications. At only 12.9 lbs. with battery, the tool is up to 7 lbs. lighter than corded units, and since they are battery-powered you get the convenience of a cordless tool, too. There is no need for compressors or generators which means lower energy costs, and with no cord or hose, you have greater portability and the ability to complete applications where a corded or pneumatic unit could not go. Milwaukee M18 FUEL high-torque impact wrenches are ONE-KEY compatible, providing you with the ability to customize, track, and manage tools for increased productivity and investment protection. They are offered with tool, handle, and lanyard loop or in a kit that also includes batteries and charger. Additional features: * 4-Mode DRIVE CONTROL provides greater control over output speed and power * REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge * Handle rotates 270 degrees and easily adjusts without a tool * LED light to illuminate the work area * Premium rubber overmold withstands corrosive materials and provides increased comfort when in use

Not Yet Reviewed

$899.00

Milwaukee M18 FUEL 16-Gauge Straight Finish Nailers

Milwaukee M18 FUEL 16-Gauge Straight Finish Nailers deliver on the promise of peak productivity at your worksite, providing unmatched driving power, speed and efficiency—with practically no setup and minimal maintenance. Using the exceptional application speed, power and durability of the compact Powerstate brushless motor, plus a ready-to-fire cylinder design, these tools are capable of fully sinking 2 1/2 in. nails into solid oak with zero ramp-up time. The 18 V nailers operate from the revolutionary REDLITHIUM battery for unbeatable strength and run-time, eliminating the mess and cost of gas cartridges. They also include REDLINK PLUS Intelligence, the most advanced electronic system on the market, to prevent damage to the nailer and battery from overloading and overheating. M18 FUEL nailers not only prime you for top performance--they also create the experience of a pneumatic nailer that professional carpenters and remodelers expect, without the hassle of compressors and hoses. * This is the tool and belt clip only. You could order the complete kit if you also want a charger, battery, and contractor bag. * Milwaukee Powerstate brushless motor provides more power, more run-time, and longer life. * REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.

Not Yet Reviewed

$379.00

Milwaukee M18 FUEL 15-Gauge Finish Nailers

Milwaukee M18 FUEL 15-gauge finish nailers deliver on the promise of peak productivity at your worksite, providing unmatched driving power, speed, and efficiency—with practically no setup and minimal maintenance. Using the exceptional application speed, power and durability of Milwaukee's compact POWERSTATE brushless motor, plus Milwaukee's ready-to-fire cylinder design, this tool is capable of fully sinking 2 1/2 in. nails into solid oak with zero ramp-up time. The 18-volt nailers operate from the revolutionary REDLITHIUM battery (included in kit only) for unbeatable strength and run-time, eliminating the mess and cost of gas cartridges. The REDLINK PLUS intelligence, the most advanced electronic system on the market, helps to prevent damage to the nailer and battery from overloading and overheating. The M18 FUEL nailers not only primes you for top performance, but they also create the experience of a pneumatic nailer that both professional carpenters and remodelers alike expect—without the hassle of compressors and hoses.

Not Yet Reviewed

$379.00

Milwaukee M18 FUEL 16-Gauge Angled Finish Nailers

Milwaukee M18 FUEL 16-gauge angled finish nailers deliver on the promise of peak productivity at your worksite, providing unmatched driving power, speed, and efficiency. Along with the exceptional application of speed and power, is the durability of Milwaukee's compact POWERSTATE brushless motor and their ready-to-fire cylinder design that makes M18 FUEL nailers capable of fully sinking 2 1/2 in. nails into solid oak with zero ramp-up time. Operating with the revolutionary REDLITHIUM battery, these 18 V nailers have unbeatable strength and run-time, eliminating the mess and cost of gas cartridges. The REDLINK PLUS Intelligence prevents damage to the nailer and battery from overloading and overheating. Milwaukee M18 FUEL 16-gauge angled finish nailers provides top performance without the hassle of compressors and hoses. They are available as tool only with belt clip or as a kit that also includes battery, charger, and contractor bag.

