Availability
Showing In Stock Items. Show All 60 Items.
Allstar Performance engine lift plates are constructed from 1/8 in. thick zinc plated steel for lasting durability and strength. Specifically designed for the LS Series Gen IV GM engines, the plates feature three laser-cut holes for various chain placements—to allow the engine weight to be balanced or offset. An offset position is helpful when angling an engine with a transmission still attached, in or out of a vehicle.
( 11 )
$64.99
Are you honing a cylinder block? GBD Flex-Hone tools from BRM easily solve your deburring and surface finishing problems. These flexible honing tools from Brush Research offer a soft cutting action to produce a superior surface finish for increased performance. Silicon carbide globules are attached to a high-density nylon filament to create a unique construction that allows the abrasive globules to float, making these Flex-Hone tools self-centering and self-aligning to your cylinder bores. BRM has a variety of sizes and grits available to match your needs. Remove peaks and imperfections in your cylinder walls with American-made GBD Flex-Hone tools from BRM.
( 178 )
$84.99
—
$178.99
Holley Sniper offers special bushing installation and removal tools for 565-300 Series HyperSpark distributors. The clockwise rotation model is ideal for SBC/BBC, small block Chrysler, and 258ci Jeep applications; while the counterclockwise model will assist with various SBF, Chrysler, and Oldsmobile applications.
( 1 )
$22.36
Add one of these Summit Racing™ crankshaft holding tools to your arsenal to help torque the harmonic balancer bolt on a GM/LS engine with ease. These special tools are made from durable steel with a zinc coated finish to offer long-lasting service.
( 6 )
$33.99
Put S&S Cycle carburetor jet tools in your hands and make changing the main jet in your S&S Cycle super carburetor a breeze! These handy tools have durable stainless steel construction with natural finish and are perfect for main jet removal on all S&S Cycle carburetors using the 72 Series jets.
Not Yet Reviewed
$25.16
Pioneer cylinder hone guide shoes are bronze guides for the CR /series of hones. They are normally used for a finer finish, as well as on soft or difficult materials. Fit your mandrels with a new pair of guide shoes from Pioneer.
( 1 )
$31.99
Torque plates are bolted to the block deck while honing to simulate the stress applied to the bores when the heads are installed. If a cylinder is bored without a plate, once the head is installed, the bore will no longer be round at the top. Almost all factories routinely do this, as well as most engine shops. But torque plates allow an engine to break in faster, use less oil, and produce a little more power due to better ring sealing. ICT Billet engine block torque plates are specific to engine families and use factory length head bolts and studs. They are made from aerospace-grade billet aluminum.
( 17 )
$429.99
Moroso exhaust block-off storage plates are a convenient way to keep engines sealed up from foreign objects during storage or when painting an engine. They are constructed from durable aluminum, making them lightweight and corrosion-resistant.
( 2 )
$25.99
COMP Cams Pro camshaft degree kits position your camshaft for the ultimate performance! Degree your cams with the cylinder heads off and get the most horsepower and torque possible from your application. COMP Cams Pro camshaft degree kits feature their giant open-design Professional degree wheels machined from 1/4 in. thick aluminum plate and precision-engraved for accurate reads. Set your cams up like a professional with COMP Cams Pro camshaft degree kits.
( 4 )
$481.95
Slowly put down the rubber mallet and do the job the right way with Proform main cap removal tools. LS main caps have very tight tolerances, and cannot be removed by simply grabbing and pulling on them--uniform pressure from both sides is the only way to do this correctly. Each of these handy tools will seat itself on the engine block, and by using a mechanical advantage easily pulls the main caps upward, evenly ... making a challenging job easy. Proform tools feature heavy-duty anodized billet aluminum construction and are beautifully engineered for years of use.
( 2 )
$236.99
Made of strong and durable plastic, these Jaz Products engine block-off kits protect your engine by blocking off open ports during storage or as a work in progress. These kits keep dirt and debris from entering various inlets and outlets on your engine.
( 18 )
$15.99
Make between-rounds valve spring changes quickly and easily with these Summit Racing™ valve spring compressors. With multiple styles to choose from we're sure to have a spring compressor to suit your needs.
( 310 )
$36.99
These dual overhead camshaft lock tools manufactured by Lisle Corporation allow you to lock camshaft sprockets firmly in place during belt and chain replacement. Their unique design uses knurled pins to hold them against the inside of the cam sprockets. The knurled pins align with the sprockets to preserve engine timing during replacement. When replacing your belts and chains, Lisle Corporation camshaft lock tools are your best bet for ease of installation.
