Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Building Tools
Showing In Stock Items. Show All 23 Items.
Summit Racing™ Manufacturing Piston Ring Filers
These Summit Racing™ Manufacturing piston ring filers give you a repeatable, precision gap every time. An adjustable ring position locator and fixed front stop keep the position of the rings consistent for the entire set. They also feature a large easy-to-turn handle that's convertible to left hand operation, a high-quality diamond abrasive wheel, and a corrosion-resistant finish.
( 35 )
$172.99
Summit Racing™ Camshaft Bearing Bore Alignment Tools
Summit Racing™ cam bearing alignment tools are simple, sturdy, and take your engine building skill to the next level. These tools bolt to the block and extend out from the #1 cam bearing journal 16 in. They hold the cam bearing knocker's alignment cone perfectly concentric and in-line, ensuring the front cam bearing goes in dead straight every time.
( 1 )
$92.99
On Sale
Moroso Valve Seat Pressure Testers
These Moroso valve seat pressure testers allow you to check the seat pressure on most assembled Chevy and Ford engines with roller rockers. These tools have built-in direct reading scales to eliminate difficult calculations and are accurate to within 3 percent.
( 23 )
$186.99
$168.29
Summit Racing™ Pro LS Rear Cover Alignment Tools
The timing cover and rear cover on GM LS Series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft. This often leads to annoying leaks at the front damper seal and rear main seal. Summit™ has the solution to leak-free LS engine builds. Summit Racing™ Pro LS cover alignment tools locate or center the seal openings on the front or rear cover when it's installed, ensuring the seal is centered on the crankshaft, preventing leaks and allowing easier installation of the seals.
( 14 )
$45.99
Summit Racing™ Pro LS Timing Cover Alignment Tools
Summit Racing™ offers Pro LS timing cover alignment tools to locate or center the seal openings on the front or rear cover when it is installed. Ensuring that the seal is centered on the crankshaft will prevent leaks and allow easier installation of the seals. The timing cover and rear cover on GM LS series engines do not have dowel pins to guide correct alignment to the center line of the crankshaft—often leading to annoying leaks at the front damper seal and rear main seal. These tools are an easy solution for leak-free LS engine builds. Order the tool style you prefer.
( 23 )
$30.99
—
$40.99
Summit Racing™ Piston Ring Filer Combos
The Summit Racing™ piston ring filer combos include a heavy duty piston ring filer and an adjustable ring squaring tool. The ring filer is precision machined with an adjustable ring position locator and a fixed front stop, which keeps the position of the rings during grinding consistent throughout entire set. The adjustable squaring tool is guaranteed to be flat within .001 of an inch. The bore adjustment range of 3.750 in. to 4.650 in. covers many popular engines.
( 7 )
$240.81
Mr. Gasket LS Timing Cover Alignment Tools
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$58.15
—
$64.55
Holley EFI 2 Axis G-Meters
Holley EFI 2 Axis G-meters are designed to be stable in the harshest environments. Co-designed with RacePak, they are a perfect fit for your 4-digit horsepower drag radial machine, or an autocross corner carver. Each of the EFI 2 Axis G-meters feature both X and Y-axis outputs. Holley EFI 2 Axis G-meters feature: * The X-axis registers +/-7.5 G for acceleration and deceleration data acquisition * The Y-axis registers from -3G to +12G for cornering data acquisition * Directional mounting arrow is provided, arrow needs to point forward, towards the front of the vehicle * ECU pins come pre-crimped for simplified installation * Loose pins are also provided if the cable needs to be shortened for clean installations
Not Yet Reviewed
$449.95
Mr. Gasket Rear Main Seal Installation Tools
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$77.55
Lisle Serpentine Belt Stretch Tools
Lisle serpentine belt stretch tools are designed for removal and installation of most stretch belt applications found on many accessory drive systems. They feature unique magnetic faces which hold the belts in place on the pulley. These tools help prevent damage to both the belt and the pulley during removal or installation, and they can be used on the front or back side of the pulley. Select the one designed for your application.
( 6 )
$17.99
—
$30.99
OEM Automotive Tools High Energy Ignition Spark Plug Gap Gauges
An engine tuneup means it's time to use OEM Automotive Tools high energy ignition spark plug gap gauges. They have six precision wire sizes--inches stamped on the front, metric sizes on the back--and will measure spark plug gaps from .040 to .080 in. These handy instruments also include an adjuster to precisely set the gap between the two electrodes for firing efficiently.
( 13 )
$5.99
—
$8.99
COMP Cams Lifter Retaining Tools for GM LS Engine
Help make your next LS engine swap much easier with an assist from COMP Cams lifter retaining tools for GM LS-style engines. These essential tools are designed to help prevent lifters from falling through the bores into the engine during cam swaps. The tools are devised to slide through holes in the front of the engine and holds the lifters securely in their bores. Extra-long design, with an integrated handle, provides plenty of leverage, while the rounded pushrod-style tip eases installation. These tools have a smooth construction made of quality materials, along with the proper outer diameter to help prevent internal engine damage—and it won't leave debris behind.
Not Yet Reviewed
$89.95
OTC Ford Crankshaft Positioning Tools
Avoid jumped time engines with OTC Ford crankshaft positioning tools. These OTC positioning tools install over the crank and engine front cover and align the dowel to position the crankshaft at top dead center, allowing proper positioning for timing chain installation.
( 9 )
$107.99
—
$140.99
COMP Cams Valvetrain Organizer Trays
COMP Cams valvetrain organizer trays are perfect for novice and professional engine builders alike. These durable polymer trays neatly store your valvetrain components while you're assembling or rebuilding your engine. The organizers are labeled, front and rear, to help keep track of your part location for reassembly. Each tray has built-in handles to make easy work of moving parts around your shop or garage. They come available for valve springs or rocker arms.
( 4 )
$74.95
Performance Tool Indexing Oil Seal Pullers
Performance Tool indexing oil seal pullers make removal of seals easier. Made of chrome vanadium steel, these seal pullers feature a black phosphate coating, a 12 in. shaft mounted on a double injection comfort grip handle, and corrosion-resistant, indexing twin hooks. The hooks are quickly adjusted with a press of the button offering 14 different locking positions and 195 degrees of flexibility, making hard-to-reach seals easier to remove, allowing you to work efficiently. Performance Tool indexing oil seal pullers permit servicing of front wheel drive transaxles, camshaft, and crankshaft seals without removing the radiator. They will work on most cars, SUVs, and light- and heavy-duty trucks without damaging the housing or bearing.
Not Yet Reviewed
$27.99
COMP Cams Compound Angle Piston Vises
Make piston work easier with COMP Cams compound angle piston vises. These vises possess a unique compound angle feature; they rotate the piston not only from front to back, but also from side to side—a definite must for Ford and big block Chevy pistons! Made from aluminum and blue anodized, COMP Cams piston vises locate and hold the pistons by two wrist pins. And they're repeatable, which means that once you set up the vises, you're ready to drop in the other pistons and go—even upside-down—for balancing or lightening operations. Let COMP Cams compound angle piston vises help you with your automotive rebuilds.
Not Yet Reviewed
$1,305.95
Lisle Flywheel Stops
Lisle flywheel stops save time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Just remove the rubber inspection cap on the bottom of the transmission, insert the tool at the front of the opening to engage the flywheel, then hand-tighten the bolt to hold the stop in place.
Not Yet Reviewed
$14.99
Performance Tool Wheel Hub Resurfacing Kits
Performance Tool wheel hub resurfacing kits are the quickest way to remove rust build-up. They include a drill-powered holder and sanding pads to resurface wheel hubs and remove rust from lug studs. The kits work on cars, light trucks, and SUVs on front and rear brake hubs and rotors. Features: * 1/4 in. shaft holder connect to the sanding pads and fits a standard power drill * Five sanding pads attach to holder with half turn thread and accept up to 1/2 in. studs * Run at speeds of 2,500 rpm or less for best results
Not Yet Reviewed
$16.99
CTA Tools Volvo Cam Locking Tools
CTA's Volvo cam locking tools are particularly useful for replacing front camshaft and crankshaft oil seals on Volvo white block engines, as they simplify timing belt replacements by locking the camshafts in place, making the process easier and more reliable. These tools help ensure proper timing belt alignment, which is crucial for engine function and smooth operation. The tools are designed with high-hardness materials and a black oxidized surface for superior strength and durability, as well as corrosion resistance.
Not Yet Reviewed
$133.74
Motion Pro T-6 Combo Lever Adapters
Motion Pro T-6 combo lever adapters and hex adapters make your tool(s) more versatile. Adapters are available in various sizes that allow the use of your tool as a 3/8 in. driver with sockets for smaller front axles. They feature lightweight billet 7075 T-6 aluminum construction with a chrome vanadium steel insert, lightening holes, and knurled edges for turning sockets by hand. The T-6 combo lever hex adapters for axle nuts are CNC-machined from 6061 aluminum for precise fit and function. All adapters have a durable anodized finish with laser-engraved size markings for quick selection. Select the one(s) needed for your Motion Pro T-6 combo lever arsenal.
Not Yet Reviewed
$24.99
