Availability
Showing In Stock Items. Show All 52 Items.
Clearance
Performance Tool multipurpose lifts fit your powersports needs and your wallet. With a 1,500 lb. capacity and wide, slip resistant surface you can lift your bike for an oil change and wash quickly, easily, and safely! These solid and sturdy multipurpose lifts also feature easy-rolling steel swivel casters to maneuver your shop or garage with little effort plus a 4-piece tie down set to keep your project secure. Performance Tool multipurpose lifts feature: * 4 1/2 in. to 16 1/2 in. lift range * Two safety bolts ensure stability * Three position locking levers * Non-slip rubber foot pedal * Includes 6 ft. cam buckle tie downs and non-abrasive loop straps
( 3 )
$270.99
$120.50
Mittler Brothers power drive bead rollers help strengthen sheet metal panels while adding a great look to your project. MB rollers add a hem to the edges of the metal eliminating sharp edges that can potentially cut your hands plus, the bead rollers are power-driven. So, unlike the old-fashioned crank models that required one guy to feed the metal and another to turn the crank, you can operate them yourself. Mittler Brothers power drive bead rollers are available in a choice of throat depths, materials, and variable and constant speed models, so there's sure to be a perfect model for your shop. Mittler Brothers power drive bead rollers offer: * Either billet aluminum or jig-welded steel frames * 100+ bead roll profiles * 1 1/8 in. throat height * Adjustable depth of bead * Oilite bushings for long service life * Variable speed foot pedal operation * Forward/reverse switch * Both shafts driven
Not Yet Reviewed
$1,725.00
Mittler Brothers rear-end narrowing tool kits are designed to narrow your vehicle's rear-end for racing or street rod applications using precision-made tools. They include a 1 1/2 in. diameter turned, ground, and polished shaft that is passed through the trimmed rear-end housing (not included) and the inner bearing blocks. This ensures the accurate, square, and true, reinstallation of the housing ends. The kits feature a pinion centering plate and a variety of alignment blocks for specific housing ends, including Ford 9 in., Ford 8.8 in., 10-bolt GM, 12-bolt GM, Dana 44, Dana 60, and 8 3/4 in. Chrysler.
( 11 )
$720.00
AutoTwirler Corvette substitution frame assemblies allow you to put your Corvette on your rotisserie without flexing the body. They have eight body mounts to adjust to any year Corvette and bolts, along with structural grade bolts, readying it for extreme duty. And, you can break it down into smaller sections for easier storage, handling, and assembly. Safely restore your Corvette with substitution frame assemblies from AutoTwirler.
( 3 )
$1,923.99
P-Ayr replica long blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting. Save time, money, and hassle when it comes time to install your next power plant.
( 88 )
$499.99
—
$776.99
Clearance
P-Ayr Replica transmissions are designed to bolt on to the engine for test fitting any fabrication you may need to make to the frame or chassis. They include mounting points to OEM specifications to ensure accuracy, and are made from durable polyurethane foam for long life.
( 30 )
$403.99
—
$522.99
P-Ayr replica short blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting.
( 9 )
$410.99
—
$1,299.99
These Performance tool engine stands are designed to hold engine blocks up to 1,250 lbs. Their stable 4-wheel design features a 360 degree rotating head and locks in 6 positions. Included with these engine stands is a sturdy metal parts tray to hold your small items or nuts and bolts.
