Availability
Mechanics, Metalworking & Specialty Tools
Showing In Stock Items. Show All 34 Items.
Sonnax Regulator Valve Reamers
Sonnax regulator valve reamers provide a consistent bore finish where quality is essential. For the professional and amateur alike, these high-speed steel reamer tool kits include drill jig and reamer.
( 2 )
$186.99
TransGo Reducing Regulator Reamer And Guide Tools
Reducing valve bore within a transmission valve body can wear out over time, causing hard shifting, fault codes, and solenoid failures. TransGo reducing regulator reamer and guide tools provide an inexpensive solution for repairing regulator valve bores to eliminate further issues. These reamer tools are made from high-quality steel to ensure durability when drilling and are the same type of tool that can be found within the TransGo shift kits.
Not Yet Reviewed
$90.00
—
$145.80
Lisle Injector Pressure Regulator Sockets
Remove and replace the IPR on your diesel engine with Lisle injector pressure regulator sockets. Located in a very tight location, the right tools will help make this job a lot easier. Lisle IPR sockets are built to bottom-out on the hex, so as not to put torque on the connector in case it can be reused.
( 6 )
$40.99
TransGo Oversized S4 Regulator Valve Reamers
TransGo oversized S4 regulator valve reamers are specialized, high-quality steel tools designed to re-size the S4 regulator valve bore in 2018-and-later GM 8L45 and 8L90 transmissions. They're used in conjunction with the oversized S4 valve kit to correct wear-related shift issues, clunks, and hydraulic leaks without replacing the valve body. Additional details: * Reams the worn valve body bore to accommodate the oversized hardened steel S4 regulator valve, restoring proper hydraulic seal * Specifically for 2018+ GM 8L45 and 8L90 transmissions featuring the 2-land S4 valve design * Fixes 1-2 or 1-3 harsh/slipping shifts, and clunking on coast-downshifts * The tool includes a guide to ensure proper alignment and is reusable, reducing the need for expensive, dedicated machine fixtures
Not Yet Reviewed
$141.71
OTC Injector Pressure Regulator Sockets
OTC injector pressure regulator sockets (for 6.0 Fords) combine two OE tools into one. The configuration for the IPR changed in 2005, leading to the development of two models for these tools. However, OTC's aftermarket engineers worked with specialized technicians and developed one tool that addresses either version of the IPR. OTC injector pressure regulator sockets provide today's technicians with cost-effective tools for their collection.
Not Yet Reviewed
$73.99
Master Appliance Micro Torches
These Master Appliance micro torches allow you to put 2,500 degrees F precisely where you want the heat. Adjust the flame from broad to pinpoint, and you're ready for up to two hours of burn time. These torches have a self-igniting system with a safety lock to prevent accidental starts and a wide, stable base for hands-free tabletop operation. Use these Master Appliance micro torches to shrink tubing, solder/desolder, heat, melt, ignite, and more! Each and every one of these Master Appliance micro torches meets CPSC child safety requirements and is shipped empty.
( 9 )
$30.99
OTC DEF Refractometers
OTC DEF refractometers make it quick and easy for an operator or technician to get an accurate measurement of urea concentration in DEF (Diesel Exhaust Fluid) or AdBlue. EPA regulations require all diesel engines manufactured on or after January 1, 2010 to meet lowered NOx emissions standards. Most heavy-duty engine (Class 7-8 trucks) manufacturers, have chosen to utilize SCR—Selective Catalytic Reduction. This Includes Detroit Diesel (DD13, DD15, and DD16 models), Cummins (ISX line), PACCAR, and Volvo/Mack. SCR-equipped engines require the periodic addition of DEF (a urea solution) to enable the process. DEF is available in a bottle from most truck stops, and some have installed bulk DEF dispensers near the diesel fuel pumps. However, to ensure the proper operation of the SCR system, operators must certify the DEF in their vehicle consists of a 32.5 percent urea/water solution—the job of your OTC DEF refractometer.