( 10 )
$16.99
The timing cover and rear cover on GM LS Series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft. This often leads to annoying leaks at the front damper seal and rear main seal. Summit™ has the solution to leak-free LS engine builds. Summit Racing™ Pro LS cover alignment tools locate or center the seal openings on the front or rear cover when it's installed, ensuring the seal is centered on the crankshaft, preventing leaks and allowing easier installation of the seals.
( 13 )
$45.99
Summit Racing™ Pro LS main cap pullers are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. The tool's design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, a Summit Racing™ Pro LS main cap puller is a must-have.
( 8 )
$200.99
ICT billet LS crankshaft pin drill fixture kits allow you to effortlessly drill and pin your GM LS Series crankshaft and balancer to prevent slip when using a supercharger. Made from high-grade steel, the bits easily drill into the crank and balancer.
( 9 )
$109.99
Summit Racing™ offers Pro LS timing cover alignment tools to locate or center the seal openings on the front or rear cover when it is installed. Ensuring that the seal is centered on the crankshaft will prevent leaks and allow easier installation of the seals. The timing cover and rear cover on GM LS series engines do not have dowel pins to guide correct alignment to the center line of the crankshaft—often leading to annoying leaks at the front damper seal and rear main seal. These tools are an easy solution for leak-free LS engine builds. Order the tool style you prefer.
( 20 )
$30.99
—
$37.99
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$75.65
Fluidampr holding tools are an essential addition in the toolbox of any engine builder or technician. Designed specifically for use in automotive shop environments, these durable tools ensure optimal performance and reliability when working with harmonic dampers. With a robust construction, the Fluidampr holding tools provide the stability and support needed for precision work on a variety of engine components. Whether you're performing maintenance or building high-performance engines, the Fluidampr damper holding tool simplifies the process by securely holding dampers in place, allowing for accurate adjustments and installations. Key Features: * Durable construction—tool is CNC-machined from quality quarter-inch steel, then finished in black zinc chromate for corrosion resistance and laser engraved with the Fluidampr logo * Precision support—tool secures dampers for accurate adjustments and installations * Essential tool for engine builders and automotive technicians * Can also be used as a barring tool to rotate the crankshaft with the damper installed * Fluidampr Holding Tool fastens into the accessory drive pulley mounting bolts and accepts a 1/2 in. breaker bar or ratchet * Compatible with most domestic pulley bolt patterns, including Chevy/GM 3.20 in. bolt circle, Ford 3.30 in. and 2.80 in. bolt circles, and Chrysler 2.80 in. bolt circles * Holding tool also works with popular Toyota 2JZ, Nissan RB, Subaru EJ and FA20, Honda B and K Series, and Mazda MZR engines
Not Yet Reviewed
$57.12
ICT Billet harmonic balancer pullers fit all GM LS Series engines from 1997-2013. They are designed for removing damper pulleys in tight engine compartments without removing the radiator. The kits include a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 10 )
$129.99
ICT Billet has your LS build needs covered, including the tools required. ICT Billet LS timing cover alignment tools help to prevent premature seal failures by properly aligning your timing cover with your crankshaft. The sleeves are made from aerospace grade billet aluminum and are compatible with all GM LS Series engines.
( 1 )
$58.99
Cylinder walls with a superior surface finish will have a series of uniform "scratches" in a crosshatch pattern providing a bearing surface for piston rings and oil retention. When you need to check your honing crosshatch pattern, Total Seal crosshatch angle tool will make it easy. To use these clear plastic cards, line up the 0 (zero) line to top of deck and match lines inside cylinder to the lines on the card. Too flat or too steep of a crosshatch can be problematic, get the right angle with Total Seal crosshatch checking tools.
Not Yet Reviewed
$8.44
Allstar Performance main cap removal tools are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. Their design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, an Allstar main cap removal tool is a must-have.
Not Yet Reviewed
$229.99
S&G Tool Aid offers diesel compression tester adapters for 6.7L Ford applications. Product details include: * Designed for the 2011 and up Ford 6.7L Power Stroke V8 turbocharged diesel engine found in the F-Series vehicles. * 6 in. long hose allows for easy installation and removal around obstructions. * Use the glow plug hole as the testing port. * 8mm-1.00 thread.
( 1 )
$42.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