( 22 )
$243.99
Clearance
Palmgren bench grinder stands are designed to accommodate 6 in., 7 in., 8 in., and 10 in. bench grinders and bench buffers, as well as 1 in., 2 in. and 4 in. belt grinders. The base and top of the pedestal-style stands are made of heavy-duty cast iron for rigid support and added stability. Additional details: * Unique design allows mounting with four bolts * Three floor-mounting feet with bolt holes * Adjustable steel column is 3.5 in. diameter * Built-in water pot provides quenching for work piece
( 5 )
$182.99
$125.50
Mittler Brothers 5 ton hydraulic bench presses deliver ample force for heavy-duty punching, bending, riveting, squeezing, and other applications to get the job done. These presses have a rugged 3/8 in. plate construction for ample support, especially when working with heavier materials. They're designed with predrilled holes in the base for mounting on a workbench or pedestal. For increased productivity, they use standard punch and dies for oblong, square, or round holes. Mittler Brothers hydraulic bench presses can be used as a standard arbor press, as well. Other features include: * Spring-loaded center * Slug ejector assembly * Lower punch/flare adapter and bolt * Upper punch/flare adapter and bolt * Comes with arbor nut wrench * Bronze bushings * 12 in. throat depth
Not Yet Reviewed
$1,219.00
iDEAL 'A-Frame' Open Front Paint Spray Booths are economic, commercial-grade open front units designed to provide optimal 'airflow' with superior lighting for high-quality spray painting and finishing applications. They're a great solution for industrial batch-type and automated production-type finishing systems. Air flows through the open front section of the booth, then passes through the work area toward the rear of booth into the filtered exhaust chamber. Filtered exhaust air is then drawn through the exhaust plenum and discharged upward through the exhaust fan and ducting. The booths are easily installed with heavy-duty, precision-punched 18-gauge panels, allowing for quick nut and bolt assembly. Each booth is standard with a bright white powdercoat finish, deluxe control panel, premium exhaust filters, hinged glass light fixtures, and high-quality tube-axial exhaust fan. Features and specs: * Commercial-grade design for optimal airflow and lighting coverage * Deluxe control panel included * White powdercoat panel finish (inside and outside) * Heavy-duty, precision-punched 18-gauge panel construction * Convenient 5/16 in. bolt and serrated lock nut assembly * UL Listed Dayton 24 in. tube-axial exhaust fan with spark-resistant fan blades * NEMA rated 2 hp, 3 phase, 230/460 V AC 60hz motor standard * Premium AFC exhaust filters * LDPI industrial light fixtures with inside access hinged glass door * (2) LPDI industrial (CLS1 / Div. 2) light fixtures – UL and ETL (Groups A, B, C, and D) * True 'daylight color' with GE T8 48 in. fluorescent lamps 32 watts, 2900 lumens, 5000K * Optimal airflow with CFM 7,983 at .5 static pressure * Inside dimensions: 13 ft. wide x 8 ft. 6 in. high x 7 ft. 6 in. deep * All assembly hardware, manometer, and sealant included * Meets or exceeds all applicable OSHA and HFPA 33 regulations * Easy to install, operate, and maintain
Not Yet Reviewed
$9,050.00
On Sale
The Ranger RS-500DS parts washers are designed with professional-grade features, including dual water heaters, adjustable thermostat, automatic low-water shut-off, stainless steel oil skimmer, and more to demonstrate Ranger's commitment to enhanced performance and productivity. These stainless-steel spray wash cabinets rapidly degrease all of the dirty parts in your garage or shop. From larger truck and SUV engine components, to even your smallest nuts and bolts, the Ranger RS-500DS spray wash cabinets will make your car parts shine like new! Features and specifications: * 50-gallon tank with heavy-duty stainless steel construction * Powdercoat finish specifically designed to resist rust * Neoprene-sealed wash cabinet is sealed with a leak-proof neoprene door that creates an edge-to-edge seal and prevents water and steam from escaping—keeping steam inside creates a better water retention which improves cleaning efficiency * Centrifugal commercial-grade pump/motor combination—made of high-quality parts like the rust-resistant stainless steel impellers and screw nuts (pump and motor is over-designed to last) * Contamination-proof interior welds cover the full perimeter of the inside of the spray wash cabinet, perfectly sealing the wash are from the detergent tank, and preventing any potential cross contamination that could potentially cause clogging is redirected and filtered out, eliminating downtime, and helping to make maintenance a breeze * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 180 degrees F * Hot cleaning—a nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * Automatic low water shutoff—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable parts tree and components basket is ideal for smaller cleaning components—instantly expands cabinet space and makes cleaning nuts, bolts, and screws as easy as placing them in the basket * Removable tank screen makes monthly maintenance easy, keeping your parts washer clean and ready to go * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm * Heavy-duty non-marring casters are impervious to harsh conditions and roll smoothly without leaving any marks behind—the casters provide easy movement, giving you the freedom to reposition your parts washer anywhere with ease and have an easy lock and release system that allows you to place your parts washer anywhere in the garage or shop * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * Friction-drive turntable system provides the power behind the parts washer which helps to eliminate potential motor damage by reducing the risk of jamming components
Not Yet Reviewed
$14,895.00
$14,345.00
On Sale