( 2 )
$120.99
Streamlight Stinger HL Flashlights
The Streamlight Stinger LED HL flashlights are a high-lumen flashlight that provides 800 lumens of maximum illumination. Their wide beam pattern gives you a bright flood light that will light up the area around you. Product features: * Machined aircraft aluminum body with non-slip rubberized comfort grip; anti-roll rubber ring included * Unbreakable polycarbonate lens with scratch-resistant coating * IPX4 water-resistant; 1 meter impact resistance tested for durability * Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination * Optimized electronics provide regulated intensity throughout battery charge * 3-cell, 3.6 Volt Ni-MH sub-C battery, rechargeable up to 1,000 times * Multi-function on/off push-button switch lets you choose three lighting modes and strobe: -- High for maximum illumination: 800 lumens; 310m beam -- Medium for intense brightness and longer run time: 400 lumens; 219m beam -- Low extended run time: 200 lumens; 155 meter beam -- Strobe for signaling or disorienting runs 3 hours * Choice of charging options available: -- Steady charger fully recharges within approx. 16 hours -- Smart charger—fully recharges within 4.5 hours (5 V/1A USB input) or 3 hours (12 V DC input) -- Smart 'Piggyback' charger fully recharges within 7.5 hours (5 V/1A USB input) or 4 hours (12 V DC input) * Serialized for positive identification
Not Yet Reviewed
$167.97
Lisle Turbo Air System Test Kits with Smoke Adapter
Lisle turbo air system test kits include T-adapter for connecting smoke machines to help locate leaks. The kits plug the output side of the turbo and the intake inlet, then air and smoke are applied through one adapter to show the presence of leaks within the system. The kits feature a pressure gauge, shut-off valve, pressure regulator, and stepped adapters. Lisle turbo air system test kits are available in a 14-piece kit for cars and light trucks and a 10-piece kit to fit most turbo systems on light-duty trucks and Class 7 and 8 semis. These patent pending kits can also be used on some cooling system hoses.
Not Yet Reviewed
$333.99
Streamlight Wedge Slim Everyday Carry Flashlights
The Streamlight Wedge Slim everyday carry flashlights are a compact, high-performance EDC light designed for clean pocket carry. Made of rugged anodized aluminum with a waterproof USB-C port, the Wedge balances durability with performance and is outfitted with an intuitive rotating thumb switch that provides tactile control over the constant-on mode and THRO (Temporarily Heightened Regulated Output) mode. Product features: * These rechargeable handheld flashlights are great for hardware/tool use, industrial, Law Enforcement, Security, automotive, Sporting Goods, and the general consumer * Durable, anodized aluminum construction; polycarbonate lens * IPX7 waterproof to 3.28 ft. (1m); 3.28 ft. (1m) impact resistance tested for durability * Thin, ergonomic design fits comfortably in your hand and provides clean pocket carry * Grooved for a sure grip * Rotatable switch with battery level indicator * Deep carry pocket clip attaches on either side of light * USB-C rechargeable * Lithium polymer battery charges in 3 hours * Includes: USB cord and a wrist Lanyard * Features two lighting modes—Constant on and THRO (Temporarily Heightened Regulated Output) mode for maximum brightness: -- Constant on 300 lumens; 69m beam -- THRO: 1,000 lumens; 110m beam; 35 second burst
( 1 )
$118.99
Titan Automatic Center Punches
Center punches mark your workpiece with a dimple, providing a starting point that prevents drill bits from wandering. Titan automatic center punches can be used on various metals and woods, and deliver an automatic spring-driven strike when pressed down against the surface. These hand-operated tools feature an adjustable tensioner that allows you to rotate body of center punch to regulate striking force, and a ball end for greater gripping power and reduced hand fatigue.
Not Yet Reviewed
$10.99
Dorman Rivet Guns
Dorman rivet guns are designed to allow you to install multiple rivet sizes, eliminating the need to switch rivet guns every time a different size rivet is needed on the same project. These rivet guns have an open-end wrench with a long handle for extra leverage—and a storage bottle attaches to the handle to store your rivets. This model is recommended to aid in the installation of window regulators. Use it to get the project done in record time!
( 7 )
$15.99
Performance Tool Power Windshield Removal Tools
Performance Tool power windshield removal tools are ideal for windshield removal and cutting sealants and molding. These air knives feature a variable-speed safety throttle with a built-in regulator for precise speed control. Their flexible blades mount in 12 positions for ease of use. Performance Tool power windshield removal tools come with a 10 in. lead hose with an exhaust cover.
