Availability
Showing In Stock Items. Show All 44 Items.
Proform engine rotation adapters rotate the crankshaft the proper way when turning the engine with the balancer already installed. They easily attach to the balancer and come in handy when assembling an engine or degreeing the cam--the crankshaft can be rotated with a 1/2 in. breaker bar or a 1 in. socket and breaker bar.
( 55 )
$27.99
If you have ever assembled an engine and reached the point where the balancer is installed, you've probably discovered that there's no convenient way to turn the engine over. Powerhouse Products offers the perfect solution with these stainless steel engine rotating tools that will allow you to degree your cam with the balancer installed to make the whole process much easier. These engine tools are designed to fit Chevy and Ford V8s and bolt right onto your harmonic balancer to do the job up right. They have provisions for a 1/2 in. drive ratchet or breaker bar and a 1 in. socket.
( 11 )
$49.95
If you have ever assembled an engine and reached the point where the balancer is installed, you've probably discovered that there's no convenient way to turn the engine over. COMP Cams offers the perfect solution with these stainless steel engine rotating tools that will allow you to degree your cam with the balancer installed to make the whole process much easier. The COMP Cams engine rotating tools have provisions for a 1/2 in. drive ratchet or breaker bar and a 1-inch socket. They are designed to fit Chevy and Ford V8s and bolt right onto your harmonic balancer to do the job up right.
Not Yet Reviewed
$49.95
Holley Sniper offers special bushing installation and removal tools for 565-300 Series HyperSpark distributors. The clockwise rotation model is ideal for SBC/BBC, small block Chrysler, and 258ci Jeep applications; while the counterclockwise model will assist with various SBF, Chrysler, and Oldsmobile applications.
( 2 )
$22.92
Cal-Van Tools crankshaft holders provide a quick and easy way to prohibit the crankshaft from turning when you need to loosen or tighten the balancer/pulley bolt on many popular Ford and Mazda vehicles. They will also turn the engine when doing timing work. Their 1/2 in. drive tab allows you to use your favorite ratchet or breaker bar. Cal-Van Tools Ford and Mazda crankshaft holders feature heavy-duty construction and a rust-resistant finish for durability.
Not Yet Reviewed
$59.99
Proform universal piston ring filers come with everything you need to gap your piston rings properly. To ensure proper piston ring end-gap, these piston ring filers enable the user to file piston rings quickly and accurately. Position the piston ring firmly against the dowel pins, and then turn the handle to rotate the abrasive wheel. Using a feeler gauge, file the piston rings to meet the manufacturer's specifications.
( 116 )
$35.99
Our Summit Racing™ harmonic balancer wrenches rotate the crankshaft the proper way when turning the engine with the balancer installed. The cold-rolled steel adapter easily attaches to most balancers and comes in handy when assembling an engine or degreeing a cam. These wrenches require a 3/8 in. or 1/2 in. ratchet or breaker bar to rotate the engine.
( 33 )
$61.99
—
$88.99
Trick Flow® Pro calibrated adjustable pushrod length checkers are the most accurate way to measure pushrod length. Here is how they work: Each checker's designated length range number represents the overall length it can measure from closed through one full inch when fully extended. A laser-etched alignment line identifies each full rotation, while grooves every .050 in. on the inner sleeve keep count of the number of rotations made. For example, when a 7.800-8.800 length checker is turned apart by one rotation, the correct length for the new pushrods required would be 7.850 in. (7.800 + .050 = 7.850). The Trick Flow® checkers are made from high-quality steel alloy with a durable black oxide coating for a lifetime of pushrod length checks. They're available in versions with ball tips or cup tips, and in ranges from 5.800 in. to 12.800 in.
( 68 )
$22.99
—
$26.99
Want to inspect the contaminants that your oil filter has prevented from destroying your engine? It's easy—use one of the Summit Racing™ oil filter cutters to slice open your filter so you can examine the particles trapped inside. Much like a hand-held tubing cutter, these aluminum tools use a cutting wheel and a pair of opposing ball bearings to easily rotate the filters as they cut. You'll be able to cut filters up to 5 1/2 in. in diameter.
( 36 )
$47.99
Summit Racing™ Manufacturing and Engineering harmonic balancer puller and installers feature a roller thrust bearing, a puller plate milled to accept a variety of bolt sizes, and CNC-machined components with a black oxide finish. They come complete with four heat-treated 4140 chromoly installer studs, puller bolts, instructions, and a storage case. The installers include our Summit Racing™ harmonic balancer wrenches to rotate the crankshaft the proper way when turning the engine with the balancer installed. The cold-rolled steel adapter easily attaches to most balancers and comes in handy when assembling an engine or degreeing a cam. These wrenches require a 3/8 in. or 1/2 in. ratchet or breaker bar to rotate the engine.
( 16 )
$235.97
Troubleshooting your oil management system requires looking at the filter. That's now easier than before with these Proform oil filter cutters. Think of a simple can opener and you've got the concept behind these trick tools. The lock-down holds your cartridge filter in place while you rotate the filter to make a clean cut.
( 11 )
$54.99
Proform offers specialty tools to make harmonic balancer installation easier. Just thread the proper end into the crankshaft, and then rotate the nut pressing the bearing against the balancer. This in turn will slide the harmonic balancer onto the crankshaft smoothly. The tools are available in more than a dozen balancer bolt thread sizes, for universal or year/make and engine-specific applications.