The Ranger RS-750DS parts washers have a 53-gallon tank and come with the latest features for rapidly degreasing the biggest car parts around—making it the ultimate answer to degreasing car parts of any shape or size. Built to last, these stainless steel spray wash cabinets allow for more space to fit more parts in at a time. With the extra room, you can clean and degrease automotive parts faster than ever before! Features and specs: * 53-gallon tank with heavy-duty stainless steel construction and powdercoat finish to resist rust * Commercial-grade pump/motor combination provides washing power—made of high-quality parts like the rust-resistant stainless steel impellers—while the centrifugal pump does all the heavy lifting (a protective covering comprised of 100 percent ductile cast iron and silicon carbide seals keep the machinery inside safe and dry) * Wash cabinet is sealed with a leak-proof neoprene door—creates an edge-to-edge seal and prevents water and steam from escaping to create better water retention which improves cleaning efficiency * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 175 degrees F * Safety switch and timer dial for a functional machine that is both safe and efficient * A nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * Contamination-proof interior welds prevents even microscopic debris from getting into the recirculating tank to help ensure nozzles and pumps remain unclogged, redirecting unwanted debris to the trap and filter * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Automatic low water shutoff feature cuts the power when the water level gets too low, saving your dual heaters from any potential damage—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable tree rack and components basket is essential for small parts and for maximizing parts washing space, the tree rack installs and removes easily instantly extending tank space and provides space for smaller parts like bolts, nuts, and screws * Convenient tank drain pipes help you maintain your spray wash cabinet by preventing debris from accumulating on the bottom * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm and can be easily removed to gain access to the cleansing tank for maintenance * Non-marring casters make maneuvering even this bulky piece of equipment a breeze and the urethane casters ensure that your floor remains safe * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * A friction-drive turntable is the system behind the parts washer, and it cuts out the risk of motor damage by preventing jams that might otherwise occur within the cabinet and tank
Not Yet Reviewed
$15,895.00
$15,295.00
BendPak TC-3000 boat trailer tongue platforms are one-of-a-kind units that offer a safe and simple approach to get your boat trailers onto a BendPak 4-post lift. With rugged stainless steel construction, the tongue platforms extend 20 in. from 48 to 68 in. between the runways on a BendPak or any 4-post lift that has a minimum center of runway width of 48 in. They are rugged and secure and slide breezily between the post, similar to that of BendPak's 4-post bridge jacks. There are no bolts or cumbersome installation procedures required. The front wheel of your boat trailer fits securely into the wheel tray, so it won't slip around as you load the trailer. The two back wheels of your trailer simple glide onto the runways. Once secured on the car lift, lifting and lowering your boat trailer is just a matter of operating the lift like you would if a car or truck were loaded. Convert your lift into a nautical-lifting dream machine with affordable BendPak TC-3000 platforms.
Not Yet Reviewed
$575.00
On Sale
Designed to keep your tools and parts organized and within reach, the WeatherTech ToolTrays are the perfect companion for all your vehicle and DIY projects. No more wasting time awkwardly stretching for oddly placed items, or fumbling around with weak, overly flexible trays that collapse when you pick them up. WeatherTech ToolTrays are made from the same durable material as their bestselling FloorLiner HP—and they will bend, but don't buckle, no matter where you place them. And when you do need to move your ToolTrays, convenient hand grips make it easy and spill-free. WeatherTech ToolTrays can also be safely laid on painted surfaces, protecting them from both tool and hardware contact. No matter what the project, the WeatherTech ToolTrays will keep everything you need at your fingertips so you can focus on the task at hand and stay in your groove. Work smarter, not harder, with WeatherTech ToolTrays! ToolTray Highlights: * WeatherTech ToolTrays comes in a pack of two * Thoughtfully-designed notches allow you to easily place and access tools, pencils, craft knives and more * ToolTray's scratch-and-UV-resistant material also allows for outdoor use, without the risk of leaking chemicals or color loss due to sun exposure * ToolTray's textured surface helps resist dust and particle buildup—unlike other competitive silicone products attract lint and debris * Three precisely-sectioned compartments keep smaller parts contained and organized, with an additional ribbing pattern that helps prevent parts from rolling away, no more sockets rolling down fenders or endlessly searching for stray nuts and bolts! * Sectioned compartments and a ribbing pattern keep smaller nuts and bolts hardware in place * Easy access hand grips on either side make moving ToolTray effortless * Built-in phone holder allows you to watch instructional and DIY videos in portrait or landscape mode, without the need to awkwardly place your phone in precarious positions—it also keeps your phone raised to avoid any liquid spills or splashes * ToolTray features curved inside corners and edges so clean-up easy—similar products make cleaning almost impossible * There's also a 10 in. ruler for quick and easy double-checking of bolt lengths and other measurements while you're in the middle of a project * This cutting-edge tool organizer is available in a bold red color that stands out, making spotting those small pieces of hardware trouble-free * ToolTrays include a hanger tab for pegboard placement that can be easily trimmed off if not used
Not Yet Reviewed
$33.95
$30.56
Baileigh Industrial BV-8M machine vises are built to last years in any shop. Designed with versatility in mind, they offer many features that other vises at this price don't have. Features: * 7 1/2 in. milling vise * Includes swiveling base * Can be removed from swivel base for fixed mounting * All steel and cast iron body * Reversible jaws for external work holding * 9 in. maximum jaw opening * 12 9/16 in. mount spacing (3/4 in. bolts) * 95 lbs.
