Availability
Showing In Stock Items. Show All 90 Items.
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 8 )
$45.99
OTC axle shaft seal installers for are designed for use on select Ford F-Series Super Duty trucks that have a vacuum-operated front axle. The drivers are built into the installers, saving you time and money! They correctly install the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage.
( 27 )
$143.99
Spanner wrenches are a must-have tool for adjusting your coilover shock absorbers. RideTech's wrenches grip the retainer under the spring to spin it and adjust the coil spring up or down. By loosening the small bolt holding the collar, you can turn it with the wrench; no need to unbolt the top of the shock. Correct adjustment of the coil spring preload is a critical step toward improved suspension and handling. RideTech machined spanner wrenches can be used manually or as an attachment on your 3/8 in. ratchet.
( 16 )
$20.00
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 53 )
$49.00
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$107.99
On Sale
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
$292.49
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
—
$22.99
Safely unload torsion bar keys for replacement or adjustment with Performance Tool torsion bar unloading tools. These premium tools feature a larger C-frame opening to accommodate beefier torsion bars and are engineered to handle GM's K-3500 series trucks with heavy-duty chassis and larger torsion bars. The torsion bar unloading tools are manufactured from heavy-duty forged steel with larger 7/8 in. diameter threaded screws.
( 20 )
$40.99
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
OTC fuel tank lock ring wrenches are a universal design that allows tools to fit fuel tank lock rings on a range of vehicles. Used with a drive ratchet or breaker bar, they easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
( 12 )
$87.99
Astro Pneumatic Tool Company Subaru ball joint pullers are perfect for pulling difficult to remove, seized, rusted, and/or corroded bolt-in Subaru ball joints. They're designed for easy use with vehicles on jack stands using a deep 24mm socket and impact or hand wrench or use included 5/8 in.-18 thread adapter with any common slide hammer. Their unique sliding pin, non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage.
( 5 )
$32.99
Manufactured by Excel from Richmond, these axle seal installation tools are designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal. The different inner and outer diameters of the puck part of the tool press can be used on many different seals. This superior quality tool provides more efficiency to save you time and is available in several models to work on a broad range of applications, including Dana 30, 44, 50, 60 and Dana 44 ICA. Choose the axle seal installation tool in the model designed for your application needs.
( 1 )
$79.99
—
$102.99
Lisle heavy-duty pitman arm pullers are designed for the large pitman arms on Ford 250 and 350 trucks. The jaws are forged and heat-treated for strength. Simply position the puller jaws under the pitman arm, and turn center screw to remove. Lisle heavy-duty pitman arm puller specs: * Opening is 1.70 in. * Inside length is 2 5/8 in. * Width is 3.08 in. * Overall length is 3 9/16 in.
Not Yet Reviewed
$33.99
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 75 )
$7.95
OEM Automotive Tools fuel tank lock ring tools are a universal design that allows them to fit fuel tank lock rings on the many vehicles listed in the applications. Used with a drive ratchet or breaker bar, they enable you to easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
Not Yet Reviewed
$34.99
Yukon Gear & Axle inner axle side seal installation tools ease the frustration of getting your axle seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your Dana axles with the right tools--Yukon Gear & Axle inner axle side seal installation tools.
( 9 )
$221.99
OTC supply line removal tools are specialty fuel tools to make your job easier. They remove high-pressure fuel supply tube. Need an assist? Let OTC supply line removal tools help you out.
Not Yet Reviewed
$126.99
OTC's sockets are made from high strength steel and are designed to resist rounding out. Most OTC sockets can be used with an extension and a torque wrench. Available for many applications.
( 19 )
$53.99
TeraFlex lower ball joint preload adjusting tools enable you to easily to adjust the lower ball joint preload amount. This preload tool is a must have for your new or broken-in TeraFlex HD ball joints.
( 1 )
$12.99
Performance Tool spindle nut wrench sets come with everything you need to make quick work of stubborn spindle nuts. They feature vanadium steel and black oxide sockets that fit most 2WD and 4WD light truck applications.
( 1 )
$119.99
South Bend Clutch alignment tools are designed to align the flywheel and clutch disc for trouble-free insertion of the input shaft. The clutch alignment tools are designed to help make the installation of your new clutch much faster and easier and are available for a wide variety of makes, models, and transmissions. Select the tool designed for your specific application needs.
( 1 )
$5.81
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$78.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