Not Yet Reviewed
$115.99
Lincoln Industrial Model 960 Air Blow Guns
Lincoln's Model 960 air blow guns have a lightweight cast aluminum pistol grip with thumb-button design that provides ease of operation. They are used for applications requiring compressed air like removal of debris, non-contact drying and blowing, and attach to the airline, which delivers a steady stream of compressed air. The Model 960 features a 1/4 in. NPT inlet and 7/64 in. outlet diameter with 5 3/4 in. height. The nozzle outlet pressure 30 psi maximum complies with Federal Safety Regulation 50-204.8 and OSHA 1910 242.B. Lincoln is recognized as the industry standard for performance and value—and is the first choice of professional mechanics everywhere.
Not Yet Reviewed
$109.99
Milton Plastic Door Wedges
Milton plastic door wedges are a versatile tool that are a basic part of any lockout specialist tool kit. The door wedges are used to assist in inserting LO-AW air wedge between door and frame on vehicles. The door wedges main purpose is to safely separate the door panel from the vehicle window but can also be used to hold the door window during window regulator work.
Not Yet Reviewed
$4.99
OTC Vacuum/Pressure System Tester Kits
OTC vacuum/pressure system testers can immediately diagnose leaks in pressure and vacuum systems. Diagnose EGR valves, fuel pressure regulators, thermal and electric vacuum switches, turbocharger waste gates, heating and ventilation control valves, central locking systems, MAP sensors, and more. OTC includes quick-dial diagnostic pump tool, silicon-like hoses, black rubber adapters, and blue plastic adapters. Features: * 2-way pressure and vacuum test functions * Intuitive rotary dial mode switches from pressure to vacuum with a simple click * Integrated rear mount gauge and optimal viewing angle * Testing up to 30 psi pressure and up to 28 in Hg vacuum * High-quality silicon material hoses with quick-couple fittings * Lifetime Warranty
Not Yet Reviewed
$211.99
Astro Pneumatic Tool Company Universal Air Powered Cooling System Testers
Astro Tools universal air powered cooling system testers are designed to use shop air to pressurize and test cooling systems and caps to the manufacturer's suggested levels. The quick connector works on nearly all brands of cooling system testing caps and adapters. Gauge displays the common pressure levels for different cooling systems up to 30 psi max. Product Overview: * Pressure regulates shop air pressure to test and locate cooling system leaks, test caps, or speed up the coolant draining process * Fills even large cooling system almost instantly, and provides constant pressure on leaks to trace their source * Quick connector—works on nearly all brands of cooling system testing caps and adapters * Easy-to-read gauge—displays the common pressures levels for different cooling systems and regulator will max at 30 psi to prevent damage * Pressure regulating valve—easy turn knob adjustment * Swivel hose
Not Yet Reviewed
$41.99
Lincoln Industrial Model 950 Air Blow Guns
Lincoln's Model 950 air blow guns have the same great features as Lincoln's Model 840—except with an air restrictor. These air blow guns are used for applications requiring compressed air like removal of debris, non-contact drying and blowing, and attach to the airline, which delivers a steady stream of compressed air. The nozzle outlet pressure 30 psi maximum complies with Federal Safety Regulation 50-204.8 and OSHA 1910 242.B. Lincoln Industrial is recognized as the industry standard for performance equipment and value—and is the first choice of professional mechanics everywhere.
Not Yet Reviewed
$46.99
Lincoln Industrial Model 940 Air Blow Guns
Lincoln's Model 940 air blow guns offer the same great features as Lincoln's Model 960 blow guns—less air restrictor. These air blow guns are used for applications requiring compressed air like removal of debris, non-contact drying and blowing, and attach to the airline, which delivers a steady stream of compressed air. Note, when used for large cleaning requirement or chip cleaning, regulated air pressure must not exceed Federal recommended maximum. Lincoln is recognized as the industry standard for performance and value—and is the first choice of professional mechanics everywhere.
Not Yet Reviewed
$89.99
Sonnax Reamers
Sonnax reamers include everything you need to modify your transmission valve body. Sonnax makes reamers and kits for almost all of their accumulator pistons and related automotive machining jobs.
( 2 )
$213.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster