Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Mechanics, Metalworking & Specialty Tools
Showing In Stock Items. Show All 31 Items.
Summit Racing™ Flywheel Holding Tools
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 12 )
$46.99
Nickky Bobby Exhaust Gasket O-Ring Cutting Tools
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
Moroso Harmonic Balancer Installation and Removal Tool Adapters
Moroso harmonic balancer installation and removal tool adapters are designed to work with the GM LS and LT Series of engines. These adapters make it possible for you to install and remove GM LS and LT harmonic balancers quickly and easily, without causing damage. These strong steel threaded adapters have a durable black oxide finish for long-lasting service.
Not Yet Reviewed
$100.99
Performance Tool Torsion Bar Unloading Tools
Safely unload torsion bar keys for replacement or adjustment with Performance Tool torsion bar unloading tools. These premium tools feature a larger C-frame opening to accommodate beefier torsion bars and are engineered to handle GM's K-3500 series trucks with heavy-duty chassis and larger torsion bars. The torsion bar unloading tools are manufactured from heavy-duty forged steel with larger 7/8 in. diameter threaded screws.
( 20 )
$41.99
Centerforce Clutch Alignment Tools
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 76 )
$7.95
RAM Clutch Billet Steel Alignment Tools
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 55 )
$49.00
SuspensionMAXX Super T Torsion Bar Tools
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
OTC GM Torsion Bar Unloading Tools
These OTC torsion bar unloading tools are manufactured with a larger C-frame opening to be used on trucks with heavy-duty chassis and larger torsion bars. The OTC GM torsion bar unloading tools hold the torsion bar while you make the adjustments.
( 15 )
$112.99
OTC Flywheel Holders
OTC flywheel holders are specialty tools that mount in place of the starter and engage the flywheel ring gear teeth. They hold the flywheel/engine stationary during removal of the hub bolt which must be removed to service the pulley assembly.
( 1 )
$84.99
OTC Ford Rear Main Seal Installers
These OTC rear main seal installers ensure that the rear main seal is set to the correct depth of the crankshaft. The OTC installers fit over the seal and attach to the engine crankshaft with the two bolts included. By alternatively tightening the bolts, the seal is pulled into place quickly, easily, and with no damage to the rear main seal.
( 4 )
$154.99
Cal-Van Tools Harmonic Balancer Pullers
Cal-Van harmonic balancer pullers deliver special performance to make your job easier. Their selection is ultimately designed to assist you in properly installing and removing balancers, vibration dampers, pulleys, and gears. Cal-Van offers devices that are designed to work in tight engine compartments, and designs with extra-long reach for installation of underdrive and oversized pulleys. They also have master sets available that work as a traditional harmonic balancer installer, as well as on long reach applications.
( 3 )
$59.99
Yukon Gear & Axle Inner Axle Side Seal Installation Tools
Yukon Gear & Axle inner axle side seal installation tools ease the frustration of getting your axle seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your Dana axles with the right tools--Yukon Gear & Axle inner axle side seal installation tools.
( 9 )
$221.99
Dorman Clutch Alignment Tools
Dorman offers a broad spectrum of specialty tools for repair and maintenance on your vehicle, including these precision-made clutch alignment tools. These alignment tools properly align the clutch disk between the pressure plate and the flywheel, before pressure plate is bolted down, for trouble-free clutch alignment and installation.
( 6 )
$3.99
ACT Clutch Alignment Tools
Install your ACT clutch kit easier and more accurately with the proper ACT clutch alignment tools. These alignment tools will make quick work of centering the clutch disc and keeping it stationary with the flywheel as you install the pressure plate over it. Make your clutch installation simple and precise using ACT clutch alignment tools.
( 47 )
$4.00
ReadyLift Suspension Torsion Key Unloading Tools
When it comes to safely loading and unloading GM, Ford, and Dodge torsion keys, nothing beats ReadyLift's professional-grade torsion key removal tools. These tools make removing and installing torsion keys safe and easy, allowing for the adjustment or replacement of GM torsion keys in as little as 15 minutes per truck. The forged and hardened steel used in the construction of these tools has been lab-tested for strength and safety and is okay for use with air tools. They can be used with Dodge and Ford trucks. Dodge trucks require an adapter plate, which is included with all Dodge ReadyLift torsion key kits.
( 2 )
$159.95
Lingenfelter Performance Engineering LSA Supercharger Pulley Removal and Installation Kits
Lingenfelter Performance Engineering LSA Supercharger pulley removal and installation kits can be configured to remove a supercharger pulley on the GM LSA supercharger snout—for a quick and easy job. After all, time is money and this kit will save you both! The specialized tools are precision-machined from the highest-quality billet aluminum to offer years of service.
( 1 )
$419.99
Lisle GM Caster Camber Kits
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$81.99
OTC Injector Rail Assembly Removers
OTC injector rail assembly removers are used for removal of the direct injection fuel rail without damaging the unit. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount assembly. OTC injector rail assembly removers include the remover, stud adapter, and L-hook and are specific to 2007-14 General Motors Direct Injection engines.
Not Yet Reviewed
$191.99
Klein Tools Hex Key Caddy Sets
Klein Tools hex key caddy sets conveniently consolidate the most popular sizes into one compact case. Available in SAE or Metric, chamfered-end or ball-end styles, these long arm, industrial strength keys offer extended reach and a secure flexible, folding case to ensure easy access, while providing sleek adaptable storage to interlock different cases together. The hex key sets with chamfered ends are designed for high engagement with fasteners, and the ball-end hex keys work effectively with angles up to 25 degrees. Select the sets you would like to have in your tool arsenal. Additional features: * Heat-treated and tempered CR-V steel hex keys for added strength and durability * Rust-resistant black phosphate coating on every key * Secure storage with internal locking mechanism to prevent loss of keys * Twist-to-Lock case for hassle-free hex key removal * Cross-compatible, interlocking cases offers ability to stack with other Twist-to-Lock cases
Not Yet Reviewed
$12.98
Yukon Gear & Axle Pinion Yoke Holders
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
Yukon Gear & Axle Carrier Bearing Pullers
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
MotoRad Cooling System Pressure Testers
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$106.99
McGard Spline Drive Lug Nut Sockets
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 25 )
$13.99