Not Yet Reviewed
$668.99
If you're looking for lifting capacity and capability, the Ranger RML-1500XL Motorcycle/ATV lifts deliver! A long list of features includes an extended work platform, 12-gauge steel construction, built-in retractable swivel casters, reversible bolt-on side decks, a cheater ramp, automatic safety locks, support poles, and a single hydraulic lifting cylinder and retracting rear wheel deck. The RML-1500XL Motorcycle/ATV lifts are a combination of power, solid construction, and user-friendly features. While there are copycats everywhere, just because it looks like a Ranger doesn't mean it works like one or lasts as long. Ranger's RML-1500XL Motorcycle/ATV lifts are rugged and tough with the muscle to prove it! Features: * With little effort, you can easily position, secure, and raise motorcycles, bobbers, stretched choppers, trikes, and other wheeled and recreational vehicles with ease * Features 12-gauge welded-steel construction, a non-skid diamond-plate platform surface and full travel automatic safety locks that allow various working heights * Side decks can be easily removed to provide a more compact work area for closer access to bikes when performing maintenance work or cleaning detail * A humongous 1,500 lb. lifting capacity handles just about anything that rolls * Retractable, built-in, full-swivel casters provide stow-and-go capability even when loaded * Precision ball bearings improve rollability and are virtually maintenance-free * A gentle slope, textured diamond-plate approach ramps, and a secondary cheater ramp means even ground huggers can be loaded effortlessly * Lift gets its power from a potent commercial-grade hydraulic power system that produces big lifting muscle right off the ground—dual-function power unit provides either air or hydraulic pump operation * User-friendly controls increase productivity, reduce injuries, save money, and improve job satisfaction * A wide base frame combined with full perimeter tie-down rings provides a stable work environment ensuring bikes and choppers remain upright; tip-over concerns remain a thing of the past * Chrome alloy hydraulic cylinder provides smooth, controlled operation and an extended-stroke ram means the RML-1500XL stands tall for improved ergonomics * A rigid tubular-steel wheel vise provides better stability and features a hardened steel crank and ergonomic handle for fast and easy set-up. Durable non-slip rubber contact plates help protect expensive wheels. * A removable rear deck provides drop-down clearance and accessibility for wheel and suspension work * A secondary rear deck with built-in dyno-rollers makes easy work out of wheel rotations and turns your motorcycle lift platform into a motoring test simulator * Rear vertical support poles provide a secure and stable support for hoist straps, as well as tie-downs for elevated bike testing or other floating required services * A removable tool and parts tray can be positioned at multiple Quick-Lock positions located on the perimeter of the lift platform
( 1 )
$3,295.00
The iDEAL FP14KAC-X 14,000 lb. 4-Post Commercial Alignment Lift is a high performance closed front, cable pull vehicle lift designed for cars, SUVs, vans and trucks. These lifts come standard with full width rear slip plates, turntables, roll-back spacers, and internal air-line kit. They also apply the latest in design and safety features, such as: Narrow and wide runway mount positions, extended rise height, concealed hydraulic/mechanical cable lift system with slack cable safety devices, and durable pulley and shaft design incorporating convenient grease fittings to extend the life of the lift. Easy lift operation is provided with single-point pneumatic lock release and high-quality DURO power unit, while providing additional safety and protection with self-chocking ramps and included wheel stops. The modular design also provides the flexibility to extend the runways for aligning or servicing longer vehicles. The standard powdercoat finish, 20 in. wide runways, adjustable lock stops for easy runway leveling, and optional power unit mount positions complete the package. Features and specs: * 14,000 lb. capacity * High performance commercial alignment lift * Durable, high-quality cable lift system * Extended rise height * "Bolt-on" runway alignment kit * 166.7 in. max alignment wheelbase (2 wheel) * 157 in. max alignment wheelbase (4 wheels) * 182.5 in. max service wheelbase * 18 locking height positions * Full width rear wheel slip plates * Two turntable positions with spacer covers * 20 in. wide runways * Narrow and wide runway mounting positions * Single-point pneumatic lock release * Fully adjustable lock stops for easy leveling * Slack cable safety devices * Self-chocking approach ramps with nylon rollers * Wheel chocks (one pair) * Durable powdercoat finish * Standard included accessories: -- Internal airline kit with filter, lubricator, and regulator -- HD carbon steel turntables, 4.5K capacity each -- Rollback spacers for HD turntables
Not Yet Reviewed
$11,320.00
Rhodes Race Cars rear end housing narrowing fixture kits allow you to "slim down" your rear end to get some additional clearance. Available with 60 in. or 72 in. lineup bar, each kit includes pinion centering plate, housing end outer pucks, and outer diameter inner pucks. Choose the kit preferred for your application.
( 1 )
$674.95
—
$699.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