( 157 )
$26.99
—
$62.99
Summit Racing™ flywheel turning tools mean no more busted bolts. If you've needed an easier way to torque your flywheel bolts in place, our turning tools are the solution. They're made of black finished steel and fold up for easy storage. They make it possible to turn the flywheel and rotate the engine, as well as hold the flywheel or flexplate when torquing your flywheel or harmonic balancer bolts.
( 62 )
$25.99
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 196 )
$59.95
—
$115.95
Special parts often require special tools. Jesel's pushrod length checking tools are one of those "getting it right" tools for pushrod length checking. The basic body of the tool consists of three pieces of aluminum tubing. The tubing pieces are 5 in., 3 in. and 1.5 in. long. On two pieces of the tubing, one end is male and the other is female and each end is threaded. Outer ends accept a screw-in pushrod ball end. In total, the pushrod length checking tools are adjustable from 6 in. to 12 in. Important note: Before you order new pushrods, first check the pushrod length on several different cylinders, as well as on both engine's cylinder heads to determine sizes. Never rotate valvetrain using the pushrod checker tool.
( 30 )
$40.50
Make it easy to turn your engine's rotating assembly with one of Proform's crankshaft-turning sockets. They're made of non-marring aluminum and accept a 1/2 in. drive breaker bar or drive ratchet. The sockets enable you to rotate the crankshaft in the proper direction when the balancer is off, making your engine assembly much quicker and easier.
( 64 )
$21.99
—
$59.99
Moroso harmonic balancer tools use a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline, for a bind-free installation. Using a thrust bearing and protective washer, the drive nut can rotate freely, allowing the balancer to be pressed on easily.
( 95 )
$71.99
Fluidampr holding tools are an essential addition in the toolbox of any engine builder or technician. Designed specifically for use in automotive shop environments, these durable tools ensure optimal performance and reliability when working with harmonic dampers. With a robust construction, the Fluidampr holding tools provide the stability and support needed for precision work on a variety of engine components. Whether you're performing maintenance or building high-performance engines, the Fluidampr damper holding tool simplifies the process by securely holding dampers in place, allowing for accurate adjustments and installations. Key Features: * Durable construction—tool is CNC-machined from quality quarter-inch steel, then finished in black zinc chromate for corrosion resistance and laser engraved with the Fluidampr logo * Precision support—tool secures dampers for accurate adjustments and installations * Essential tool for engine builders and automotive technicians * Can also be used as a barring tool to rotate the crankshaft with the damper installed * Fluidampr Holding Tool fastens into the accessory drive pulley mounting bolts and accepts a 1/2 in. breaker bar or ratchet * Compatible with most domestic pulley bolt patterns, including Chevy/GM 3.20 in. bolt circle, Ford 3.30 in. and 2.80 in. bolt circles, and Chrysler 2.80 in. bolt circles * Holding tool also works with popular Toyota 2JZ, Nissan RB, Subaru EJ and FA20, Honda B and K Series, and Mazda MZR engines
( 1 )
$57.12
Those first moments that an engine runs prior to building oil pressure are when damage can easily occur. ARP oil pump primer kits let you spin the oil pump with a drill motor and bring up the oil pressure prior to starting the engine. This will prevent unnecessary wear or damage to rotating, reciprocating, and valvetrain components. ARP's rugged primer shafts are rated at 170,000 psi to ensure extended service life. They also feature a special billet aluminum sleeve that accurately positions the shaft and keeps it from wobbling.
( 24 )
$56.99
—
$60.99
These Lisle flywheel turners make it possible to turn the flywheel and rotate the engine. They also hold the flexplate or flywheel in place when torqueing the flywheel or harmonic balancer bolts. They are made of black finished steel and fold up for easy storage. If you've needed an easier way to torque your flywheel bolts down, then these Lisle flywheel turners are your answer.
( 44 )
$34.99
Moroso universal harmonic balancer tools use a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline, for a bind-free installation. Using a thrust bearing and protective washer, the drive nut can rotate freely, allowing the balancer to be pressed on easily.
( 46 )
$71.99
—
$87.99
Motion Pro degree wheels are manufactured from thick aluminum and are clearly marked to accurately measure crankshaft position in degrees of crankshaft rotation. They may be used for checking or adjusting ignition timing, to verify that cams are installed properly in 4-stroke engines, and to determine the port opening and closing of 2-stroke engines. Coordinate the operation of the internal parts of your motorcycle engine to help you achieve optimum performance--and a better ride--with Motion Pro engine timing degree wheels.
( 1 )
$21.99
Make it easy to turn your engine's rotating assembly with one of Milodon's crankshaft sockets. They're made of high-quality steel, accept a 1/2 in. drive breaker bar or drive ratchet, and feature a gold iridited finish for durability. These sockets enable you to rotate the crankshaft in the proper direction when the balancer is off, making your engine assembly much quicker and easier.
( 34 )
$26.95
—
$32.95
Performance Tool spark plug installer and remover tools can make spark plug maintenance much easier! The 13 in. flexible shaft on the spark plug tool permits access to deeply recessed or hard-to-reach locations. With this easy-to-use install/removal tool, the spark plug is started by a hand-driven twist-knob that rotates both the plug and the tip. The soft tip firmly grips the terminal and insulator of all automotive spark plugs. The enlarged thimble allows a great grip and feel to help prevent cross-threading. Avoid burnt or banged-up knuckles, while also saving time reaching hard-to-reach plugs when you use the Performance Tool spark plug install and removal tools.
( 1 )
$22.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
