Availability
Shock Absorber Socket, Steel, 6.5mm Double D, 7.5mm Double D, 9/16 in./15mm, Set of 3
Part Number: OES-25038
Estimated Ship Date: Today
Estimated Ship Date: Today
Sander, Sanding Block, Scuff Block, EVA Rubber, .50 in. Height, 2.50 in. Width, 5.325 in. Length, Each
Part Number: DUK-TAI-AF4405
Estimated Ship Date: Today
Estimated Ship Date: Today
Torque Wrench, Steel, Chrome, 3/8 in. Drive, 30-250 in.-lbs., Micrometer, Each
Part Number: GRW-85061M
Not Yet Reviewed
Estimated Ship Date: Today
Estimated Ship Date: Today
Brass Punches, .625 in. Diameter x 8 in. Long, .750 in. Diameter x 10 in. Long, Set
Part Number: OTC-4602
Estimated Ship Date: Today
Estimated Ship Date: Today
Cleco Pliers, 20 Cleco Pins, 3/16 in., Kit
Part Number: SUM-G1855-1
Not Yet Reviewed
Estimated Ship Date: Today
Estimated Ship Date: Today
Puller, Grip-O-Matic, 2/3-Jaw, 13-Ton, Steel, Heat Treated, 15.25 in. Reach, 17.00 in. Spread, Each
Part Number: OTC-1042
Grease Gun, Lever Handle, 14 oz. Cartridge Capacity, 18 in. Hose Length, Each
Part Number: SUM-900345
Estimated Ship Date: Today
Estimated Ship Date: Today
Flashlight, Hand Held, Stinger HL, LED, Aluminum, Black/Blue, Rechargeable, Each
Part Number: STI-75476
Not Yet Reviewed
Cannot be shipped Internationally
Cannot be shipped Internationally
Air Conditioning Service Tool, Pneumatic Vacuum Pump, 1.3 CFM, R-12/R-134a, Each
Part Number: FJC-6900
Not Yet Reviewed
Estimated Ship Date: Today
Estimated Ship Date: Today
Socket Set, Impact, PACKOUT, 3/8 in. Drive, Standard, Deep Well, Steel, Black Oxide, 6-Point, Case, Set
Part Number: MWT-49-66-6800
Not Yet Reviewed
Estimated Ship Date: Today
Estimated Ship Date: Today
Welding Table, Screw Insert, Clamp, 4.72", Each
Part Number: SUM-900667
Not Yet Reviewed
Estimated Ship Date: Today
Estimated Ship Date: Today
Pulling Hook, Steel, Fits Slide Hammers with 5/8 in. - 18 Thread, Each
Part Number: OTC-6541
Estimated Ship Date: Today
Estimated Ship Date: Today
Funnel, Transmission Drain, Rectangle, Plastic, Black, 24 in. x 36 in. Funnel Opening, Each
Part Number: LIL-17902
Estimated Ship Date: Today
Estimated Ship Date: Today
Punch and Chisels, Chrome Vanadium Steel, Natural, Punch Gauge, Set of 16
Part Number: APT-1600
Estimated Ship Date: Today
Estimated Ship Date: Today
Pliers, Hose Clamp, Steel, 2-Pliers, 2 Hose Removal Tools, Steel, Black, Set
Part Number: OTC-4502
Estimated Ship Date: Today
Estimated Ship Date: Today
Outer Tie Rod Remover/Ball Joint Separator, Drop-Forged Steel, 3 in. Reach/Spread, Each
Part Number: OTC-7503
Estimated Ship Date: Today
Estimated Ship Date: Today
Spark Plug Boot Removal Pliers, Double Offset, Each
Part Number: LIL-51420
Estimated Ship Date: Today
Estimated Ship Date: Today
Impact Sockets, Driveline, Metric, 9-piece, Steel, Black, 12-point, 1/2 in. Drive, Red Plastic Case, Set
Part Number: SXT-2695
Estimated Ship Date: Today
Estimated Ship Date: Today
Pulley Removal and Installation Tools, Power Steering Pulley Installer, Steel, Black Oxide Finish, 3/8 in.-16 Thread Screw, 5/8 in. Hex, Ford, Each
Part Number: WMR-W87021
Estimated Ship Date: Today
Estimated Ship Date: Today
Spindle Nut Sockets, 4WD Lock Nut Tool, 2.625 in. Socket, 6 Slot Design, 1/2 in. Drive, Chromoly, Black Oxide, Manual Use Only, Chevy, Ford, Each
Part Number: WMR-W1270
Estimated Ship Date: Today
Estimated Ship Date: Today
Steering Wheel Pullers, Alloy Steel, Natural Finish, SAE/Metric Hardware, 3 in. Reach, 4 in. Wide Span, with Washers, Busing, Kit
Part Number: WMR-W150
Estimated Ship Date: Today
Estimated Ship Date: Today
Slide Hammer Puller, 5/8 in.- 18 RH Thread, 24 in. Length, 2.5 lbs, Each
Part Number: OTC-1156
Estimated Ship Date: Today
Estimated Ship Date: Today
Clutch Alignment Tool, 1.125 in. Diameter, 26-Spline, 0.735 in. Pilot, Plastic, Black, Each
Part Number: ACL-AT107
Estimated Ship Date: Today
Estimated Ship Date: Today
Oil Jug, 10 Quarts, Plastic, Each
Part Number: OES-87018
Not Yet Reviewed
Estimated Ship Date: Today
Estimated Ship Date: Today
M18 FUEL ANGLER Pulling Fish Tape Drum, Steel, 240 ft., Red/Black Plastic Housing, Each
Part Number: MWT-48-44-5178
Not Yet Reviewed
Estimated Ship Date: Sep 29, 2025 if ordered today
Estimated Ship Date: Sep 29, 2025 if ordered today
Modal Header
Call To Order
This is a custom order part. You can order this part by Contacting Us.