Not Yet Reviewed

$379.00

Milwaukee M12 23-Gauge Pin Nailers

The Milwaukee M12 23-gauge pin nailers are the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand—without the hassle of a compressor hose or gas cartridge. The M12 pin nailer drives 23-gauge headless pin nails ranging in length from 1/2 in. up to 1 3/8 in., and when paired with Milwaukee's M12 REDLITHIUM CP1.5 battery pack offers all-day run time with up to 750 pin nails per charge. This battery-powered pin nailer also features a magazine reload indicator, tool-free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries Milwaukee's industry-leading 3-year limited power tool warranty. Tool is available as the bare tool only or as a kit that comes with the M12 pin nailer, battery pack, charger and contractor bag. Additional features: * Provides unmatched productivity and accessibility in tight spaces and confined corners with a lightweight, ergonomic design * Nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes * Double-action trigger and non-marring precision point tip allows you to perform sequential driving and accurate pin placement into delicate trim pieces * Dry-fire lockout feature prevents misfires and workpiece damage * Tool-free drive depth adjustment * Reversible belt clip * Fits all M12 batteries (sold separately from bare tool or comes in kit)

Not Yet Reviewed

$299.00

Performance Tool 12 V Tire Inflators

Inflate tires and check pressure with Performance Tool 12 V tire inflators, featuring a built-in LED light. They can inflate a standard 195/65/R15 car tire from 25 to 35 psi in under 2 minutes and a completely flat tire to 35 psi in 8 minutes. Part of their Vortex line, these tire inflators are equipped with upgraded metal cylinders for faster heat dissipation, lower noise, and longer service life. Additional features and benefits: * Large, easy-to-read, pressure gauge with a maximum reading of 60 psi, 4.2 kg/cm2, or 4.1 BAR * Equipped with a 10 ft. (3 m) power cord and 18 in. (45 cm) high-pressure braided air hose to easily reach all four tires on any standard passenger vehicle * Easy-to-use lever-locking air chuck is TPMS tire sensor safe and includes three air adapters: sports ball needle, raft nozzle, and toy inflator * Built-in LED light turns on as soon as power is connected to verify connection and provides visibility and increased safety for roadside emergencies at night * Includes: Compressor, 3-piece nozzle set, replacement 15-amp fuse, and manual

Not Yet Reviewed

$17.99

Viking Dual Piston Straight Line Sanders

Viking dual piston straight line sanders are ideal for those hard-to-reach areas. Their smaller size reduces operator fatigue and adapts well to all types of sanding needs. The pneumatic tools accept 1/4 in. NPT air compressor hoses and operate between 90-100 psi. These sanders remove material from large areas quickly and efficiently with smooth operation. They're ideal for the surface preparation of fiberglass, sheet metal, steel body putty, or wood.

5.0 out of 5 stars ( 2 )

$221.99

Milwaukee M12 FUEL Cordless Lithium-Ion Straight Die Grinder Kits

Milwaukee M12 FUEL cordless lithium-ion straight die grinder kits include the 1/4 in. die grinder tool, REDLITHIUM battery, battery charger, and carrying case. The cordless grinder delivers 20 percent more power than pneumatic competition and features POWERSTATE Brushless Motor Technology. It provides you with up to 0.3 hp performance, with best-in-class size (compact) to help fit in tight work spaces—for greater mobility and access. Built for endurance, this tool is both versatile and tough, and features a 3-mode speed control and responsive variable-speed trigger, giving you unmatched control! (The die grinder tool is also available separately, apart from the kit, if you prefer.) Features and specs for M12 FUEL straight die grinder kits: * Includes M12 FUEL cordless 1/4 in. straight die grinder, M12 REDLITHIUM CP2.0 battery, M12 lithium-ion battery charger, and carrying case * 0.3 hp motor output * 12 V power source * Dial-in the right max rpm for safer operation * Mode 1 = 10,000, Mode 2 = 15,000, and Mode 3 =20,000 rpm * Optimized rpm setting for most common accessories * 1/4 in. collet, 1/8 in. compatible * Rated for 2 in. size accessories * Replaces compressors and air hoses (no air hoses, compressors or daily maintenance required)

Not Yet Reviewed

$349.00

12 Results Found For "compressor"