Availability
Showing In Stock Items. Show All 15 Items.
P-Ayr replica long blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting. Save time, money, and hassle when it comes time to install your next power plant.
( 88 )
$499.99
—
$776.99
P-Ayr replica short blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting.
( 9 )
$410.99
—
$1,299.99
AEV fuel caddies are made of tough cross-link polyethylene, the same materials as many OE factory fuel tanks. The ingenious design of AEV's fuel caddies seamlessly integrates with their tire carrier and takes full advantage of the unused space both inside the wheel of the spare tire and just behind it. The result is 10.2-gallons of secure and nearly invisible fuel storage. The high mounting position isolates the fuel caddies from trail impacts, which makes them ideally suited for gravity fed deployment into the main tank. In addition, a fully vented, OE-quality cap means radical changes in elevation are no problem—and fuel fill-ups are fast! Additional features and benefits: * Will accommodate AEV's tire carrier with up to a 37 in. tire * Built-in footstep on upper right side allows easier access to roof racks * Molded in, full-color decals * Comes with a convenient shaker siphon for easy fuel retrieval Please note: Installation of the fuel caddy requires the use of a 17 in. wheel or larger.
Not Yet Reviewed
$385.00
Edwards Ironworkers offers 60-Ton Shop Presses with PLC (Programmable Logic Control) to enhance productivity. PLC improves press accuracy with precision pressure and increased efficiency with automatic returns, creating shorter cycle times—up to 50 percent time savings. Set your pressure with adjustable PSI. The magnetic base allows for easy mounting of the PLC anywhere on the machine. These machines are a perfect fit for shops that produce repeatable pieces that cannot justify a fully automatic press brake. Additional product details: * 1/2 in. and 3/4 in. heavy-duty steel construction * Easy-to-use foot pedal * Versatile rolling cylinder * Working area of 42 in. x 39 in. * Pressure gauge * Quick-disconnect hoses * Hydraulic-assist table height adjustment * 2 V-Blocks included With the Press Brake Tooling, your Shop Press easily becomes a brake. Check out Edwards' bump-die tooling, the 6-Piece Press Tooling Set, and the Press Brake Back Gauge. Edwards' 60-Ton Shop Press solves a variety of demands to improve user productivity. Smooth and precise, and both heavy-duty and versatile, the unique, open side design allows for material to pass through. Power it up with a factory installed PowerLink System or an Edwards Portable Power Unit.
Not Yet Reviewed
$19,110.99
—
$24,672.99
Need high production in a limited space? Baileigh Industrial BP-3305CNC press brakes offer programmable controls, top quality components, and heavy-duty steel construction at a great price point. Take your company's efficiency to the next level with Baileigh BP-3305CNC press brakes. Features: * Delivers 33 tons of pressure across 63 in. table * Runs on 220 V 3-phase power * Easy-to-use programmable 2-axis Estun E21 controller is integrated from the factory * Internal memory can hold 40 programs, each with its own unique number for easy identification * Controller keeps piece count for large production runs * Made with NOK, Siemens, and Omron components * Foot pedal lets you control all bending functions, whether on full auto or jog mode * Fully welded steel plate frame minimizes deflection and maintains rigidity * Integrated safety light curtains help prevent accidents * Tooling included: *78 degree gooseneck punch and a 4-sided multi-V bottom die --5/16 in. --0.39 in. --0.47 in. --5/8 in. --0.94 in. --1 1/4 in. --2 in.
Not Yet Reviewed
$24,749.00
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$4,554.82
—
$7,416.82
Ranger 1 1/2 ton Low Rider super-long jacks have a low profile and a long reach. With their amazing 34 in. long chassis and lowered height of 2 3/4 in., you will have no trouble reaching the factory-approved jacking points on most low ground-clearance vehicles. Their 3,000 lb. capacity is enhanced with an accurate direct-drive pump operation, making them the perfect combination of power and precision to accomplish much in your garage. Built to last from durable heavy steel, Ranger Low Rider super-long jacks offer a long lifting life that won't let you down. Other features include: * Swivel casters for easy mobility * Double-sealed hydraulics to prevent contamination * Safety overload system * Flanged side plates for increased strength
( 7 )
$575.00
Edwards Ironworkers' 20-ton shop presses may be small enough to fit on your work bench, but they're no lightweight. Smooth and precise, heavy-duty and versatile, their unique open side design allows for material to pass through. Power them up with an Edwards factory-installed PowerLink System or an Edwards portable power unit (230 or 460 V). Additional product features: * Compact and powerful benchtop press * Heavy-duty 3/8 in. steel construction * Cylinder with 2 in. Ram and 6 1/4 in. stroke * Rolling cylinder for maximum versatility * Working Area of 10 1/2 in. x 20 in. * Easy-to-use hand/jog controls * Quick-disconnect hoses * Hydraulic-assist table height adjustment (Also check out Edwards' 12 in. press brake tooling, bump-die tooling, the 6-piece press tooling set, and the press brake back gauge, available separately.)
Not Yet Reviewed
$4,797.99
—
$9,301.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
